TS2771 itouch 4th gen camera will not open?

Can anyone point me in the right direction? Our itouch 4th gen camera shutter will not open.
Thank You!
Ava

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:                                 
iOS: How to back up           
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar          

Similar Messages

  • My nano 4th Gen. ipod will not sync album I just purchased from itunes.  It says it is syncing but does not. Can anyone help?

    My Nano 4th gen. ipod will not sync my new album I just purchased from itunes store.  It says it is syncing but does not transfer music.  can anyone help?  I am using windows 7.
    thanks,
    B.H.

    yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed.  click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
    click on music check mark music done and sync
    problem solved
    thanks apple

  • My iPhone camera will not open up. When I press on the icon it open and closes quickly. When I open it from my home screen it reboots my phone. What should I do?

    My iPhone camera will not open up. When I press on the icon it open and closes quickly. When I open it from my home screen it reboots my phone. What should I do?

    Tried that and it still isn't working. Not sure if it's software thing but I just noticed when I swipe up my control center the flashlight option is not available as well. I'm not sure why this is. I have a 5s with the newest software. That's for the suggestion

  • I have Adobe Elements10. The RAW images from my new Canon G16 camera will not open. Do I need an upgrade?

    I have Adobe Elements10. The RAW images from my new Canon G16 camera will not open. Do I need an upgrade?

    carolweiler wrote:
    I have Adobe Elements10. The RAW images from my new Canon G16 camera will not open. Do I need an upgrade?
    See:
    Camera Raw plug-in | Supported cameras
    You need the 8.2 version of the ACR module, and PS10 is too old to be updated.
    So, you can choose between 3 solutions:
    - update PSE to PSE12
    - use the Canon software to convert the raw files to the tiff format which PSE10 can handle
    - download and install the free Adobe DNGconverter which is able to convert a whole folder of CR2 raw files to the Adobe DNG raw format which PSE10 can handle.
    The last two solutions are free.

  • Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not compleet. the ipod will not do anything at all... please help me

    Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not complet. the ipod will not do anything at all... please help me i havent got  extra money to spend..

    Just what happens when the restore does not complete?
    Error message?
    Does it freeze? Is so what is listed in the status bar of iTunes?

  • Camera will not open need help

    i have the 4th generation ipod touch and i have very few complaints the only thing i can really complain about its that when i try to open up my camera instead of opening up the screen stays black is there anything i can do to stop  this from happening

    I am trying to open some *.avi files in quicktime, they are from my security camera at home.  It will not open them, would anyone be able to help me?  It says I need a plugin but it does not tell me which one.
    Basically your player is telling you that you need to install the codecs that will play the compressed data within the AVI file.
    AVI is a legacy file container in which the tracks of data are interleaved to maintain synchronization. This data can be encoded using many different audio and video codecs. Your problem is to determine which codecs you need for the player you are trying to use and install them if they are available. Failing that, your will either have to play the files in a different player which has the codec support your require built into the app or convert the content to a compression format that is natively compatible with the player you wish to use.
    Since you have not stated what platform, operating system, and particular player you are targeting for playback, it is difficult to provide precise instructions for fixing your specific problem at this point. Suggest you try alternative players compatible with your system and platform to see if they will play the files, use a dedicated media information utility to determine the codecs needed for playback, or post a sample file for analysis.

  • Ipod touch 5g main camera will not open

    Brand new Ipod touch 5g. Camera will not not open, facetime camera works fine. I have tried reset.

    UPDATE
    I restored the iPod via my Mac, downloading a new software file from iTunes.  After that, it works fine.  Updating to iOS 8.02, the new iTunes, and Yosemite worked to fix this issue.

  • Ipod touch camera will not open

    after my first video with the ipod touch the camera would not open back up.Then i restored it and it worked fine until my next video then it froze up again.
    does not do this while taking a picture

    Try holding dwn the home button and the turn off button and reboot that might wrk

  • Help - Itouch 4th gen camera/photos

    I have an Ipod touch 4th gen.  All functions were working properly until around a month ago. 
    When I take pictures from either side, the photo does save and I can open it in photos.  However, when I open the photo, it is very blurry.  When I press edit, the picture is clear, but I cannot save it this way.  When I press save, it saves back to blurry.  ALSO, after around an hour or so for ANY photo, when I go back into photos each picture is this white icon with a grey rectangle in the middle.  I basically can't take photos with the itouch.
    Video camera functions like facetime and skype work perfectly fine.  Both my and the person I'm talking to's video resolution is fine.  Facebook/instagram works fine. 
    In ITunes, when you plug your ipod into a computer, there is a bar showing % of storage used by music, apps, other, etc.  Before these glitches, photos took a signifacant portion (It's bar colour is red).  However, now, even if I take say 100 pictures and within the hour they're still visible but blurry, it will not show that I have any storage used by photos on my ipod.
    I have scoured the internet for solutions, and before I go into the apple store, I was wondering if anyone had the same problem.... it does seem kind of random. 
    Thanks, I appreciate it!
    Product: Ipod touch 32GB 4th gen
    latest operating system
    no previous history of these problems

    Try the standard fixes:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • IPod 4th gen grayscale will not detect usb connection.

    Hello everyone, I have a iPod 4th gen grayscale and I'm running Ubuntu, everything has worked well for about a year now, I have been syncing my iPod through VirtualBox with Windows XP for as long as I have been using Linux, though, for some reason, my iPod has stopped noticing my usb being connected, I know it's not the usb cable, or the usb ports, I have restarted my iPod and put it into disk mode, still no luck, restarted my computer, Linux will not detect anything plugged in, nor will Windows, though my iPod shows the battery charging when plugged in, but iTunes will not detect the iPod.
    I have switched the hard drive of the iPod out seeing if that was the problem, still no luck, my car dock will pick up the iPod and play music, so will my other docks, I thought it might of been Linux at first, so I plugged it into my desktop with Vista, it also will not detect it.
    Does anyone have an answer to this riddle?

    A bad USB hub will cause the problem ... are you using it ??

  • 4th Gen iPod will not mount or connect to Windows

    Hi, one of my iPods will not connect to Windows XP. Its a 4th Gen 40gb non photo iPod
    The iPod still plays and works "normally" as a portable device (ie I can play music), but I cannot connect it to my pc at all.
    When I plug it in via either USB or Firewire ports the iPod disc whirrs and gets stuck in a loop (that can last over 2 hours plus) before i need to reset it in order to disconnect it from the pc.
    When I connect, it doesn't launch iTunes as it should.
    It doesn't appear in My Computer.
    It doesnt appear in Computer Management>Disk Management
    Latest iPod updater cannot read it (even when put in disk mode) and tells me that it can't mount the iPod.
    Also, the iPod has since started to mess my PC up - it will not allow the PC to boot up with the iPod connected. If I connect the iPod to the PC with iTunes already launched it causes iTunes to freeze and crash. When I go to restart the PC, Windows will not shutdown.
    Getting sick now - any ideas please (besides throwing it out the window!)?
    It's weird how the iPod still plays, but it will not connect to the PC when my other 4G 30gb photo and Shuffle will.

    I have tried resetting and restoring the ipod before, and I have put it into disk mode too (in order to restore it) but the ipod updater said it could not mount it
    However, I did try Deanz advice by putting it into disk mode whilst attached to the mains and then connecting it to the PC has at least enabled me to see it in "My Computer" for the first time as (the "F" drive), even if iTunes is not recognising it.
    However, when I attempt to see the ipod in Disk Management I get the same problem outlined above in an earlier post (grey screen).
    If I try to browse the iPod via My computer that task freezes. Task Manager claims the function is "not responding"
    Grrrrrrrrrrrrrrrrrr
    Anyway, all my music is backed up so that's not a problem. The iPod works, but I can't update it so it could be worse. Not really sure how to remap the iPod to a different drive letter
    [edit] During the process of closing down the non-responsive "My Computer", Windows had a major gimp out and completely froze me out until I reset the ipod an put it back into disc mode (again). Then Windows reappeared in the same state before it crashed. I suspect this is due to some kind of conflict with the iPod as it has done this a few times now since my iPod started acting up (and only when the iPod is connected).
    Thinking of some elaborate home insurance claim now..............

  • Ipod 4th Gen camera shutter wont open

    I recently updated the Ipod to ios 6.1.6 but the camera shutter wont open and when i save photos from apps like safari it saves them then instantly deletes the photos I just told safari to save. this is my first apple product and to be honest with this much problems i'm actually considering a more Linux based device. but if the apple community can help me in anyway to fix my expensive device it would be appreciated.

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                                              

  • Yesterday my camera was working -- after syncing Picts to my iPad, my camera will not open. Can someone help me?

    P

    I had an update on ios and my camera works like it did.  I was fooling around and found the camera icon at the bottom of my ipod next to the "slide to unlock" bar.  If
    I slid the camera up, my camera window would open.
    Thanks alot for your advise.

  • I am unable to access the vedios on Blueservo, i can access the site but the cameras will not open.i

    After I access the site I cannot open the live cameras. This site works when I use Internet Explorer, But i prefer to use Firefox. your help would be appreciated

    I've used Firefox for years at this site and would like to help you by walking you through it one time. Are you a confirmed virtual deputy?If yes when you access the site you will get a sign in box if you double click you will get your virtual name to sign in on,'''Click''' the screen changes and a Blue servo page comes up you,"Click"on close.The page showing all the cameras and numbers will be displayed now, you click on the number of the camera you wish to see. that page closes and another page comes up showing two video screens the one on the left will start to load with your video playing and if not you are having problems that I can only recommend visiting contact support at Blue servo.net

  • My camera will not open. Any suggestions? I click the app for it, but then it stays closed on the screen.

    Whenever I click the app for my built-in camera, shutter screen never opens to view anything. It works whenever I take a picture through a msg but not whenever i directly click the camera button. Help?

    If the Reset Ian mentioned doesn't work...
    Shut down and restart the Mail app...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Tap and hold any icon in this list until they wiggle
    - Press the red to delete the Mail app from this list.
    - Press the home button twice when done.
    - Restart the Mail app

Maybe you are looking for