TS2972 apple tv and mac were synced last week, now not so much

Apple TV won't sync with my mac. it was working last weekend and I have checked all connections and login info. Any suggestions?

I've seen quite a few similar issues posted on this forum, in most but not all cases, restarting the tv has resolved the issue. Have you tried doing this ?

Similar Messages

  • I have been using iCloud since it came out to coordinate my schedules from my phone, ipad and Mac laptop.  Last week they stopped synching...I can't upgrade b/c of memory. Could this cause the problem?

    I have been using iCloud since it came out to coordinate my schedules from my phone, ipad and Mac laptop.  Last week they stopped synching...I can't upgrade past OS 5.1.1. b/c of memory (1st generation iPad and iPhone 4s). Could this cause the problem after the release of the new OS?

    Welcome to the Apple Community.
    First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
    Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
    If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

  • We have two iPads. mine is the first one purchased. I opened iTunes to put some photos from the Mac to my wife's iPad. I plugged in my wife's iPad.  Both ipads have the same apple id and password. iTunes synced everything from my iPad to my wife's iPad. N

    We have two iPads. mine is the first one purchased. I opened iTunes to put some photos from the Mac to my wife's iPad. I plugged in my wife's iPad.  Both ipads have the same apple id and password. iTunes synced everything from my iPad to my wife's iPad. Now we have two identical iPads looking like mine. Everything on her ipad seems gone and replaced with mine, all her recent holiday photos, emails, settings, etc etc seem gone. 
    I'm toast!
    Help!!
    LJ

    How to use multiple iPods, iPads, or iPhones with one computer
    http://support.apple.com/kb/HT1495
    How to Share a Family iPad
    http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
    Using iPhone, iPad, or iPod with multiple computers
    http://support.apple.com/kb/ht1202
    iOS & iCloud Tips: Sharing an Apple ID With Your Family
    http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
    How To Best Use and Share Apple IDs across iPhones, iPads and iPods
    http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
     Cheers, Tom

  • I had an Apple account on my old Lap Top to which my iPad  and iPhone were syncd. I now have a new Lap Top and when I tried to access my apple ID on it I was asked to sign up for a new account. I can't use any of them.

    I need help. I had an apple account on my old Lap Top to which my iPad and iPhone were synced ?  I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did. After doing this I  tried to sync my iPad and phone to the new lap top which I was unable to do as they didn't recognise my new ID. HELP!!!!!! 

    cathorio wrote:
    I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
    I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
    Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
    I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

  • Hi...m using a mac pro quad core.....its not booting up...i can only  see the apple logo and a circle loading...could not get into the login screen

    hi...m using a mac pro quad core.....its not booting up...i can only  see the apple logo and a circle loading...could not get into the login screen...any suggestions please.....m in the middle of a project and now i have got this one
    regards,
    v.s.bharan

    Welcome to Apple Discussions!
    Do you keep your data backed up?
    If not, you should always do so*:
    http://www.macmaps.com/backup.html
    You never know when a hard drive or a directory might go bad.  Having a bootable clone is a must.
    That link also shows you some tools you can use to recover data.
    If you aren't backed up, try buying those tools first, before attempting to repair the directory.
    Directory issues can be fixed with these tools*:
    http://www.macmaps.com/directoryfaq.html

  • My ipad is disabled and I updated it, then the apple id and password were required I entered it but the itunes says this email cannot be used to unlock this ipad. So what can I do?  anybody help me please.

    My ipad is disabled and I updated it, then the apple id and password were required I entered it but the itunes says this email cannot be used to unlock this ipad. So what can I do?  anybody help me please.

    is it the ipad that is disable or your Apple ID?
    This article contains instructions on what to do if have forgotten your passcode or  your device is disabled:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Contacting apple id support
    http://www.apple.com/support/appleid/contact/

  • Apple id lost. Cannot get access to it. Started with a mail from apple id saying that apple id and password were changed. Did not sent such a request. Cannot get a new apple id as the mail adress already has been used one time. Pls help

    Apple id lost. Cannot get Access to it. Started with a mail from apple id saying that apple id and password were changed. Did not sent such a request myself. Since then no acces to apple id, not even via forgot my id site. It says that my apple id and birth date details do not match. Something is obviosly totally wrong. Got a visa card recently, is that the reason? Cannot get a new apple id with my real address as the systems says its already used. Pls help, I am vey frustated that this can happen.
    Best regards
    Laus Lausen

    Call Apple account security via the telephone for your country
    http://support.apple.com/kb/HE57

  • My iphone will not show as my iphone anymore it just shows up in itunes as apple iphone and i cannot sync anything to it

    my iphone will no longer register as a my iphone on my itunes account it just shows up as apple iphone and i cannot sync anything to it, im using the latest version of windows computer

    Device not detected in iTunes for Windows

  • My iphone 3g got stuck with the apple logo and loading bar since  last night when i try to reset the iphone pls help thanks!

    My iphone 3g got stuck with the apple logo and loading bar since  last night when i try to reset the iphone pls help thanks!

    Can you reset the phone by holding the on/off switch and home button down until your phone reboots and the Apple logo again displays?

  • My iphone 4 is locked on a black screen with apple symbol and loading sign since last night, how do i fix this?

    my iphone 4 is locked on black screen with apple symbol and loading symbol since last night

    You need to restore the iOS using iTunes. Place the device into Recovery Mode and Restore the device
    Read here for instruction > http://support.apple.com/kb/HT1808

  • HT1349 i upgraded to yosemite last week, now my computer wont start. it stops at white screen with apple logo. what do i do?

    i upgraded to yosemite last week, now my computer wont start. it stops at white screen with apple logo. what do i do?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • Bought a New Mac Book Pro last week, can I get a free upgrade to Lion?

    To cut a long story short, I bought a new Mac Book Pro Last week, it is only 6 days old now, it was nearly 2 grand and comes with Snow Leopard, today on their website I saw Lion OS Advertised as 'coming soon to a mac near you' or something. I was just wondering, as I've just spent nearly 2 grand on a Mac Book last week, would I be eligible for a free upgrade to Lion when it comes out?
    I think you should be as when I bought it i was never informed there was a new OS coming out soon, does anyone know the answer? Or how much it may be to upgrade? as after spending £1899 I don't want to have to pay £100+ to upgrade a month later or so.
    Kind Regards,
    Chris

    Lion won't be out until middle of next year, so you are not entitled to any upgrade. But you may be entitled to the iLife '11 software if it isn't already installed. Check the Apple website for any Up to Date offer.
    +No merchandiser is required to inform you of a new product not yet available. If you think they are then you are poorly informed.+

  • Advice on how to access photos on an iPad that were synced from a now failed laptop? The question stems from a need to return my current iPad having just taken delivery of a new unit. Thanks

    I am after some advice on how to access photos on an iPad that were synced from a now failed laptop? The question stems from a need to return my current iPad having just taken delivery of a new unit. Thanks

    If you have a dropbox account, there's a free app (probably more) that syncs photos to your dropbox account - picbox. 
    There's also PhotoSync that syncs photos to/from a number of different services and devices.

  • HT4623 I accidently disconnected to cord in the middle of updating software on my iphone4. it now has apple logo and blank loading line below. it will not do anything else. can't even switch off please help

    I accidently disconnected to cord in the middle of updating software on my iphone4. it now has apple logo and blank loading line below. it will not do anything else. can't even switch off please help

    Connect the iPhone to the compter you usually sync with
    and use iTunes on that computer to do the restore.

  • Lightroom 5.6 When I try to publish the photos from Lightroom to SmugMug I get an error Canceling task at the top left side and the photos are not published. I have published photos before just last week so not sure whats going on. Any help would be great

    Lightroom 5.6 When I try to publish the photos from Lightroom to SmugMug I get an error Canceling task at the top left side and the photos are not published. I have published photos before just last week so not sure whats going on. Any help would be great.

    See my first post in this topic:
    https://discussions.apple.com/message/21371126#21371126
    Trashing the preference file may help, as I've outlined in the topic I've linked to. Otherwise, follow the steps regarding removing 3rd party QuickTime components. Also, see the final post by the OP (EEye87) regarding how his problem was resolved (a combination of trashing the preference file and the 3ivx component).
    John

Maybe you are looking for

  • Data values on 3D graph

    Hi i am able to show data values on all graphs but how to show same on 3D graph in RTF format... as i have already tried same code in Alt Text tab of 3D chart graph but it is not showing up the data values.... Help me to how can i show data values on

  • Zen Micro w/ firmware 1.x and Media Player 10. Get sync

    Hi?I've discovered what was my PC USB 2.0 problems!!! The voltage on mother boart too high! (2.72 instead of the lowest 2.6)!!! That caused USB 2.0 bridge don't working !!! Anyway. Started with the ZM right connected to the front USB 2.0 port I've st

  • Problems with Metadata Integrator noClassDefFoundError

    Hi, we have installed Business Obejcts on three different hosts. 1. Host: SQL Server 2008 for the repositories 2. Host: Business Objects Enterprise XI 3.1 SP3 3. Host: Data Services 3.2 incl. Metadata Integrator + Job Server + Access Server If I try

  • ASO Oultine

    Hi all,<BR><BR>I am planning to build a ASO cube. I have a dimension which I plan to it as Lable Only. There are 2 children to that and I want them to have ~ as consolidation property. Is it possible? <BR><BR>Also what is the difference between store

  • Please help me to close unwanted processes that ar...

    hi! I recently downloaded a cricket game called 'cricket T20 championship 2010'. But some times when I open it, it gives me a message which says something like it faces unhandled problem so application should be terminated. Same problem happens somet