TS2756 I have issue with Internet tethering on my iPad 4 that cannot be filed . I try many time and I update to latest vergin 6.1.2

I have issue with Internet tethering on my iPad 4 that cannot be filed . I try many time and I update to latest vergin 6.1.2

I'm always when I enter the detailes for user name and password automatically cleared

Similar Messages

  • TS3212 i.m having issues with reinstalling my Itunes.it says that my apple mobile device faild to start and will not go any further

    i'm having issues with reinstalling my itunes.it says that my apple mobile device faild to start and will not go any further

    Hey there CrazyTC,
    It sounds like you are unable to re install iTunes because the Apple Mobile Device service failed to start. Try restarting it with the following article:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/ts1567
    Windows Vista or Windows 7
    Close iTunes and disconnect the iPhone, iPad, or iPod touch.
    Click the Windows Start button .
    In the Start Search field type Services.
    In the Programs section of the search results, Click "Services".
    Select Apple Mobile Device and click Stop the service as shown below:
    After the service has stopped, click Start the service.
    After the Apple Mobile Device service has started again, open iTunes and connect the device.
    Then if the issue is resolved, set the service to start Automatically with the same article.
    If it is still not working, use these steps from the same article to completely uninstall iTunes and its associated applications and install a fresh copy.
    Remove and reinstall iTunes and AMDS
    If the issue continues after restarting AMDS, then you'll need to remove and reinstall AMDS and iTunes.
    Completely uninstall AMDS, iTunes, and all Apple software. Click the appropriate links below for steps:
    Windows XP
    Windows Vista, Windows 7, or Windows 8
    Restart the computer.
    Download and install (or reinstall) the latest version of iTunes from www.apple.com/itunes. Installing iTunes will also install AMDS.
    Restart the computer.
    Start iTunes and connect the device. It should be recognized properly in Windows.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • I had locked my iPad with a pin but then I forgot my password.i tried the pin many times and now my iPad is disabled.

    It displays that I hav to connect to iTunes

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

    Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

    That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
    Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
    These little tweaks are the only thing I HATE about upgrading my OS.

  • I am having issues with internet explorer showing my slide show ? does any one know how to solve this ?

    I am having issues with Internet Explorer showing my picture slideshow it works perfect in Google Chrome and Mozilla Firefox however there is just a blank white box whenever I go to Internet Explorer I'm using a free domain for testing purposes
    www.wethepeople.site40.net
    Can anyone tell me how to fix this issue

    Could you please try publishing the muse site to test Business catalyst site using publish button and check if you still facing the same issue?  Please share the link to test Business catalyst site you have created.
    Looking forward to your reply.

  • Wordpress website issues with Internet Explorer 8,9,10

    Hi,
    I have developed a website using Wordpress. http://www.worldretailcongress.cn/
    While I have no issues loading up the website on the Google Chrome and Firefox, I have been experiencing severe display issues with Internet Explorer. Sometimes the page appears to be broken.. while on other times, I cannot click through an action on the
    iframe.
    I tried using the meta tags <meta http-equiv="X-UA-Compatible" content="IE=Edge"> to force the page to load the latest engine...
    And then as described on this blog, I added yet another meta tag http://2slick.com/web/wordpress-problem-with-ie9internet-explorer-9/affordablewebsitestips/tutorials
    <meta
    http-equiv="X-UA-Compatible"
    content="IE=EmulateIE8">
    Could someone help me, how could I solve this?
    Best regards,
    Prashant

    http://www.worldretailcongress.cn/
    The only thing that I can load is your favicon
    http://www.worldretailcongress.cn/favicon.ico
    I was going to say that Modern.IE couldn't see anything either but while I was composing this it came back
    http://modern.ie/en-us/report#http%3A%2F%2Fwww.worldretailcongress.cn%2F
    Robert Aldwinckle

  • HT4623 i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off

    i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off

    You are as far as you can be with the original iPad; only iPad 2 and greater will update to 7+

  • Hot mail is not working after firefox upgrade. I am using Firefox 12.0. I did not have issue with hotmail, but I am facing problem this week .

    I am using Firefox 12.0. I did not have issue with hotmail, but I am facing problem this week after firefox upgrade. After entering login the page freeze. I am not able to continue.
    I reviewed the thread. I am not using Foxit.
    I reviewed hot mail forum. They suggest firefox upgrade causes this issue.
    I tried after clearing my browser's cache and cookies. The situation remain same. Any idea?
    What is the workaround?

    Firefox 3.6 needs the Java Second Generation Plugin which comes with newer versions than 1.6.0_03 - update Java, the latest version is 1.6.0_22

  • I have issue with my account acutely I can't download any application when I try to downloading any application it show my Apple ID has been disabled ,so please I want to get your usual support.  Beat Regards..

    I have issue with my account acutely I can't download any application when I try to downloading any application it show my Apple ID has been disabled ,so please I want to get your usual support.

    Sweet-jeje wrote:
    ... it show my Apple ID has been disabled ,..
    If disabled for Security Reasons... See here  http://support.apple.com/kb/TS2446
    If not for Security reasons...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Does any1 hav issues with not being able to send pic from the camera roll. I've already had issues with over exposure that the new update fixed but it left me with this issue.

    Since getting my iPhone 5 I've had camera issues. To start with it was over exposure, the camera was flashing too early and leaving me with dark pictures. After a failed reset I visited the apple store, where they told me it was a known problem and apple were working on a update to fix the issue and it was just a
    waiting game. Once the update was available I did it immediately and the problem seemed to be fixed. I've now noticed that from the camera roll I carnt send a picture to mms. It gives me the option but the screen completely freezes after I've chosen it. The only way to access my camera roll again is to completely close the camera roll down and reopen it. The strange thing it it will let me send it as an email and upload taught to Facebook etc just not as an mms. The other strange thing is if I go to msgs and add a photo I'm successful but if I try to edit the photo I want to send 1st then I get the same issue as the camera roll. I also have issues with the shutter taking ages to open. Is anyone else havin these issue before I go back to the apple shop. A complete reset hasn't worked

    Photo Stream only handles images and your videos are not uploaded or shared with other devices.
    Use iPhoto to import from your device. It can bring in the videos and image files.

  • TS4124 i didnt have issues with itunes before. but pc asked to download new version. i did. when i click itunes i get my original music, but when i click store...i get nothing. i watched tutorial...wont open itunes store. im looking for  music

    i didnt have issues with itunes before...but pc asked to download new version. i did. when i click itunes i get my original music, but when i click store...i get nothing. i watched tutorial....but still cant open itunes store. im looking for music to buy.

    Hello bogley
    Check out the article below for troubleshooting access to the iTunes Store.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G. 

  • How can I stop receiving email automatically from the community when they have issues with there problems regarding the apple products.

    How can I stop receiving email automatically from the community when they have issues with there problems regarding the apple products.

    Click here for the instructions on stopping the emails.
    (85713)

  • HT5521 I have a lightning to usb cable which is 2m in length.  Is there any known issues with trying to recharge an iPad 4 with this longer length.  It seems to me it is taking much longer than a 1m cord to recharge.

    I have a lightning to usb cable which is 2m in length.  Is there any known issues with trying to recharge an iPad 4 with this longer length?  It seems to me it is taking much longer than a 1m cord to recharge.

    Axel,
    I'm afraid a new SSD won't be different from your bad USB stick. I had similar issues over USB with both a (no-brand) stick and TWO 64gb Kingston SSDNow's (running Kubuntu 12.04 with Kernel 3.11, ia_64): it all runs exceptionally well (wanna know how it feels like booting in 5 sec?) for a few days - then suddenly you find yourself facing that dreaded (initramfs) prompt. You ask yourself: why? Did I upgrade grub lately? Did I upgrade the Kernel? I don't recall so. Ok, let's fix this... insert favorite live cd, boot, fsck...what???? THOUSANDS of errors??? Hundreds of files and directories corrupted, and the system is unusable - Reinstall everything from scratch onto another drive.
    Rinse and repeat: did this 3 times. Then I found this analysis:
    http://lkcl.net/reports/ssd_analysis.html
    I also suspect USB power interrupts more abruptly than SATA power, at shutdown - basically aggravating any power interruption damages. So now I'm going to:
    - buy an Intel S3500!
    - add commit=1 to my mount options in /etc/fstab
    - edit shutdown procedure to add a 5-10 sec pause after unmounting drives.
    Just my two cents.
    Andrea
    Last edited by andreius (2013-12-29 16:51:04)

  • Anyone have issues with Sata 3 SSD in the 2011 Macbook Pro

    Hi Guys and Gals.
    Does anyone have issues with the Macbook Pro 2011 Model with a Sata3 Solid State Drive ?
    I have issues and have a Vertex3 made by OCZ. I am in active discussions with OCZ to find a resolution on their end. I have also contacted Apple Care and Intel and have run into dead ends.
    However I am bringing my MBP for a repair, logic board replacement and will post the results after they change the logic board for me.
    Check my thread on OCZ: http://www.ocztechnologyforum.com/forum/showthread.php?89970-A-call-to-all-Macbo ok-Pro-2011-Users-with-SATA3-Issues
    Regards,
    Jase

    Well, my My Genius appointment went very much as anticipated - it might well be a SATA III connection but Apple they do not support SATA III drives - least of all other people's.
    Furthermore, they do not actually support anything other than the original configuration as sold - so given that I bought a 750 GB HD version, that is what I am stuck with - I asked Apple (London Regent St) if they could upgrade it to one of their own SSDs if I paid for it - they could not.  They can only repair the machine to its original condition. They could not even advise me as to what Apple co-branded SSD I should look for to be compatible with this model - 512 Gb drives do come up on Ebay - Apple / Toshiba seems to be the normal one - but they couldn't advise if that would work or not. So it could be good money after bad.
    Anyhow, they finally agreed to swap the cable, for a charge, so that will take two or thee days, plus the 5mins to do the job.  I will post the results of the cable swap when I have it. They could not tell me whether it would be a different version of the SATA cable to the one already in the machine - but I asked to keep the old one so I can see if there is any visible difference.
    It does seem strange that Apple support thunderbolt drives - which you can't even buy yet, but don't support SATA III in either Mac Pro or MAcBook Pro given that the full 3.0 standard was released on May 27, 2009.
    Two and a bit years is a long time in tech terms.
    Stephen
    eni wrote:
    I, as so many others, are also facing issues with my SATA 3 SSD. I've been reading about people having issues on OCZ's forum, on Intel's forum and all over the web. I have a MBP 2011 13" bought last month with the 6/6 setup.
    Hotjase, have you come to understand that the issue lies with the logic board? One would hope that Apple would owe up and come forward if there are in fact faulty logic borards. I have read that Apple have gone from 6/3 to 6/6 and then back to 6/3, though I do not know if this is applicable to all MBP models, or just some. As I sayed, I have the 13" model.
    SdeS, what was the result of your talk with the Genius? Did you receive a new cable? If so what result?

  • After the IOS 7.1 update I have issue with Game Center, I'm not been able to  load the  games. The apps don't seems to be able to connect to game centre. How to resolve the issue?

    After the IOS 7.1 update I have issue with Game Center, I'm not been able to  load the  games. The apps don't seems to be able to connect to game centre. How to resolve the issue?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

Maybe you are looking for

  • Error in iMovie about Disk Space after upgrade

    I just upgraded to Mountain Lion. I created a movie in iMovie and when I tried to export it to YouTube, I got an error message about no disk space. I have over 700GB of space so I don't think that's the issue. I tried upgrading iMovie but it's asking

  • PC to Mac: Transferring music NOT WORKING!!!!!!

    hello! perhaps i've been staring at this new wonderful new mac for too long, but i CANNOT seem to transfer my iTunes library from my PC to my new Mac. i followed ALL the instructions from the apple website (http://support.apple.com/kb/HT1329). on my

  • Issues saving images from Scanner since upgrading to Maverick.

    Hi, I'm having issues with my HP Scanjet 4070 photosmart scanner saving images since upgrading to the Maverick operating system.  If it allows me to save, the image comes out as blocks or lines of color.  Other times I get the message "An error occur

  • Customer  month wise sales

    Dear All Any Standared Report Available Customer  month wise sales available? Thanks and Regards Suresh

  • (Mac) Illustrator CC 及び CC2014 で文字入力中にクラッシュ

    お世話になります. Mac版 Illustrator CC 2014にて.文字入力をしようとした所でクラッシュしました. そこで前バージョンの Illustrator CC をCreative Cloud Packagerでパッケージを作成後インストールし. 同じように操作してみましたがやはりクラッシュします. 考えられる原因は何があるでしょうか? 尚OSはアップデート済.Illustrator もアップデート済です. よろしくお願いします. その時のログ (Illustrator CCにて)