TS2932 problems with aperture 3.4.3 adjustments not working on latest photos upload to iPhoto library
I recently uploaded some raw photos taken with a nikon D40x to my iPhoto library. Did some cropping and adjustments in iPhoto. Next I opened that library and that project in Aperture, and tried to do some furter adjusting. Pictures became distorted. At first they looked liked fine but as soon as I tried to do adjustments the pictures darkened, had less definition and looked hazy. I tried to reprocess with no success.
I then performed the apple check on my photot using the > filter feature > add rule > "filter type" is "raw", > adjustments "do not include" "raw decode version 3". The only photos in my entire iPhoto library that do not meet those criteria are the new pictures in question. I do not know what to do.
Not sure of the meaning, but you should launch Aperture while holding down alt/cmd. Use the repair options starting at the top and checking Aperture after each one.
Similar Messages
-
There is a problem with my apple watch.it is not working well .There is a problem in its charging .The repairers says that contact to your company and ask them to provide you its software.
Please help me.Please be aware that you are not communicating with Apple when you post in these forums. These are user-to-user support forums, so in almost all cases the only people who will reply to your posts are, like me, your fellow users.
As to your issue, Apple does not and never has made a wristwatch as such. The only thing close to a watch that they have made was the 6th-generation iPod nano:
http://support.apple.com/kb/ht1353#iPod_Nano_6G
which has a clock feature and which some people have worn as a wristwatch. Is that what you mean?
Message was edited by: varjak paw -
vine.co can not watch videos on other browsers do not have the problem with firefox firefox there just did not work, delete cookies, history
I think this problem may be caused by Yahoo's changes making it incompatible with the klatest version of FireFox.
This is suddenly affecting many many people who use Firefox and are members of Yahoo Groups. All these people say they themselves changed nothing and have not been locked out before when using Firefox. But suddenly, within the last week, they are.
What did Mozilla do or what did Yahoo do to cause this problem? I can say that I was not blocking cookies and after trying a number of things to fix it, I went to Yahoo's home page and navigated to my group from here.
This problem is not anything a user did. Either Firefox is at fault or Yahoo is. I want to know which company is at fault and when they are going to fix it. -
I just installed Aperture 3 from a CD. i also imported my photos from my Iphoto library. After importing most of the photos imported are blurry and it tells me the program is "processing" and it never stops. What do I do?
I just installed Aperture 3 from a CD. i also imported my photos from my Iphoto library. After importing most of the photos imported are blurry and it tells me the program is "processing" and it never stops. What do I do?
-
I'm having serious problems with Lightroom plug in for Facebook not working on my iMac. Help!
It started about a month ago with LR4. I kept getting problems with not being able to publish to Facebook because of problems with the plug-in which had been working perfectly up to then. I had a run round that worked by disableing and reloading the plug in. I upgraded to LR5 but the problem persisted and in fact just became worse. I can no longer publish to facebook from LR. I deleted the LR app in facebook as someone advised but now I cannot re-authorise with Facebook. When I go to the "connect" buton nothing happens. This is a serious problem that may make me reluctantly abandon Lightroom if I cannot find a solution. Can anybody help?
According to the Lightroom Facebook page, Facebook broke it and Facebook has to fix it- there is no ETA.
You can read several posts here (with Adobe responses as well) https://www.facebook.com/lightroom?fref=ts&filter=2 -
Problem with GenericCatalogDAO JDBC Resultset using parameters not working
Hello
I have a problem with Petstore GenericCatalogDAO. java. The problem is the behaviour of the resultset object when retrieving data from the database.Below are two synareos one that
works (when) hard coded and one that does not work when parameter values passed into the the result set.
1. The code the WORKS.
statement = connection.prepareStatement("select a.productid , name, descn from product a, product_details b
where a.productid = b.productid and locale= 'en_US' and a.catid = 'FISH' order by name"
,ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_READ_ONLY);
resultSet = statement.executeQuery();
resultSet.absolute(1);
String s = resultSet.getString(1);
The code that gives me a 'exhausted resultset' error which I think means no results
String[] parameterValues = new String[] { locale.toString(), categoryID };(For example parameters are 'en_US' and 'FISH')
statement = connection.prepareStatement("select a.productid , name, descn from product a, product_details b
where a.productid = b.productid and locale=? and a.catid =? order by name"
,ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_READ_ONLY);
for (int i = 0; i < parameterValues.length; i++) {
statement.setString(i + 1, parameterValues[i]);
resultSet = statement.executeQuery();
resultSet.absolute(1);
String s = resultSet.getString(1);
There is obviously a problem using these named parametevalues with these preparedstatement resultset, Does anybody know anything about this and a fix for it????
Cheers. RogerWhich version of PetStore are you using?
-Larry -
Mensagem editada por: Mauricio Galletti
It seens that there´s some problem with the specific date of 19/10/2014? Don´t know why? I just remove this date from the interval and the problem gone.
What´s wrong with 19/10/2014?Hello Galdr,
Welcome to the HP Forums.
I see that after doing some updates, you've lost the use of switchable graphics in your Notebook. I will do my best to help you with this.
You can try is to use the HP Recovery Manager. This will allow you to "recover" the Notebook and reinstall the original drivers. This document: Using Recovery Manager to Restore Software and Drivers (Windows 7), can assist you with that.
Once the drivers are "reverted", then if you wish you can attempt updating.
This first thing I will provide you in regards to updating is this document: Switchable Graphics on Notebooks Configured with Dual AMD GPUs. There is more general information than anything, but you may find it useful.
When going to update you will want to use the website or the HP Support Assistant. These are the recommend ways to update. When using AMD's (or other OEM utilities) they will look for compatible drivers for the component, but not necessarily ones that work with your Notebook. What most likely happened, only one of the two drivers were actually updated.
Here is a link to the newest driver provided by HP: AMD High-Definition (HD) Graphics Driver. Also, here's a link to using the HP Support Assistant: Using HP Support Assistant (Windows 7). (in case you wanted to learn more/use this method).
I hope this is able to help you get back to "state 1", so that you may be able to update correctly and have full functionality of your switchable graphics again. Please let me know how this goes for you. Thank you for posting on the HP Forums.
I worked on behalf of HP. -
Hi Guys
I recently bought a second hand early 2011 Macbook Pro 15 inch and are having 2 problems. The first is that none of the apps detects my webcam at all, the second is, i have Windows 8 installed on bootcamp but are unable to get the keyboard backlight to work in 7 or 8. The backlight works perfect in os x 10.8.5 though. I need a little bit of help guys.....Go to Apple Menu / About This Mac. Click on More Info ... next on System Report. In the left hand column, under Hardware, select USB. The right side will show the USB Device Tree. Look through that and check for "Built-in iSight". That is your camera. If it is not listed the camera is not working.
For backlighting, try this: go to System Preferences / Keyboard. Uncheck "Adjust keyboard lighting in low light". -
I have a problem with my Iphone 5 all sounds not working
sounds not working at all with my iphone 5.
Hi Ali147,
Welcome to the Support Communities!
The following article will provide some troubleshooting steps for this issue:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Hope this helps ....
Judy -
How can I get Skype microphone settings to work with new iOS 7? Also the video no longer works,...any suggestions?
Only for the sound:
settings > privacy > sound -
Problem with join / explicit field declaration does not work
Hello together,
there is something I do not understand about the join. I have a join over two tables (see below). The field AENAM exists in both tables but I want to have it coming from ZDPP_VERBRAUCEFF.
BUT the system gives me the values from MARA although I define the source ZDPP_VERBRAUCEFF.
SELECT zdpp_verbrauceff~mandt
zdpp_verbrauceff~matnr
zdpp_verbrauceff~zzmdv01
zdpp_verbrauceff~begda
zdpp_verbrauceff~endda
zdpp_verbrauceff~vmeng
zdpp_verbrauceff~vmeng_m
zdpp_verbrauceff~aenam "Problem
zdpp_verbrauceff~aedat
zdpp_verbrauceff~aezet
zdpp_verbrauceff~prfdt
zdpp_verbrauceff~prfzt
FROM zdpp_verbrauceff
INNER JOIN mara
ON zdpp_verbrauceffmatnr = maramatnr
INTO TABLE lt_ver_db
WHERE zdpp_verbrauceff~zzmdv01 IN s_mdv01
AND zdpp_verbrauceff~begda <= s_datum-high
AND zdpp_verbrauceff~endda >= s_datum-low
AND mara~mtart IN s_mtart
AND mara~matnr IN s_matnr.
Can anybody tell me what I doing wrong?
Thanks in advance,
SebastianCan you try change the statment sequence as I have below and see if this works i.e:
SELECT zdpp_verbrauceff~mandt
zdpp_verbrauceff~matnr
zdpp_verbrauceff~zzmdv01
zdpp_verbrauceff~begda
zdpp_verbrauceff~endda
zdpp_verbrauceff~vmeng
zdpp_verbrauceff~vmeng_m
zdpp_verbrauceff~aenam "Problem
zdpp_verbrauceff~aedat
zdpp_verbrauceff~aezet
zdpp_verbrauceff~prfdt
zdpp_verbrauceff~prfzt
FROM zdpp_verbrauceff
INTO TABLE lt_ver_db "LINE MOVED to here
INNER JOIN mara
ON zdpp_verbrauceffmatnr = maramatnr
WHERE zdpp_verbrauceff~zzmdv01 IN s_mdv01
AND zdpp_verbrauceff~begda <= s_datum-high
AND zdpp_verbrauceff~endda >= s_datum-low
AND mara~mtart IN s_mtart
AND mara~matnr IN s_matnr.
Regards,
Warren. -
Transport request problem with an include prog ... not working
Hello people I am in a predicament here. I have this SAP Enhancment program with a screen and include code
<b>screen:
SAPLITO01080_XUSR1080_SAPLXTOB1000
include:
ZXTOBI01</b>
right now it can be found either in the function grp XTOB or a project made by us (can be found in CMOD).
When I released the Transport Request with both of the above included. The screen SAPLITO01080_XUSR1080_SAPLXTOB1000 was sent to the prd server but the include code ZXTOBI01 didnt. I tried saving and creating a transport while editing it in XTOB and my project (ZPMTECH), and it still wont work. If any of you can give me some help regaring this I would be ever greatful. Thanks guys and take care.<b>"Try to see the code of your user exit in PROD, it seems the statament INCLUDE ZX...... is missing."</b>
This is in DEV: In the SAP Enhancments ZPMTECH, the thing is here is that my enhancment comes from a screen. So I just add modules and click on the module and created an enhancment. the include code cannot be seen in ZPMTECH but it can be seen in the function XTOB. However in PRD XTOB does not have the include program nor the modules, but has the screen.
<b>"In your request there should be only the include, not function (user-exit)."</b>
That is how I have transporting it, still doesnt work unfortunatley.
Thanks. -
Problems with Godaddy email webmail WBE plugin not working w/ FF
While the basic email is working the plugin WBE fails to work properly
Please get back to me ASAP on fixing this. Prior to the last two updates to FF Fire Fox worked just fine
The WBE plugin does work with IE but '''not with Fire Fox 3.6.12?'''Again IE8 works fine now but Firefox does not allow me to embed jpegs or png files like it used to in my webmail.
The URL:
http://email00.secureserver.net/pcompose.php
See the uploaded image so you can see what happens when I paste.
I get a broken image picture in the upper left corner
While the picture and the tag seems fine the picture fails to render in FireFox. Any idea why
Here is the source:
<img src="file:///C:/Users/Robert/AppData/Local/Temp/MYFILE.PNG" width="826" border="0" height="665">
This used to be added as an ebedded file but clearly its being added as a linked file? How do I fix that??? -
Anybodys phone is doing the same? It started today. I'd really hate to restore. Any thoughts thanks
Tried to reset network settings however it is still same. Added another gmail account and somehow it is working :S. Checked account settings on gmail and iphone. Settings are correct and imap is enabled. When I tried to check my e-mail it says "username and password don't correct"
Tried to delete account and add again but no change.
I am not sure what is the problem. -
just bought a MacBook Air and using Numbers to make a spreadsheet for financial purposes. The sum function is working ok for whole numbers but when I try to sum a column of 2 decimal place numbers the result always comes back as 0. Can anyone help?
Hi laura,
I suspect that your 2 decimal place numbers are formatted as text. Change the format of the column to currency and see it that works.
Also You might want to update your profile to reflect your current systems!
quinn
Maybe you are looking for
-
Yesterday my mouse was going all wacky on me, I had to double click everything, buttons not working, and anything I touched stuck to the cursor. It was as if the the first click was just mouse down and I had to click again to release. Input with the
-
?
-
Question Lost my iCloud password on my iPad1. How can I restore it ?
-
Don't know username and password
Hi, a little odd. I install oracle 9i on my computer. Everything went well, but I do not remember the universal installer asking me to enter username and password. Now I am trying to run SQLPlus but I cannot connect because I don't have any user name
-
Error " No Adminsitrator found for the Task"
Hi Experts, I got this messege when I clicked on an item in Business Workplace - Inbox - workflow- Grouped According to Task - Active Idoc Monitering. The Standard Task I am using is TS 74508518. I hav maintained in Agent Assign