TS2972 Music played through Apple TV the streaming is really slow & jumpy

I have just installed a new Apple TV & have my music library loaded in iTunes library on a new MacBook Pro. However, when I try to play music track through Apple TV the streaming is frustratingly slow and track often jams after a few seconds and/or become really jumpy etc. The wireless connection appears to be strong enough - showing full bars in the wireless icon on laptop. But the apple TV signal only shows 2/3 bars out of 5.
Does anyone have any ideas on how to fix? Do I need to compress the music files (from downloaded CD's) into a smaller file size or different format? I notice that music that I've downloaded from iTunes store seem to stream & play without any problem.
Meanwhile the photo library loading is also painfully slow through Apple TV - assume this is due the same problem?

Welcome to the Apple community.
You need to get your network working better than it is.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Similar Messages

  • When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

    When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

    Because the location for each song in your library is on your hard drive.  If the hard drive isn't there, how can iTunes play it?
    You'll have to move/copy the music from your hard drive to your computer's hard drive.
    Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
    -Delete EVERYTHING from iTunes, so that your library is now empty.
    -Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down.  You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
    -Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes.  Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked.  You can close Preferences now.
    -Now, drag and drop your music from your hard drive into your iTunes library.  iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
    Shouldn't have any more problems...

  • I have Mac mini and I'm trying to listen to music through YouTube it works. But my problem is that instead of the music playing through the tv speakers it plays through the Mac box. ):

    I have Mac mini and I'm trying to listen to music through YouTube it works. But my problem is that instead of the music playing through the tv speakers it plays through the Mac box. ):

    Are you using HDMI or an Apple Airplay Module to go to the TV Speakers?
    If you are using an HDMI it's straight through output. The internal speakers are disabled.
    If you are using an Airplay Module:
    - Go on iTunes
    - Locate the Airplay icon that has a TV with an up arrow icon much like your iPhone has for Bluetooth
    - Click on that and Airplay to ModuleName

  • The latest version of itunes on my imac keeps quitting while playing through apple tv. Anyone having the same problem?

    The latest version of itunes on my imac keeps quitting while playing through apple tv. Anyone having the same problem?

    Are you downloading iTunes form an Apple website or somewhere else? If the answer is somewhere else, try downloading it from Apple. Click on iTunes in the black menu bar above and go from there.
    Let us know what happens.

  • TS5150 With certain movies I have downloaded digitally through Itunes or certain movies through Netflix played through Apple TV, I am only getting partial sound.  I am missing one or more sound tracks.  Am I missing something in the settings for Apple TV?

    With certain movies I have downloaded digitally through Itunes or certain movies through Netflix played through Apple TV, I am only getting partial sound.  I am missing one or more sound tracks.  Am I missing something in the settings for Apple TV?

    Are you using a stereo receiver or surround sound system for the audio by chance.  What you are describing sounds like a receiver that is not setup correctly, or does not have the speakers connected to it correctly to support Dolby surround, 5.1 or 7.1.  Which is why it is only happening on some content.  It would only be on the ones that are encoded to support Dolby audio.

  • Why isn't my music playing through my headphones?

    Why isn't my music playing through my headphones?

    Have you tried a set of headphones that work in other devices?
    To rule out a software problem try in order:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factoerydefaults/new iPOd
    If still have a problem you likely have a problem with the headphone jack and you need to get the iPod or jack replaced.
    Apple will replace the iPod for:
    Apple - Support - iPod - Repair pricing
    Third-party places will replace the jack. Here is one:
    DigiExpress.us - The iPad Repair Professionals

  • My ipod warranty ran out a few months ago I have a nano 5th gen. The problem is that if I want to play a song it would show the album artwork for about 3 seconds and go back to the main menu with no music playing. It'snot the head phones or ear jack. help

    My ipod warranty ran out a few months ago I have a nano 5th gen. The problem is that if I want to play a song it would show the album artwork for about 3 seconds and go back to the main menu with no music playing. It'snot the head phones or ear jack. Please I Need Help

    See this Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/nano5gen/
    Reset
    How to reset iPod

  • HT204291 Is it possibly to have iTunes music play out of both the computer and AppleTV while using Airplay Mirroring for the TV?

    Is it possibly to have iTunes music play out of both the computer and Apple TV while simultaneously using Airplay Mirroring to view the computer screen on the TV? Whenever I try, by clicking on 'computer' radial button for volume in iTunes Airplay, the TV automatically reverts to the Apple TV screen. I usually end up using preferences to 'bring back' the audio to the computert while leaving the picture on the tv, but this means i have to suffer from the inferior sound quality of my Macbook internal speakers.

    See:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site
    Restore from backup. See:
    iOS: How to back up
    Restore to factory settings/new iPod
    BTW this is the iPOd touch forum

  • When I am listening to music whether through pandora  or the music ap it stops working when I bring up safari. It worked before I updated, is there a solution in fixing this?

    When I am listening to music whether through pandora  or the music ap it stops working when I bring up safari. It worked before I updated, is there a solution in fixing this?

    Reboot your iPad and see if that helps.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Why is video/audio jerky when computer played through Apple TV?

    I have my MacBook Air connected to my TV through Apple TV and Airplay.  When I am watching movies or TV shows from my computer through Apple TV, the sound and picture on my TV is often jerky, with sound going in and out and video freezing then starting up again.  When I disconnect from Airplay, the movie plays perfectly on my TV screen.  Why is the sound and picture so bad when playing through Apple TV?  I use a brand new Airport Extreme as my router.
    Thank you,
    Ian

    Dear Vazandrew, many thanks for your advice. The issue was non-existent with OS Maverciks and appeared after upgrading to Yosemite on iMac 2013. In addition to the stutter of image and audio on airplayed content in regular intervals, it is virtually impossible to disconnect the airplay from the Apple TV by selecting "disconnect airplay display" - one needs to restart the machine to disconnect. The configuration includes the latest release of Apple TV, with latest software, the latest Airport Extreme, with latest software, and the 2013  iMac with the latest OS - Yosemite. I would like to reiterate there was no stutter issue with Macericks and a google serach of the stutter issue shows this issue was reported by other users as well - following upgrade with the official Yosemite and a number of report during the beta testing of Yosemite.
    I would be happy if someone could please advise how this issue could be escalated so that a proper attention is paid by Apple.

  • Certain music videos will not play in iTunes.  The music plays fine but not the video.  No picture.

    Certain music videos will not play in iTunes.  The music plays fine but not the video.  No picture.  Same with the iPod.  Other videos in the library play fine. Help.

    Regular playlists vs smart playlist does not make a difference. What I noticed is that some videos create this behavior and some not. I created 2 videos and 2 music playlists, one with 2 songs and 2 videos (that I encoded myself with Handbrake). Another list with 2 videos and 2 songs, videos encoded with Handbrake, but that I noticed they triggered the behavior. The first playlist played fine, with no problems. The second one, created the problem. When I look at the video, it is the same type of video (bit rate, audio channels, etc...) I don't see why it would do that.
    Later I will test: playing those videos in question and then selecting songs to see if they play.

  • Why is my music playing through headphones and speaker?

    Just yesterday my iPod Touch started acting weird. First it would play my music for awhile, then pause. I would hit play, then it would start playing but only through the speakers. It would then start playinh through the earphones then pause again. And then this morning my iPod started playing through both the speaker and headphones. Help!
    ps- I have an iPod Touch Second Generation That Has Been Recently Restored

    Try the following to rule out a software problem:
    - Reset the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup.
    - Restore the iPod to factory defaults/new iPod.
    If you still have the problem it is likely due to a hardware problem like maybe the headphone jack.  I would them make an appointment at the Genius Bar of an Apple store.

  • IPod Shuffle (2nd Gen) - All Appears Well, but No Music Plays through Buds

    I recently purchased yet another iPod Shuffle (2nd Gen), after frying the 1st one. This one synched and played well for about a month. Recently during a run it stopped playing. I assumed it needed to be charged. I fully charged. iTunes recognizes it - and displayed all my music. However, it still wouldn't play any music through the ear buds. I tried the reset (toggle on / off hold) - didn't work. I put it back on iTunes and reset it back to factory settings, reloaded it with music, iTunes still recognizes it, yet still won't play. It appears to be functioning properly - except for the "playing of music" part. iTunes recognizes it, the music is displayed in iTunes. When I turn the shuffle on the light glows green, then goes out. When I push the volume up or down - the green light blinks once for each push. When I push the skip forward or back button the green light blinks once for each push. No orange lights anywhere. But no music plays. Please help!!

    Just thought I'd post to say that I'm having the same problem.
    Everything appears to be normal with my shuffle: iPod syncs, all the lights are doing what they're supposed to be doing, I can see the music I put on the shuffle.
    I too went back to factory settings, reloaded tunes, etc. etc. I have also checked both the earbuds I'm using (they work) and tried the shuffle with other earbuds (earbuds I tested elsewhere and which also work)... no sound.
    Is it possibly related to the recent iTunes software update 8.0.2 (20)? I ran it on Friday and things were fine on my shuffle immediately after. But the next time I tried to use it -- no sound.
    That update is the only change I can think of that my shuffle experienced proximate to the problem.

  • Play through apple tv while editing? imovie using apple tv as live video monitor

    HI. I have imovie HD running on my macbook pro and would like to play back the video i am editing directly through apple tv - while editing - without having to render first - . i know there would be latency - but that would be fine.... is there anyway to do this?????
    nic

    Hi
    Are You using iMovie HD6 and want a live full screen video playback during editing ?
    If so - that's what I've done all the time since iMovie 1.
    BUT - to get this I use either
    • a miniDV tape Camera with DV-in - or
    • an A/D-box as Canopus ADVC-300
    Then in iMovie I set - Playback trough Camera (in iM preferences)
    Camera/A/D-box connected via FireWire
    To Camera or A/D-box I've connected a reference monitor - but any standard TV will do
    A function lost in iMovie'08 to 11 - but also fully functional in FinalCut Express and Pro (How it is in FinalCut Pro X - I DO NOT KNOW - and doubt sincerely - as it feels much more like iMovie X Pro)
    Yours Bengt W

  • N8 Music playing through a TV or AMP

    Hi, firstly I love the N8.  Best purchase in a very long time.   The only concern I have is with the music being played through my TV via the HDMI cable or separately through my speakers/amp via the phono jack port (headphone port).  The music plays and I am happy with that but the sound seems to fade in and out sometimes.  I.e gets quieter and louder.  It seems the phone is buffering to output the sound.  Has anyone else experienced this?  I don't think this is an issue but I'd like to know why this happens?  This happens on all of my music stored on my N8 being played through the port on the phone.  Kindest regards, T

    This is the latest version. All updates are provided via iTunes. Every time you connect your device, iTunes will check for updates or show you when it will check again. This info is displayed in the summary pane when your ipod is connected.
    Downloading from other sources can damage your device or keeping it from updating in iTunes after that.

Maybe you are looking for

  • Vendor Return Excise Invoice + VAT

    Hi All, We are make Vendor Return Excise Invoice wrt J1IS and Credit note by MIRO, But we want one consolidated print with Excise +Vat, How the same can be done Regards Niti Narayan

  • BPM + PROXY + Fault Message

    Hello My scenario is JDBC -> BPM <-> Proxy I developed a BPM has a step-type <SENDER> that is synchronous. Information on the above step:   . The message interface used an output, an input message and also a Fault Message. . I'm calling a proxy in th

  • Error to Define Tax Relevancy Of Master Records

    Hi , I created a condition type ( Y007)  with category as 'D' ( TAX) and  class as 'A'. and then i tried to  Define Tax Relevancy Of Master Records ( Customer taxes) but it gives the message "Condition type Y007 is not defined for taxes" . its fine w

  • Firefox open links in new tab even if its shuold not be opened in a new tab

    when i open a link it will open in a new tab even i fix the settings still it opens i new tabs. how can i fix this?

  • Diff. bet ABAP  and SAP Query

    HI Anybody can explain in detail about ABAP  and SAP Query..... And tell me what is the main diff. bet ABAP  and SAP Query... Regards S.Baskaran