TS2771 my ipod sank in water by accident for 1 hour, after lay drying for 1 month, I connect it with my Mac, it show a dark apple and began to charge, after few hrs, became a dark screen, what can I do? I love this ipod very much as it's a present from my
My ipod sank in water by accident for 1 hour, after lay drying for 1 month, I connect it with my Mac, it show a dark apple and began to charge, after few hrs, it showed fully charge, but after I pressed, it became a dark screen, but it shows a dark apple everytime I connect the Mac, what can I do? I will try my best to save it, I love this ipod very much as it's a present from my dear.
After drying for a month and it's still not working, it's almost certainly suffered hardware damage and will need to be replaced. You can learn what Apple will charge to replace it here:
http://www.apple.com/support/ipod/service/faq/
BTW, you posted originally in the iPod touch forum. It's best if you post in the forum specifically for your product; you'll get the most applicable responses that way.
Regards.
Similar Messages
-
I Have just tried to update my iPhone 5s to iOS 8.1.2 but my phone has frozen on the update screen what can I do to solve this problem
Hi Michaelcampbell1980,
I understand that you have run into an issue while updating your iPhone. Here is an article that will help you address this issue:
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT201263
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
my ipod touch 1st gen has gone into recovery and wont restore because of a error 1 or something like that can someone help me quick this ipod is my little cousins and i dont want her mum to find out what happend
I have not seen a solution for error (1)
make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
i was doing a software update downloading ios 6.1 and the phone froze half way through the download i tried to restart the phone by pressing the power button and the home button but its just a apple on the screen. what can i do to fix this??
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps..
But... if the Device has been Modified... this will Not necessarily work. -
After I downloaded the update of iOS 8.1.3,I was unable to install it and I see "an error occurred installing iOS 8.1.3"what can I do?
Hi Josephineapo,
If you are trying to update your iPhone over-the-air rather than through iTunes, and you are having issues with installing it, then I'd like you to please follow the steps outlined below.
If you get a message that "an error occurred downloading iOS," try again later. If the issue persists, try updating your device in another network or use iTunes to update your device. Learn more about iOS updates.
Update does not complete
If you're installing the update and the progress bar appears to move slowly, be patient. The time an update takes depends on the size of the update and the number of files on the device.
When you're updating over the air, keep your device connected to a power source so that it doesn't run out of power. If your device does run out of power, connect it to a power source and turn on the device to let the update or restore complete.
If the update never completes and the progress bar hasn't moved for an extended time, try restarting your device. If you still see the issue after you restart, see what to do if your device appears frozen or won't start.
Resolve issues with an over-the-air iOS update - Apple Support
Thanks for using the Apple Support Communities!
Cheers,
Alex H. -
Since I upgraded to iOS 7.0.4 on my iPad 3, my battery capacity has drained almost 10% per hour without any use of the device. Prior to the upgrade, the battery charge would hold during periods of inactivity. What can I do to solve this significant problem? Is there a way to uninstall iOS 7.0.4 and return to the previous version?
Downgrading isn't supported.
You can poke around in the settings. There's a lot of stuff defaulted to on that you may not need, such as notifications.
You can also look into background app refresh and background app updates. They can be running in the background and drain your battery. -
I just got my new iphone 5 and had to upgrade my mac (version 10.5.8) version of i tunes. Trying to install and it says i need 10.6.8 or later. What can I do to get this phone installed?
Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so Contact Apple in your Country to Purchase a Snow Leopard Disc...
http://support.apple.com/kb/HE57
In the US...
1-800-MY-APPLE or 1-800-676-2775
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading... -
I use windows vista and I have upgraded my itunes. Now when I open it, it gives me a message saying "itunes has stopped working" and then gives me a message saying it will notify me for a solution. What can I do to fix this so it can open and not give me any more problems???
First you can try;
Try restarting PC and run itunes again!
If error again than perform clean instal of itunes (uninstal first and than instal again)! -
Since installing 10.7.3 my downloads say that I do not have enough space on my computer for the download. These downloads are never more that 200 megs or so and I have 270 gigs left on my hard drive. Somehow the remaining space on my hard drive is not being correctly read. What can I do to fix this? I have run permissions repair several times, but to no avail.
Th downloads do not finish. I am dowloading to a file on my desktop called MUSIC, but it first starts to download to my desktop and then I move it to the MUSIC file also on my desktop and I have been doing this without incident using 10.7.2 as well as 10.7.1 and 10.7.
-
I just purchased and installed a Canon Pixma MG5220 printer/copier/scanner to my PC desktop with Windows XP. It works fine. It has been successfully installed on my network and I am able to use it with my laptop running VISTA. However, I am trying to connect it to my MacBook Pro OS 10.6.8 and I am not having much luck. I can see it as one of the printer choices when attempting to print; however, I get the following message:
NT_STATUS_ACCESS_DENIED
I have been searching for answers, but nothing seems to work yet. Does anyone have any suggestions?
Thanks.Let me understand:
- you have purchased named canon, which is conencted to your PC running windows xp
- downloaded driver for win xp, and canon works fine
- canon is connected to that PC via USB
- that Canon is also activated as network printer, by allowing print sharing in windows; how did you set that option?
- now, you are in Mac OS x 10.6.8, downloaded Canon driver for Mac OS X, installed it, detected printer on the network, printer was installed; was it detected as attached to that PC running win XP? or not?
or you set canon by being connected to your mac directly via USB?
Now, there are some questions you should answer as some details are missing, and your initial text is not clear. Can you print if Canon is connected directly to your mac? did you try that? if not, do it before answering. -
I was try to reset my ipod suddenly it freeze. Now i can't open my ipod, I just see the apple logo. not responding or anything. please help!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iphone 4 lock button is broken but each time i click on an app, the screen will turn black and go back to my home screen. How can i fix this?
Basics from the manual are restart, reset, restore. Try them.
-
My itunes always crashes when I turn itunes on and leave it to play any clues to stop this it is annoying the **** out of me.
My itunes always crashes when I turn itunes on and leave it to play any clues to stop this it is annoying the **** out of me.
-
It was working last night. However, in the middle of me talking to a family member in the messenger box of facebook. It just wouldnt allow me to type anything anymore. I closed it and re-opened it, but it didnt allow me to restore my sessions. I tried it again today, and it worked for a few seconds, albeit very slowly. Now, it just wont work. It opens to the Firefox homepage, but it wont do anything else.
I let Firefox sit on my desktop for about five minutes, and it finall allowed me to use it. That is EXTREEEMELY slow. What is the problem?
-
I am having trouble send messages with attachments in Mail. Even small attachments (130K) Mail tries to send, then gives up and the message sits in my out box. How can I fix this?
1. You need an external DVD drive.
2. There are no Mac OS X applications or other software in the iTunes App Store.
(116312)
Maybe you are looking for
-
How can I read a form using session in javaServerlet?(thanks)
How can I read a form using session in javaServerlet?(thanks)
-
Photoshop CC can´t open .PNG files?
I can´t seem to open .PNG files with Photoshop CC. Looking around the net for answers i found out that resetting your Photoshop preferences might be able to solve the probem. This unfortunatly creates a new problem, how do i reset the preferences in
-
Hi All, I am developing new workflow (AP:Employee Verification).This workflow gets initiated by running a report and report executable is having procedure distibutempverifiction ( p_card_program in number, p_employee_id in number, p_status_lookupcode
-
Convert Native 16:9 SD to HD
Hello all, I have a production that was shot a while ago in SD, but it was shot in native 16:9 SD (non anamorphic). The client now needs the footage from this same production in HD because they are going to be running it on television. The TV Station
-
Consistent Error Message: Key not valid for use in specified state
For several years I have been trying to use iTunes. Without success, I decided to try to reinstall the program and now I am getting the above error message.