TS2776 why does my computer give me a cant find files notice when syncing my ipod? only about 1/2 of the songs transfer to computer out of the ipod. and the file must be on the ipod because i can play the song on it. i want to transfer all songs to my ipa

why can't i transfer all songs on my ipod to my computer and then to my new ipad? i keep getting a message saying that about half of the files couldn't be found, and only about 1/2 of the songs went to the ipad when i first synced. the files must be on the ipod, because i can play all 448 from the ipod when disconnected from the computer. and all songs show up on my devices at itunes and can be played on the computer. but only about 1/2 are going to the ipad. i am no tech genius, obviously, but could someone please help me? thanks

Apple does not support transferring files from the device to the computer if they are third party.  It is great that you were able to transfer the ones you did.  There is a way to do it but it sounds like you already did it because if not half of them would not come over.  The files can probably not be found because they are third party and the files are not compatible with the transfer process.

Similar Messages

  • Why does my Mac give me a 'blocked  plug in' message when i try to open Castleville?

    Question
    Why doesn my Mac book Air send a 'blocked plug in' message when I open Castleville?

    Click on that message and follow the instructions.
    (81803)

  • HT1420 My iMac won't accept the password that I used to set it up and in not accepting my apple password so that I can reset the iMac password. How can I get into my iMac?

    How can I gei into my iMac to reset the password? It's not accepting my apple password  whereas my other computer is accepting my apple password and that's how I know my apple password is correct.

    Call Apple to help reset your Security Question.
    http://support.apple.com/kb/HT5699

  • Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

    Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

    This is a user to user forum.  Apple isn't here and won't answer you.  You need to contact Apple directly.  You can use the Contact button at the bottom of the screen.

  • Why does iPhoto not give me the option of ordering a medium size soft cover book?

    why does iPhoto not give me the option of ordering a medium size soft cover book?

    This is the iPod touch forum. There are two iPhoto forums, one for iOS iPhoto and the for OSX iPhoto. Try posting in the appropriate one

  • Why does my laptop give me a warning saying that firefox is using too much memory and to restart firefox to be more efficient? I just bought this laptop so I know it has the power to run what I need it to.

    Why does my laptop give me a warning saying that firefox is using too much memory and to restart firefox to be more efficient? I just bought this laptop so I know it has the power to run what I need it to.

    You appear to have AVG installed:
    *See --> http://forums.avg.com/ww-en/avg-forums?sec=thread&act=show&id=173969#post_173969
    From reading on the internet, it appears that when there is a spike in memory usage, AVG "interprets" that as a memory leak, possibly caused by malware. AVG could be incorrect concerning that assumption. Maybe they are being a bit too conservative about memory usage; just my opinion.
    The decision is yours to turn off the "advisor" or leave it on.
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • Why does my macbook give me the option to choose Macintosh HD or recovery HD at startup every time?

    Why does my macbook give me the option to choose Macintosh HD or recovery HD at startup every time?
    It never used to do that before until now.  How can I get it to just start up to the regular Macintosh HD again without clicking on the HD at startup?
    Im running a new macbook pro 13 inch with lion and everything is fully updated. 
    Thanks.

    Next time you boot, go here to make sure there is "something" selected:
    That's all I can think of...if nothing is selected in this box, strange things do happen

  • Why does my airport give wrong default gateway dhcp?

    I have a fancy AirPort Extreme Base Station running 7.7.3.
    It was recommended as a very good wireless access point, which it is, purely in terms of signal strength and connectivity.
    In terms of easy configuration, this thing is a nightmare. Someone once told me, "Get Apple products, they just WORK!" Not in this case. I am using the base station to provide access on my home network wirelessly and wired on the same layer 2. DHCP is assigning 192.168.1.250 as the default gateway, but the IP of the base station is 192.168.1.1, so none of my hosts on DHCP are able to get Internet. I cannot find or see a way to correct the DHCP gateway assignment.
    In addition, I have a single wired Windows host. It does not get the DHCP reservation I set up for it. I cannot for the life of me figure out why. MAC is right. ipconfig /release and /renew fails to assign the correct address every time tho.
    I have one Mac in the house. It too fails to obtain the right gateway IP. My question: why is the base station assigning 192.168.1.250 as a gateway when it's own internal IP is 192.168.1.1????
    I have owned many home access points. This is the first one I couldn't assign the internal IP to as a gateway address, and I can't assign a specific subnet mask to pair down the broadcast domain. Why are the options to configure my internal network so limited?

    LaPastenague wrote:
    Why are the options to configure my internal network so limited?
    So it will be easy to configure.
    Sadly this means there is no way to fix things when they go wrong.
    How did you manage to get 192.168.1.x .. as the default IP of the TC is 10.0.1.1 and it is well worth leaving it alone.
    Post a few screenshots and we can help you fix it up. Mostly.. probably.
    So the default is 10.0.1.1, but I didn't want an entire class A range wide open on my home network, so I chose the class C 192.168.X.X (why is Apple still doing classful networks?!?)
    Here's some helpful screenshots, starting with the opening screen.... note the router's IP:
    This is my AirPort's basic info, and the networks. There are two ethernet ports in back, one connected to the cable modem, the other to BADGER, my PC. BADGER will be the example in all my DHCP woes...:
    This is BADGER's manually assigned IP info. I would like to set up a reservation for it on the AirPort so I can just switch it to DHCP and be done.
    As you can see, my gateway is 192.168.1.1, which is the internal IP of the AirPort extreme. I use public DNS servers, so I add those manually on the PC. So, using this info, I create the reservation:
    Here you can see the DHCP scope I've assigned: .1.2-.1.50. I also set up a reservation for BADGER. No where on here is a way to specify the router's internal IP, which is 192.168.1.1 - it's the only gateway address that works.There's also no way to apply a more restrictive subnet mask to limit the number of hosts on my internal side, but that's another issue. Moving on...
    I apply the reservation. I click update. The AirPort extreme router updates itself. I switch BADGER to DHCP, and release/renew. Here's where it gets interesting:
    Here's what the router wants to assign me. The MAC address is the same as in the reservation, but the AirPort Extreme gives me 192.168.1.129? That's not even in the range I defined. Also, note the gateway address. It wants to assign 192.168.1.250 ... but that's wrong, as indicated by the lack of network connectivity in the system tray. If I configure my PC to use 192.168.1.1, then traffic routes off my home network just fine because that's the internal IP of the AirPort Extreme. So, without getting into this product's shortcomings as an actual configurable home router:
    - Why does it assign its gateway as 192.168.1.250 when it's really 192.168.1.1?
    - Why does it ignore my DHCP reservation and assign a completely out-of-scope IP?
    All of my devices are getting .250 as the gateway. Wireless and BADGER, even my lone Mac. Can anyone shed some light?

  • Why does my application give SerializationException although I have no serialized classes?

    I have created an application deployment tool for BizTalk, and it references and uses Microsoft.BizTalk.ExplorerOM apis to start, stop and manage a BizTalk application. Now when I run the tool, it gives following exception-
    Unhandled Exception: System.Runtime.Serialization.SerializationException: Type 'Microsoft.BizTalk.ExplorerOM.BtsCatalogExplorer' in Assembly 'Microsoft.BizTalk.ExplorerOM, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' is not marked as serializable.
    None of my classes are defined to be serializable. And the tool is created in WPF. Any idea how I might resolve this?

    Hi,
    I think the user has got this resolved at stackoverflow already.
    Why does my application give SerializationException although I have no serialized classes?
    Resolution: He was creating the instance of BtsCatalogExplorer through reflection, using connection
    string instead solves the issue.
    Rachit
    Please mark as answer or vote as helpful if my reply does

  • When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device

    When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device on the right hand side of itunes.

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • Why does it keep telling me that my account is locked when I am trying to buy the iphone 4s?

    Why does it keep telling me that my account is locked when I am trying to buy the iphone 4s?

    Why does what tell you that what account is locked? 
    The Apple Store says your itunes account is locked?
    Your carrier says your wireless account is locked?
    Your bank account?

  • Why does my camera roll say I am using 682 MB of storage but I only have 12 photos saved?

    Why does my camera roll say I am using 682 MB of storage but I only have 12 photos saved to it?

    If it's really a couple dozen pictures, I would expect it should be under 100 MB.
    You can try resetting your iPhone by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the used space is still so high.

  • I have purchased a song and my computer says it is unauthorized to play it.  I give authorization and it says its already authorized.  Then I try to play the song and it wont allow authorization.

    I have purchased a song and my computer says it is unauthorized to play it.  I give authorization and it says its already authorized.  Then I try to play the song and it wont allow authorization.

    Delete and redownload it if doing so is free in your country.
    (71678)

  • Why does my hard drive state I have used 500 gb when I have only used 280 gb?

    Why does my hard drive state I have used 500 gb when I have only used approximately 280 gb?

    Have you emptied your trash lately...
    Also... See these links...
    Apple ML = Increase Disc Space
    http://support.apple.com/kb/PH10677
    See Here  >  Where did my Disk Space go?
    And Here  >  The Storage Display

  • I'm trying to update the latest version of iTunes but my computer gives me an error saying to go to tools then download only and update manually. What do I do?

    I'm trying to update the latest version of iTunes but my computer gives me an error saying to go to tools then download only and update manually. What do I do?

    Try updating using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

Maybe you are looking for

  • Is it possible to resize the partitions without losing data?

    I have following issue: I have dual-boot Arch with Windows XP. I created 4 partitions: 40GB XP's system disk (ntfs), 80GB ntfs data disk, 1GB swap and 25GB Linux partition. But I am running XP so rarely, that it is frustrating, that I have most of my

  • Ibooks, ipad, itunes, ios 8 problem

    i, like most people, have their ebooks from various sources, B&N, ibook store, friends, etc....  Here is the problem i am fighting.  I will load a number of books on my iPad some from ibooks, some from B&N etc.  All the books will load on the ipad an

  • Oops ALV in background mode

    Hi Experts, I know this topic is discussed several times but I still have a confusion. I have created one ALV report using custom container like the usual way. As per my understanding this report shouldn't execute in background but when I execute the

  • Pricing procedure v/08 urgently

    hello, is this possible that we do not maintain account key but maintain accrual key as i just want that watever gl account i maintain in vkoa for accrual key the values should be posted in that only plz guide urgent issue

  • Can I move Mail (Lion) files back to Mail (Snow Leopard)?

    Hi, I've encountered a screwy problem and am wondering if there is an easy fix.  I have an iMac at the office that is now running Lion, and a MacBook Pro at home running Snow Leopard (which I am keeping there for now because of the Quicken issue with