TS2771 itouch stopped working with Bose sounddock after software update 5.1.1

Have an iTouch that used to work well with Bose SoundDock. Then updated iTouch software to version 5.1.1 and as usual apple ITouchOS now does not recognize the Bose SoundDock at all now. Error message iTouch does not support this accessory. What the heck? How to fix? Buying new dock is not solution. iTouch is gen 4.

You can try the standard fixes:
Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
- If still the problem then it appears that the iOS update broke the compatibility. That happens sometimes. In that case you have to wait for an update from either Apple or Bose.
- Also, use the communities search box in the upper right and search for. bose. I think other users had same problem. It is hard to remember the dock manufacturer.

Similar Messages

Ipad2 stopped working with zeppelin speaker after software install?

I have recently installed the latest software upgrade for my ipad2 and it is now not playing through my zeppelin speaker although my iPhone had the latest upgrade

The inference is that the speaker is working with your iPhone after the same update. If that is correct then I have no other suggestions other than 1) checking the connection, and 2) reading the last part of the attached link concerning the side swithc for it is there that so many fall foul! http://support.apple.com/kb/HT4085

USB Audio stopped working on 27" ACD after software update 1.0

Hi all,
My 27" ACD worked flawlessly until I installed 27-inch LED Cinema Display Software Update 1.0 earlier tonight. I have a unibody MacBook Pro that doesn't output audio from the mini displayport, when I got the ACD Friday, USB audio output worked fine. I also have a 24" ACD and audio worked fine on that as well. But after software update 1.0, I can no longer get audio output of the 27" ACD to work via USB, I even rebooted my Mac and it still doesn't work. After trying it a few times in Sound.prefPane, I now can't even select the "Display Audio - USB" option (when I click on it it reverts to the other option right away).
From /var/log/system.log, I believe this is the error related error message:
System Preferences[332]: Error ^P trying to set sOut device to 264
Message was edited by: ayn

I have this problem too. I have the 27-inch LED cinema display connected to my Mac Pro 1,1 via the Radeon 5770. I also suspected it had something to do with the machine going to sleep, but the audio doesn't disappear every time it goes to sleep. Unplugging the monitor fixes the problem.
I also noticed that when the sound has went away, if I try to change the volume there will be a long delay before seeing the volume-change graphic. Also, toggling the sound device in System Preferences while the problem is in effect is unresponsive, sometimes giving the beach ball. Finally, this message is seen in console logs when the sound has went away:
10/19/10 6:01:22 PM kernel USBF: 75053.200 AppleUSBEHCI[0xf3d0800]::Found a transaction which hasn't moved in 5 seconds on bus 0xfd, timing out! (Addr: 5, EP: 0)
I can make this message appear on demand by attempting to change the volume.
If (when) this happens again, I'm calling support.

Keyboard stops working for the finder after software update 10.5.7

It is working for any other application, but in the finder I cant use any shortcut, quick view, rename files etc...
I have tried rebooting and for a couple of minutes it was working fine, but then it stop working again.
I have also try repairing permissions with DiskUtility ands running scripts with Cocktail, but the problem remains the same.
Any ideas?

Hi Carlos,
It's a bit of a longshot, but have you tried trashing ~/Library/Preferences/com.apple.Finder.plist?
Yang

My iPod Touch is not working with Bose SoundDock. How can I fix it?

My iPod Touch is not working with Bose DoundDock Series II. Can anyone suggest how I can get these 2 to work together?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one with a new battery for $79 Y can do the exchange at an APple store or sent it in.. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace your battery for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery yourself if you are up to it. Y can purchase a eplacement battery for about $10
iPod Touch Repair – iFixit

My ipod stopped showing up in itunes after software update

i have an ipod nano and an ipod classic and they both stopped showing up in itunes after i updated the software. please help

Have you tried here:
iOS: Device not recognized in iTunes for Windows

IPod w/video works with Bose Sounddock

Just received my black 30GB iPod. I haven't seen it personally since I'm at work, but my husband is getting it all setup for me. He checked it in his Bose Sounddock and it works fine. So glad they left the width the same! He says the decreased thickness isn't a problem with the sounddock. I will be trying out other accessories this evening. Docks, headphones etc.

Well since ITunes uses "Quicktime" you are going to have this problem with MPEGs files that are "Muxed" or Multiplexed where the MPEG Container contains the audio and video in sepearte files. Read these:
IPOD Plays Video But No Audio when Converting With Quick Time Pro:
http://docs.info.apple.com/article.html?artnum=302588
Quick Time: Using MPEG 1 and MPEG 2 Files:
http://docs.info.apple.com/article.html?artnum=61608

IPod Nano case that will work with Bose Sounddock

I got an iPod nano case, and it extends a little bit, and this prevents it from connecting to the Bose soundock. Is there a case that is transparent that just goes around the iPod nano without extending a few millimeters above or below it?

I bought a 5th Gen. 80 that had problems and had to be returned. I had to wait on the release of the new ones b-cuz they didn't have anymore. I bought the 160 GB and despite the claims that everything I bought for 5th Gen. would work with the Classic except the case, I found the opposite. All my cases and armbands work with the 160 Classic that had worked with the 80 5th Gen. I have a silicone, two hardshell, an armband that were all bought for the 80 5th Gen. You actually might be better off as far as money b-cuz a lot of stores Target, Wal-mart, and even Bestbuy put all these itmes on clearance sale not realizing this and of course APPLE is not telling b-cuz their greedy butts want you to spend more $ with them (I discovered this when contrary to other claims none of my A/V cables and dock work).

FaceTime and Messages stopped working on my MacBook after I updated to Yosemite. Handoff does not work either. How can I fix this?

Before I updated to Yosemite, I could FaceTime other people and Message other people with the MacBook Pro apps. However, after I updated to Yosemite, they stopped working. I get "not delivered" feedback on Messages, and "call failed" on FaceTime. I made sure that both have the correct emails checked and unchecked in the settings as my iPod, and made sure that the "make calls from" or "begin new conversations from" coincide with my handheld Apple media player.
Am I not doing something? Am I doing something wrong?
Any feedback would be appreciated!
Thanks!

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Why doesnt foxyspider work with 26.0 after auto update

I was using foxyspider successfully for several months until firefox auto updated to version 26. After the update it will no longer download. All other functions work but files will not be saved. A new page will open and thumbnails are visible, but when the option to save files manually or select all files is chosen and a location is selected to download, nothing happens. Again, it worked properly with the previous version of firefox.. I have contacted the developer of foxyspider twice but have received no reply. If it does not work anymore, I will have to give it a poor rating. Before firefox 26.0 foxy spider was 10 of 10 but no it is a big zero.

Hello rickster_too,
Thank you for contacting Mozilla Support. I'm sorry that the Foxyspider developer has not gotten back to you.
Have you tried uninstalling and reinstalling the extension?
It looks like the developer isn't very active on his social media channels, but you might try reaching out there.
https://addons.mozilla.org/en-US/firefox/addon/foxyspider/
And there are a number of other addons that you can try that will work with FF26. Here's a list of similar addons that Mashable put together.
http://mashable.com/2007/07/31/firefox-downloads/
Please let us know if this helps.
Cheers,
Patrick

TS3581 Won't work with my car after iOS7 update, at least one other friend is having the same issue today.

I updated my iphone 5 to iOS7 and it no longer works with my car's stereo. My boss is having the same issue. Anyone else? Ideas on how to resolve this?

More details would ne nice such as what make of car?
When I upgraded to my iPhone 5, a friend was complaining that his iPhone 5 did work in his car. I took the Apple 30 pin to Lightning adapter out of my car and replaced his third party one and it started working.
Allan

Problems with monitor/resolution after software update

I installed the latest security update tonight, and now my monitor no longer properly works with my mini. I have a Dell 2005FPW. I was using 1680x1050 resolution with no problems. When I rebooted after the update, I noticed my resolution had been changed... and now the mac only detects my display as a "VGA display" and I can't select that resolution any more! The monitor still works fine with my PC.
How can I get my 1680x1050 back??
Mac Mini Mac OS X (10.4.5)

Do you have a KVM switch to share your monitor between your Mac and your PC? I was getting this problem when I got one of these so my new Mac could share my monitor etc with my old one but found a way round it. In System Preferences -> Displays, tick the 'Show displays in menu bar' box. Then click on 'Detect displays' from the drop down menu. The screen will go blue for a moment and the computer will recognise the monitor for what it is.
Mac Mini 1.4GHz G4, PowerMac 450MHz G4, both Mac OS X (10.4.6) Airport Express

Problems with LG Enact after software update to KitKat

After the update, I seem to have
1) Battery charging issues. Problems charging past 96% (or at least appears that way on the notifications bar on my phone). Have had to unplug and/or restart phone to complete the charge and sometimes it doesn't always work.
2) Slower 4G speeds. Often going down to 3G or 1X
3) Phone seems sluggish overall going from app to app and also when typing on the keyboard
4) Freezing when using wifi or phone data plan.
I've googled these problems and appears that other phones have been having one or more of these issues as well. Any ideas on how to fix these issues?

If you've googled, then you likely have seen some of the suggested "fixes". Have you tried:
1) Check your network settings - be sure it'[s set to LTE/CDMA - I've noticed that updates and resets on my phones tend to revert to Global which results in glitchy behavior, at least for me. Resetting to LTE/CDMA and restarting helps.
2) Run a system cache clear, it won't affect any of your data or setting but WILL clear up unused fuiles and processes that may be slowing things down and causing the sluggishness you see.
Performing a wipe cache partition removes any temporary files that may be causing an issue with the device. All personal files and settings are not affected by this option.
Power the device off.
Press and hold the Volume Up and Down button then press the Power button.
When presented with the Boot Mode Selection Menu, release all buttons.
Press Volume Down button to select 'Recovery' then press the Volume Up button.
From the Droid triage screen:
Press and hold the Volume down button.
Press and release the Volume up button.
Release the Volume down button.
Select wipe cache partition then press the Power button.
Use Volume keys to navigate options.
Select reboot system now then press the Power button.
Use Volume keys to navigate options.
3) FDR - Factory Data Reset - be sure all your contacts, photos, etc are backed up - if you use Google to store contacts and auto back up photos and music it should already be backed up. Once you do the reset, restore from Google, and selectively reinstall your apps. This is a last resort, but it can clear out a lot of accumulated gunk.
Hope this helps.

MAC LED lights three times with clicking noice after Software Update

Hi all!!! I am a new Mac user. As recommended i have been regularly updating my OS (software updates). After updating, as mentioned, the MAC restarts. But during restart it tries to restart three times (the LED light on the bottom right corner lights u

I'm a bit confused here so I hope to clear things up in your post.
You're Device is listed as Z10 (unless you've updated within the last 2wks of this post).
Mac Desktop?
- did you mean BlackBerry Desktop Manager for Mac?
- or did you mean Z10 BB10 OS updated to 10.1? (which provider)
If on Z10 you mean you updated to 10.1 I hope you're not using a leaked BB10.1 release (that's going to cause you nothing but issues down the road if you're not sure what you're doing, trust me i thought I did myself lol).
Keyboard:
Have you checked in Settings > Keyboard for any entries you custom added or shortcuts that auto correct? If you're not sure you can clear them ALL out, close your apps on your Z10 and retry say an email with a paragraph and see if that fixes it?

TS1996 my zero key does not work as it should after software update any help

my zero key does not work after a software update when i try to use it /pp0 then volume symbol appears on the screen just happened after the update

Hello, pakie1.
Thank you for visiting Apple Support Communities.
Here is a troubleshooting article that you may find helpful when experiencing keyboard issues.
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Cheers,
Jason H.

TS2771 itouch stopped working with Bose sounddock after software update 5.1.1

Similar Messages

Maybe you are looking for