TS2972 iTunes sharing features issues only with my newest desktop

Hi, hope someone will find an idea about my strange issue
I migrated my iTunes Library on my more recent desktop (OS Windows7 64 Ultimate)
I still have an old desktop (Windows XP Pro 32) and a laptop (Windows Home Premium 64)
My 2 desktops are plugged with CPL (and a switch)
My laptop is either wifi or direct lan to my routeur switch
All of them are authorised in iTunes.
My iTunes Libs from old desktop and laptop are always seen between my iOS devices, my laptop, my old desktop
My main iTunes lib migrated to my most recent desktop is either seen and shared by all my devices, pc
OR... on this desktop it becomes impossible to share or to see other shared library (both shared libs and home shared libs)
it happens when iTunes starts. From the beginning, if sharing works, it works all the time.
If sharing doesn't work, I found a way to make it come back temporarily :
- with iTunes still opened, I activate another network card (for instance my wifi receiver which is disabled by default)
- I close iTunes
- I desactivate my main network card (it's a Realtek from my mainboard)
- I cross fingers
- I restart iTunes
in most cases all my shared libs / homesharing come back. I can see shared stuff from other pc, and i can share to all my network. Then, I activate my Realtek network card and I desactivate the wifi one. Sharing still works.... Until another time when i start iTunes and there is no more sharing features.
Last clue : when i use an app like remote linked to my lib, then I close itunes, then restart, and in the case sharing seems to not work after that, sometimes remote is able to work whereas the library is not broadcasted on my network ... in appearance !
Any idea ? any similar cases ?

Figured out my problem sharing my music library on a new iPad Mini (I think).  Two issues:  (1) I have two Apple IDs, the result of doing one years ago and forgetting about it when I set up another; Apple doesn't seem to be able to ever merge or otherwise fix this problem, despite the best efforts of smart folks at the Genius Bar plus of course I'm forced to have 3rd ID as my iCloud username, but never mind....).  I was logged in as one Apple ID and my music library is under the other.  Went to "Music" under settings, signed out under "Home Sharing" on that page, signed in again as the other Apple ID.  (2) Realized then that it was trying to share music from something called my iPad library instead of the library under my name, which is where my music is.  When I fixed these two things, it all shared nicely.  Whew!

Similar Messages

  • HT1923 how do i sync itunes to my ipod classic with the newest version of itunes?

    how do i sync itunes to my ipod classic with the newest version of itunes?

    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar.
    To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing and follow the instructions.

  • ITunes Sharing Libraries Issue

    I have been having a serious issue sharing my main computers iTunes library over my network and have exhausted my limited networking/computer knowledge trying to fix it. Any help would be greatly appreciated.
    *My Setup:*
    My music is stored on an EHDD that is connected to a PC Desktop. I have 2 laptops and an iPhone (use as remote) that I want to share the library with. The laptops are an HP and a Macbook.
    *The Issue:*
    I have set all iTunes on all computers up to share libraries. I have named them all the computers (work laptop, macbook, desktop). All libraries show up on all other computers shared drives in iTunes. However, the sharing works bidirectionally between the HP laptop and Macbook, but nothing works bidirectionally with the Desktop. The Desktop PC can read the music on the laptops and play the songs, but the laptops can not connect to the Desktop PC.
    Secondly, this bodes true for my iPhone's remote app. It is recognized by all computers, but only works with the laptops.
    I get an error message when trying to connect any device/laptop to the PC Desktop. It seems like something is blocking the intrusion.
    *My Troubleshooting:*
    I have uninstalled and reinstalled iTunes once.
    I have reinstalled Bonjour only as well.
    I have forward the port 3689 (or whichever it is) on my router.
    I have disabled my firewalls.
    I have even connected the Desktop PC wirelessly to the network to make sure that the router isn't the issue and it didn't work.
    To no avail, I still can't connect to the Desktop PC iTunes library where all of my music is stored. It's driving me insane!! Please help me if you can.

    When I set up my home network for sharing, for some reason even though I had Windows sharing and Mac sharing all comfigured correctly, I couldn't get iTunes sharing to work everywhere until I disabled the Windows firewall on my Xp desktop and XP laptop.
    Then once itunes sharing was OK, I re-enabled Windows firewall on both XP machines, and itunes sharing still worked.

  • Keyboard layout issue only with Windows 7, not Windows 8

    Hello,
    I have a strange behaviour with Remote Desktop on Windows 7. I have a RDS 2012R2 deployment, with TS Gateways, broker and remote desktop collection. I have published a RemoteApp.
    My issue is with the keyboard layout send by the client. My server is in English - Swiss French keyboard.
    With my Windows 8 client, keyboard in "French", the keyboard used in my RemoteApp is correctly set to "French"
    With my Windows 7 client, keyboard in "French", the keyboard used in my RemoteApp is set to "Swiss - French". This is not the correct layout.
    Why under Windows 7 the keyboard layout is not send correctly ? 

    Hi Sebastien,
    Initially please use latest RDP version 8.1 for windows 7 and check the result. 
    If you want the session to use the default keyboard layout stored in the user profile instead of the layout provided by the Remote desktop Server client after the user logs on to the Remote desktop Server computer, you can set the IgnoreRemoteKeyboardLayout
    registry value to 1. After users first connect to the Remote desktop Server computer, configure the default keyboard layout and input language that you want, and then log off. All later user logons will use the default keyboard layout and input language from
    the profile.
    To do so, please perform the following steps: 
    1. On the remote desktop server, click Start, click Run, type regedit, and then click OK.
    2. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout
    3. On the Edit menu, click Add Value, and then add the following registry information:
     Value name: IgnoreRemoteKeyboardLayout
    Data type: REG_DWORD
    Value data: 1
    4. Quit Registry Editor.
    After you first connect to the Remote desktop Server computer, configure the default keyboard layout and input language that you want, and then log off. All later user logons will use the default keyboard layout and input language from the profile.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Windows (SMB) Sharing Troubles, but only with Groups

    I have a NFS3 share on a Linux machine that I mounted to my OSX Server. The drive is shared and the Everyone, and User privileges work, I can change them and control the access. Group privileges seem to be broken. I can verify on the Linux machine that the proper group ID has been set on the files, but my WindowsXP machine's don't think they are part of the group I guess.
    How can I start to debug this?
    My OSX Server is running 10.4.8, and is a Samba PDC using Open Directory.
    Any help would be greatly appreciated.

    In order to get this problem fixed you need to have "Enable Access Control List on this volume" (ACL) checked in the "Workgroup Manager".
    POSIX only seem to support "Everybody" and "Users" access. While the Group data is intact, Windows XP doesn't respect it. With ACL on the groups magically work.
    I have started another thread here to cover the NFS issue.
    http://discussions.apple.com/thread.jspa?threadID=776331
    -Hays

  • EeePC- SDHC Issues only with Arch

    To begin with I have a Eeepc 701 4G and a A-DATA 16GB SDHC Turbo Eee PC Edition card. Whenever I try to install Arch via a usb drive, I get a error on boot that says something along the lines of I/O error with my SDHC card which is listed as /dev/sdc1. Normally I would think this is a defective card or its going bad but Arch is the only distro that gives me this error.  The error is just in the text that scrolls by but it also hangs when trying to partition the SDHC drive To test it out I have installed Mandriva 2008.1 Spring, Ubuntu 7.10/8.04/8.10, Ubuntu-eee, fluxflux-eee, and Forsight Mobile (I have been going crazy trying to find a distro I can live with/ even close to what Arch provides). Each one of them I set the / partition on the internal SSD and the /home partition on the SDHC card. Arch is the only one that gives a error with the SDHC card. I have ran extensive tests in Linux and also windows(sisoft sandra) but everything is fine with the card. The card is supported as it is a "Eee PC Edition Model" http://www.newegg.com/Product/Product.a … 6820211300  I have noticed tha some distros have problem with installing via a usb drive and using /home on a SDHC drive(only Fluxflux-eee) but it is normally a /etc/fstab issue not the I/0.
    Any ideals?
    THanks
    BTW: The card is only 2 weeks old.
    Last edited by securitybreach (2008-11-14 07:26:14)

    hi guys,
    I had a similar bug on my netbook with the Elantech touchpad. I have reported a bug to the maintainer of the Elantech driver and I get a patch that fix it.
    description of my bug:
    with two fingers above the touchpad, tap alterrnatively with each finger on the touchpad.
    - expected behaviour: the cursor does not move.
    - actual behaviour: the cursor jumps sometimes to the left or the right.
    this only happens when configuring the touchpad with synaptics (by defaults, mine is detected as a mouse)
    is your bug the same than mine ?
    are you using both the proto=exps option and synaptics ? (I still have the bug in this configuration)
    if it is the same bug, I have submited the patched kernel to AUR

  • Several issues only with executable, not in VI

    Hello, I'm developing a program to control a network analyzer from GPIB, store data, read that data into some matlab (math script) routines to determine pass/fail and plot a pattern, then save a screen-grab of that pass/fail/pattern. Everything works as I expect it to in the development environment, but when I build it into an executable and run it on the same development machine, weird things start to happen that I don't understand. I know from past that executables run faster than vi's so I have added time delays here and there where it seems to make sense for that particular bit of code, but even that has not helped.
    There are 3 main issues:
    1.) I populate a listbox from a folder with filenames that match a pattern. This works great. There is an event structure that waits for one of the files to be selected which then sends that file into a subvi that runs through the mathscript routines. Problem is in the executable, after this mathscript subvi executes, all the contents of the listbox disapear and I can't select another file to run through the mathscript code. stopping and starting the main app re-reads this in but it should be read in continuously because its in the main programs for-loop.
    2.) The mathscript routines were developed by someone else, they are in several nodes. The first two nodes work perfectly to generate 2 patterns, find beam peak, position, and beamwidth, but the next two, which are identical, don't seem to work in the executable. They should produce sidelobe levels, but don't.
    3.) The screen-grab bit doesn't work in the executable either, I found a vi from Alex T. (https://decibel.ni.com/content/docs/DOC-19720) that automates a print screen event and then reads the clipboard to output image data which I then save as a jpg or png. This I had to add delays in to get the vi to work, but it still doesn't work in the executable.
    Any help or ideas would be greatly appreciated. Even if its just the basics- I'm pretty much self-taught  and don't profess to know the best way or even the right way
    Jamie
    Attachments:
    Phase Scanner_S Folder.zip ‏4123 KB
    main code.jpg ‏753 KB
    mathscript subvi.jpg ‏753 KB

    Error code -90093:  LabVIEW:  The LabVIEW Run-Time Engine does not support this function.
    Looks like you are using something that is not available in the RTE.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • 351 Issue only with delivery schedule wise

    Hi,
    Is it possible to issue (351) materials based on delivery schedule wise. Like in GR we get the receipts by del schedule wise.
    Like i have SA 111111 for qty 999 and del sch is as below,
    SA             target qty
    111111        999
    Del schedule for the above is :
    01/01/2009      100
    01/10/2009      200
    01/20/2009      400
    01/30/2009      299
    Say when I issue using MIGO or MB1B for 351 Mvt type we get all the 999 quantities. What my requirement is i shld be able to get as per the del schedule lik four line items for this SA as in GR. If we do the GR for the above SA then it will show four line items. So we need as per GR only.
    Is this possible or is there any changes we need to do or is there any userexit we can use to achive this.?
    I appreciate your quick response.
    Thanks,
    Suresh

    why do you issue with MIGO when you use SD delvieries?
    You can issue from within the delviery by clicking the goods issue button, or with VL06G

  • Family sharing feature issue

    I want to add the account of my son's iPad email in my list of family sharing as i will be paying for all purchases and want to share some purchases i have with him. I am using USA account but without credit card as i am using iTunes card for all my purchases.
    Now when i try to add his email address in my family sharing, it asks me to update my credit card information even though i have already got 15$ iTunes card loaded in my account.
    Please let me know what to do now? Should i add the credit card ? if i will add the credit card then during my next purchase, will it ask me to buy it from my iTunes card or credit card ??? i m confused now.

    Hello, I wanted to let you know that when you want to use the function of family sharing it will be necessary to add a credit card to the account, and the organizer of the group is the responsible to do so. Each family member can continue to redeem gift card on account and use that store credit on their own. But in order to actually set up the family sharing it is required that the organizer enter a credit card on the account, Without it you won't be able to set it up.
    Now, if you have store credit on your account at the moment, and yo make purchase on your account, the store credit will be charge for the purchases you make on your account before it actually charge the credit card, now if one of your family members does not have store credit on their individual account, then the purchase they make will be charge to your credit card, not the store credit that you have on your account.
    This article might be useful since it explain the Family Sharing :
    https://www.apple.com/icloud/family-sharing/
    Family purchases and payments - Apple Support 
    Hope the information helps.

  • Uninstalled Itunes because of issue, reinstalled with newest version, now it won't read my library.  Error message "The itunes library.itl cannot be read because it was created by a newer version of itunes"

    Error message when opening itunes...The itunes library.itl cannot be read because it was created in a newer version of itunes... how do i fix, it will not open with any of my ipod, ipad, iphone. 

    I don't know why this error occurs, unless you have attempted to downgrade iTunes.
    This method should get you up and running again.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • Weird problem - having issues *only* with 1UP's podca

    I subscribe to a lot of podcasts - UP, IGN, TwiT, etc., and they all work fine instead of UP's. However, it doesn't appear to be a problem on their end.
    If I download their podcasts via Juice or directly from the web site, they work fine. However, if I download any UP podcast using the Zencast application, the duration of the podcast appears incorrectly while playing it on the Zen. The podcast continues playing past the "end time", however it makes seeking and resuming playback a pain in the butt.
    With every other podcast I subscribe to, this does not happen. Any ideas?

    It seems to have something to do with the way up handles the podcast information. I've worked out a (slightly) less annoying way of dealing with the issue, although it does require you to have the mp3 handy, so you don't get the convenience of using a podcast organizer.
    1) Head to http://audacity.sourceforge.net/download/ and download the Audacity audio editor. (It's absolutely free and really small)
    2) Download up podcast
    3)Load the podcast mp3 into audacity. (File > Open)
    4)Save the podcast as a new mp3 (File > Export as Mp3)
    Now just load the file into your Zen, and it should show up as the proper length. Unfortunately, while it isn't the most elegant solution, it's the best I think you'll be able to do, because I believe the problem is on up's end.
    Hope this hel
    ps.

  • Possible to have ITunes for updating IPod only - with r/o access to media?

    Hi,
    I have this music collection (FLAC) on a Windows server. I want to have that music on my IPod also. Is it somehow possible to have ITunes have read-only access to this collection - perhaps using Firefly media server - and just import them into a client PC and have it update an IPod?
    Hope you get my meaning here...
    Werner

    Firefly will give ITunes oppertunity to update tags, create album photos etc. And this is something I do not want. I want ITunes only to read (read-only access) and just transfer the music to an IPod.
    Okay.
    Go to iTunes prefs -> Advanced.
    Uncheck Copy files to iTunes music folder when adding to library.
    Just make sure the *iTunes music folder location* is set to some place other than the media server. The default location (for Vista) is \Music\iTunes\.
    Note: If you RIP a CD using iTunes, it will go into the iTunes music folder in Artist/Album folder.
    Now you can File -> Add folder to library and select the top level music folder on the server.
    iTunes will add to the library what it can in that folder and subfolders but it will not copy them to the iTunes music folder. It will not do anything to any of the tags or filenames.
    As noted, not iPod will not play FLAC files.
    Supposedly, iTunes for WIndows will play Ogg FLAC, using -> Xiph QuickTime Components

  • Issue only with DE text

    Hi Experts,
    SRM version is 5.0 and Support pack is SAPKB70009.
    WF triggered, workitem sent to user's Lotus notes. If user is German, he sees Subject text as #EBP_GEN# <main subject text>.
    But if the workitem is sent to user other than German, he sees the main Subject text properly.
    What could be the reason, is it patch level or something else.
    Aditya.

    Hi
    i recommend you to create a OSS message for quick assistance.
    there are some threads expain you this issue. i could not search for you now.
    please update your message clearly .
    with screen shots,
    what program you run with variant and language options..
    lotus notes details if possible.
    definetly you will get reply with answer with in 48 hours.
    i am not very sure . but it can be solved easily by SAP by some settings in lotus notes configuration.
    let s wait for others reply.  honestly i dont know. you can search Pierre vanhohoove name  . he might have answered in this forum long back on this issue. good luck..
    Muthu

  • PS2 Issue only with Neo and Neo2 not Neo 4 or later boards?

    I just wondered. Is the so called PS2 issue something that is only relevant to the Neo and Neo2 motherboards, or does it plague the MSI Neo4 Platinum/SLI, MSI Neo4 Diamond, MSI Neo4 Platinum as well?

    The issue where the use of a PS2 keyboard or mouse, for certain users, causes the system to freeze during post/boot, or sometimes cause random shutdown or startups. I've found several references to it on this forum. Thats why I want to know more before I decide on which motherboard to get.

  • Color issue only with finder on a dell U2410 screen

    Hello...
    I've got a macbookpro 15' with snow leopard. I've just connected a second display screen (DELL U2410) through a mini display to DVI adapter.
    On te Dell, when i look a photo in the finder/cover flow, the reds are satured. And when i look the picture on "preview", it looks normal.
    I've took a capture of this :
    http://www.23h00.net/div/capture.jpg
    On the left, the picture with preview, on the right the same picture on finder.
    It's Amazing ?
    thanks.
    cyrille

    Try creating a new color profile (and then going back, if creating a new one doesn't solve it). Go to System Preferences > Display > Color

Maybe you are looking for