TS2845 How to set airplay on ipad2 with tv via apple tv2

Hi i would like to understand how to use airplay for trasfering rented movie on Ipad 2 on to my television
Via appleTV 2?

Both need to be on the same network, you need to enable airplay on ATV (via settings). Then you tap the airplay icon on iPad, select ATV and it will stream.
See, for more info
http://support.apple.com/kb/HT4437?viewlocale=en_US&locale=en_US

Similar Messages

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

How to set up time capsule with BT Infinity

how to set up time capsule with BT Infinity

The easiest and sure way is to use bridge on the TC as the method of connection. The TC then becomes a device in your network and gets its IP from the main router that I presume BT supply.
Method is,
1. Plug the TC WAN port into the BT supplied modem by ethernet.
2. Plug the computer you are using for the setup into the TC by ethernet.
3. Run the airport utility .. go to internet tab on the top menu..
In the bottom option, Connection Sharing choose off (bridged mode)
4. Go to the wireless page and setup wireless connection as you like it.. using whichever band you want. And make sure security is set to the highest setting, wpa2 personal. Put in a decent wireless passkey.
5. Press the update and fix whatever else the TC will show as needing fixing.. usually security stuff.
6. You can then disconnect the ethernet and connect by wireless if you want. Any port on the TC will now be a LAN port, including WAN.
This is assuming BT supply a wireless router with built in vdsl/other type of modem. If so you normally will not be able to bridge the modem, unless BT are using pppoe authentication which they haven't in the past.
If you really need to use the TC as a router then you will need to work out an alternative method. You can double NAT by placing the TC in the DMZ of the BT router if that is an option. It is not without issues in general.

How to set the screen size with nested Iview screen

Can someone show me how to set the screen size with nested IView screen.
at the moment i only try it with trial and error untill it looks somewhat close. Is there a property in VC to set the size for Height and width.
The same question is for the form. the form elements inside the form is easy but the actual form is still a challenge.

Hi,
Yes you are correct ,Still the Form and iview are not able to change thier Layout Structure using a Propery.
it is available with VC7.1
Govindu

Could anyone please let me know how to set a ICC profile with Acrobat dlls using Csharp or VB

Could anyone please let me know how to set a ICC profile with Acrobat dlls using Csharp or VB

Cant we even use the dlls in an application?
In order to automate Acrobat, you need to have Acrobat installed. There is
nothing you can do with just the DLLs. As was already stated, Acrobat is
not licensed for use on a server, but regardless of that, it's also
not technically suitable for server use. You need to find a solution
outside of Acrobat to solve your problem.
It also seems that you don't have a good understanding of what is going in
inside a PDF file. PDF is a very complex file format, and based on
your questions
and followup questions, you need to spend a considerable amount of time
getting familiar with the PDF file format to understand how color works in
the PDF context. Reader the PDF spec, while paying special attention to the
section about color. You will find out that if you want to convert the
color space of a "PDF file", you actually need to convert the color space
associated with every single object in your PDF file. That is fairly simple
for vector graphic and text, but when it comes to images, you may have to
convert the image data. Once you have a good understanding of what it is
you need to do within the PDF file, then you can start looking for tools
that allow you to do that. Again, Acrobat and therefore the Acrobat SDK is
not suitable for this task. If you want to stay with Adobe products take a
serious look at the PDF Library, which his licensed through Datalogics (
http://www.datalogics.com/products/pdf/pdflibrary/). As you've mentioned,
there are other, non-Adobe PDF libraries that you can also use, but this is
the Acrobat SDK forum, so I won't discuss any of those 3rd party solutions.
You are wasting your time while looking for a simple solution that does not
exist.

How to set APN in Iphone5 with IOS7 updated, How to set APN in Iphone5 with IOS7 updated

Could anybody please help me how to set APN in Iphone5 with IOS7? I do not find APN in setting under cellular.
Please help me.....

I presume that would be a passcode to the Restrictions. You'll need to restore the iPhone to factory settings. If the customer set up Find My iPhone and hence Activation Lock, you'll need the customer's Apple ID and password, or you'll need to get them to erase it via iCloud:
http://support.apple.com/kb/PH13695
Regards.

If user disable cookie how to set and use session with URL Rewritting

if user disable cookie how to set and use session with URL Rewritting by append session ID in url

If cookies are disabled, then app server will automatically try to use URL rewriting for session control. Programmer's responsibility is to encode any links or redirects using
response.encodeURL("/yourPage.jsp")
and
response.encodeRedirectURL("/yourPage.jsp")
See API for details
http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/http/HttpServletResponse.html#encodeURL(java.lang.String))

How to share contacts from ipad2 with older iMac running 10.6.2?

How to share contacts from ipad2 with older iMac running 10.6.2?

Well I guess I was too optimistic. Since last posting I have had three hang events, one during reboot. When the login dialog box came up I clicked on it and it hung.
However I do have a new data point. I have enabled the remote login (sshd). I have discovered that when the system hangs like I described above, I can still log in via SSH from my Windows system. The shell appears normal, but when I tried a "killall Safari" command the OS crashed hard. After a hard reset, the system hung during the login process. Again I could login remotely, and that time I executed a "sudo reboot" via the remote session. That cleared the display to all-blue but did not successfully reboot.
Can anyone suggest what to try via the remote login to help diagnose what is happening? I am familiar with typical Linux architecture but the differences in Mac OS X are leaving me a bit disoriented.

How do I connect my ipad2 with my hp photosmart c4780 printer?

How do I connect my ipad2 with my HP photo smart C4780 printer?

Sharon-
I don't think that printer is capable of AirPrint. If the printer has WiFi or can be connected to WiFi, you can use an iPad App like Print n Share. If not, you can use a computer program like Printopia to share the printer as AirPrint over WiFi.
Take a look at the free iPad App, HP iPrint Photo. It has some limitations but should at least get you printing.
Fred

How to set up airport extreme with TPG ADSL2 ?

How to set up airport extreme with TPG ADSL2 ?

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

How to set all new vm with VLAN ID as a default settings and alose set the avaiablity high .

How to set all new vm with VLAN ID as a default settings and alose set the avaiablity high .

Hi Ramy,
As a work around , you can create a VM without installing OS and configure the Vlan of VNic , then export it .
The new VM will be with Vlan ID when you import the "export file".(note : you need to select "copy the virtual machine " in the tab "choose import type" during importing ) .
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How can I get my ipad2 with os5 to Kodak wireless printer esp9.

How can I get my ipad2 with os5 to Kodak wireless printer esp9.

Airprint won't work with the Kodak printers because Kodak does not support Airprint. You'll need to check in the App store to see if Kodak makes a printing app for the iPad. Otherwise, there are a number of third party printing apps. People have used Printopia, Print n Share, and Print Central with good results.

I just upgraded to garageband 10.0.2 and I don't know how to set up a mic for recording via USB

I just upgraded to garageband 10.0.2 and I don't know how to set up a mic for recording via USB

Connect your USB mic or USB Audio Interface to an USB port.
Create an new Audio Track from the Tracks menu > New Track.
Select "Audio > Record using a microphone ...."
Click "Details" to reveal the Input sources.
Click "My instrument is connected with..." to open the GarageBand Preferences "Audio" tab and select your microphone as Input device.
In the Track menu > Track Header enable "Show Record enable" button.
Enable this button for your vocal track.
Open the Library pane to select a vocal patch your new track.

How do I use Home Sharing with two different apple accounts?

How do I use Home Sharing with two different apple accounts?

Morning Saintine,
Thanks for using Apple Support Communities.
Home Sharing enables you to stream or transfer music, movies, TV shows, apps, and more among up to five authorized computers in your household. To do so, you will need to Turn on Home Sharing on each computer using the same Apple ID.
Understanding Home Sharing
http://support.apple.com/kb/HT3819
Hope this helps,
Mario

How can i format an iphone with an differant apple id ?... the phone is locked and it needs the original apple id to activate it which i dont have

how can i format an iphone with an differant apple id ?... the phone is locked and it needs the original apple id to activate it which i dont have .... help me

Moh'd . Hassan wrote:
how can i format an iphone with an differant apple id ?... the phone is locked and it needs the original apple id to activate it which i dont have .... help me
Then get the previous owner to remove it: Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support

TS2845 How to set airplay on ipad2 with tv via apple tv2

Similar Messages

Maybe you are looking for