TS2972 why is the import button not showing at the button right hand corner of iTunes?

why is the import button not showing at the bottom right hand corner of my ITunes page.  I am trying to transfer files from my home share library onto a new computers library.

See if it isn't hidden under the View menu. iTunes- Turning on iTunes menus in Windows 8 and 7.

Similar Messages

  • When trying to backup and sync my ipad and iphone with itunes the device does not appear int he upper right hand corner anymore

    when trying to backup and sync my ipad and iphone to itunes it does not appear in the upper right hand corner under devices for me to click on

    In that same window - the one where you see your backups - click on the box at the bottom that say -Prevent iPods, iPhones and iPads form syncing automatically. Then click OK and quit iTunes.
    Connect your iPad to the computer and launch iTunes. Right click on the iPad name on the left side under the devices heading and select - Restore from backup. A window will pop up from which you can select any of the backups that you have for the iPad. Select the backup that you want to restore from and then go agreed and restore the iPad. Sync with iTunes when you are done.
    Remember that when you restore from a backup - you restore everything in that backup to the iPad. You cannot selectively restore content. It is all or none.

  • Why is my texing keyboard not showing on the screen? I have the latest version sw of 6.0 on a 4S

    Why is my texing keyboard not showing on the screen? I have the latest version sw of 6.0 on a 4S

    Double tap Home button, delete Messages from the multitask-bar.
    Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
    Note: You will not lose any data.

  • Why my old emails are not showing on the blackberry

    Hi Guys,
    I have just bought Blackberry Curve 9360. Can somebody, please tell that why my old emails are not showing on the blackberry. May be it has not synchronized my whole mailbox.
    Kindly advise how can I do that.
    Regards... Murtaza

    Old emails, in what manner? As in previous to installing the account on this device?
    Did you use the Device Switch Wizard found in the BlackBerry Desktop Software?
    How did you move your old emails over from the old device to the new?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Why are my Whatsapp photos not showing in the Camera Roll? I have checked all the settings and everything seems ok.

    Why are my Whatsapp photos not showing in the Camera Roll? I have checked all the settings and everything seems ok.

    Have you enabled "Save incoming Media"
    in your whastapp\Setting\Chat setting\Save Incoming Media?

  • I used my ipad to transfer music to my wife's pc, now I have reconnected to my mac and itunes is not recognsing it - the ipad is not showing in the sidebar

    I used my ipad to transfer music to my wife's pc, now I have reconnected to my mac and itunes is not recognsing it - the ipad is not showing in the sidebar and syncing not happening. I have tried resetting ipad and restarting etc but still no joy. Anyone had a similar experience?

    Take it to the Apple Store for evaluation.
    Try this.
    Restart the iPad by holding down on the Sleep button until the red slider appears and then slide to shut Off. To power up hold the Sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the Sleep and Home buttons at the same time (for about 10-15 seconds) until the Apple logo appears (ignore the red slider), then let go of the buttons.
     Cheers, Tom

  • Prices for the characteristic is not showing in the webshop

    hi all,
    we are facing a strange issue.
    When we are trying to select configuration for the configurable product the prices are not showing in
    the webshop against each configaration option but when we press the accept button after selecting the configuration the prices are adding automatically to the total.
    our actual requirement is we have to show the prices against each configurable part of the configurable product in the webshop.
    Whether we have to implement any special IPC user exit for this ?
    there is already one standard implementation com.sap.spc.document.impl.userexit.csticValueSurcharge.StandardImplementation
    under the CVS type userexit with the std delivery.
    Note:we haven't done any custome development in this page of the webshop.
    Please help it is urgently needed
    Thanks and Regards
    shanto allor
    Edited by: shanto aloor on Mar 13, 2009 3:49 PM
    Edited by: shanto aloor on Mar 16, 2009 1:47 PM

    Hi Shanto,
    The business requirement you have can be managed by the field catalog.
    I think you will have to maintain the value of all possible combinations while you are selecting the characterstics.
    You will have to add a field to the field catalog at item level  and subsequently included this field in a condition table, access sequence and condition type.
    When attributes of field catalog are being passed to IPC, you need to populate this new field by writing a code in BADI   CRM_COND_COM_BADI.
    Then in the WEB UI the field can be accessed  using java code , i think this shud help you.
    Wish u gud luck for this assignment.

  • TS1538 The device do not show at the itune after update at itune

    How to solve the device do not show at the itune after the update thru itune.
    Now the ipad mini keep show the screen on "USB syr to itune"

    Try and turn off iPad and proceed to step 3 of Recovery Mode.
    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • I cannot unlock my phone. When I hit the number the key is highlighted but the "dot" does not show in the passcode box. Have shut it off and restarted nothing. Held on/off and "square" key to reset but still nothing. Any ideas on how to resolve this issue

    I cannot unlock my phone. When I hit the number the key is highlighted but the "dot" does not show in the passcode box. Have shut it off and restarted nothing. Held on/off and "square" key to reset but still nothing. Any ideas on how to resolve this issue

    Connect to iTunes and try to reset it from there.

  • Make the emails do not show in the ipad or iPhone after i read them in my macbook air

    make the emails do not show in the ipad or iPhone after i read them in my macbook air

    Assuming you're using Apple's Mail on your Mac, go to your Mac's mail Preferences (from Mail on the menu bar).
    Click Accounts on top, then click your email account on the left.
    Then click Advanced on the top.
    Check "remove copy from server after retrieving a message" and set the line below it to "immediately".
    That will do it.

  • The approver does not show in the approval preview after saving sh. cart

    Hi ,
    I would appreciate if anyone can reply me for fixing the problem.
    Problem: The approver does not show in the approval preview after the shopping cart is saved, however before saving the shopping cart it shows the approver in the approval preview. We are using two workflows: WS10000060 – Auto approval and WS10000276- 1 level spending limit approval.
    Details of the problem:
    The following steps specify the problem in detail , it is applicable for both the workflows “WS10000060 – Auto approval and WS10000276- 1 level spending limit approval.”
    1.     Shopping created
    2.     The approval preview shows the approver ( please see #1 in the attached document) before saving the shopping cart.
    3.     Shopping cart is saved.
    4.     After saving , Check status transaction shows the shopping cart in status “awaiting approval”
    5.     The section approval shows “ No workflow started , application error occurred”
    6.     T.Code SWI1 shows the workitem created for the shopping cart but in error.
    7.     The work item container does not show any agents
    I would appreciate it anyone can reply as to how to fix it ASAP.
    Best Regards
    Pawan

    Hi Disha,
    I have synchronised through SWU_OBUF several times since yesterday , but still at the same place.
    In the workflow customising - The only red entry which I have is for check entries from HR control tables under Mainiatin definition env. and Mainiatin guded procedure for gateway under guided procedure (new in SRM 5.0) .The verification workflow works fine . Also I think these entries will not impact the workflow functionalhese were red even in my earlier system .
    SLG1 shows all green entries and there are no entries in RZ20.
    I have specified task TS10008126 as general task as I want anyone who is identified by SLAapprover should be able to process the workitem and as per documentation I can specify this task as standard task.
    What should I do.. , anything am I missing .
    Thanks and Best Regards
    Pawan

  • Hello - I used a Sony DVD to burn 350 songs. When I put the DVD into another computer to rip those 350 songs, the 'import songs' button never appeared in the lower right hand corner of iTunes. What's preventing songs from being ripped?

    Hello - I used a Sony DVD to burn 350 songs from my iTunes library to share with a friend. When I put the DVD into my friend's computer to rip those 350 songs, the 'import songs' button never appeared in the lower right hand corner of iTunes. Anybody know what's preventing me from ripping what's on the DVD? 

    When I put the DVD into my friend's computer to rip those 350 songs, the 'import songs' button never appeared in the lower right hand corner of iTunes.
    The import command only works with audio CDs. So if you burned the files in mp3 format, try instead using the "File > Add file to library" or "File > Add folder to library" commands.

  • I changed my browser fill and the update does not show in the preview mode

    I changed my browser fill and the update does not show in the preview mode. I saved and restarted muse but the problem is still there. Any thing else I can do? Could it be something that changed in the file?

    Hello,
    What did you put in the "browser fill" area, an image or a color? WIth gradient or with solid color? Also, does it show fine if you "Preview in Browser"?
    Screenshots showing the Browser fill section (like this: http://screencast.com/t/RHqdVPP4) and the display in Preview mode would also be helpful.
    Cheers
    Parikshit

  • Payment from the customer is not showing in the lockbox transaction.

    Hi all,
    When i execute transaction code FLB1, I could not able to find lockbox and  customer did the payment  but it was not reflected in sap.
    Payment from the customer is not showing in the lockbox transaction.
    Please suggest and gide me with solution what could be the reason  i am not awear of lockbox process.
    Regards,
    JC
    Edited by: jcnaidu on Sep 17, 2010 6:41 AM

    The messages are getting to the recipient...
    I am on a Comcast IMAP server if this has anything to do with it and the server settings are following the correct server port numbers, SSL settings, etc... I save Sent messages on the IMAP server for 90 days.... None of these "disappearing" messages were on the server for more than a couple of days.. Typically, these messages will get 'hung' in the Outgoing Mailbox for @30 seconds before sending... like they are being scanned for viruses or Mail can't connect to the server all of a sudden...
    I anybody else here is on a Comcast IMAP server, and having this problem of disappearing Sent messages... This would tell us that it might be a Mail Provider issue with their outgoing server...
    --prd54usa

  • I am trying to play music and videos but the volume will not show on the screen unless i have head phones in also the buttons on the side will not change my ringtone volume

    i am trying to play music and videos but will not see the volume control unless i have head phones in also phone will not move off silent mode and wont turn up with the volume buttons

    its not showing the headphone sign its showing ringer when i press the button but no volume i have tryed to restore it but didnot work

Maybe you are looking for