TS3048 Battery jammed inside bluetooth keyboard when trying to change for first time

Battery jammed inside Bluetooth keyboard when changing first time. Help

Verify from permission of user that you use it in upgrade, make sure that scom machine and user that you use it in upgrade in sysadmin group in database of operationsManager and OperationsManagerDW
Also Verify from Prerequisites of Upgrade SCOM 2012 sp1 as below link
http://technet.microsoft.com/en-us/library/jj656654.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Similar Messages

  • Lightroom "quits unexpectedly" when trying to open for first time

    Installation was successful, etc. here's an excerpt from the crash report:
    *** Terminating app due to uncaught exception 'LuaRunException', reason: 'AgPathUtils.getStandardFilePath: can't create directory at: /Users/stephenkierniesky/Library/Application Support/Adobe/Lightroom'
    terminating with uncaught exception of type NSException
    abort() called
    Being a "newbie" perhaps there is a very simple solution that i am unawares of. thanks.

    You have to unhide your library folder and adjust the user permissions to allow write access.
    Mylenium

  • Itunes application error when attempting to open for first time. HELP

    Running windows xp pro, just bought new ipod classic, installed itunes software. When attempting to open for first time i get an itunes.exe - application error, error message that reads "The instruction at "0x100001040" referenced memory at "0x100001040". The memory could not be "read". Click ok to terminate the propgram. Click on CANCEL to debug the program. I have tried re-installing several times, cleaned temp etc. Nothing. Please help, i really want to start using my new ipod.

    You have to unhide your library folder and adjust the user permissions to allow write access.
    Mylenium

  • Error when launch MaxDB studio for first time

    Dear, Experts
    I faced with one issue for launch MaxDB studio for first time.
    It reported:
    Connect user failed
    SAP DBTech JDBC: Cannot connect to jdbc:sapdb://.../.UMDB [Restart required].
    Creating default user management failed
    Could not create database ".UMDB": [C:\sapdb\clients\DatabaseStudio\pgm\dbmcli.exe] > ERR, -24832, ERR_SHMNOTAVAILABLE ...
    Could you please help me on this?
    Thank you in advance.
    Best Regards

    If not solved yet...
    What says appsrv.log ? Which user are you using to start the appserver ? Which user have you specified when sreating the database ?
    Nicolas.

  • Error when booting app server for first time

    Hi All,
    My OS is OEL 6,PT 8.53 and HCM9.2 after creating the app server domain and booting it for first time i am getting an error as below,
    exec PSWATCHSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 221921 -D TESTSERV -                              S PSWATCHSRV :
    CMDTUX_CAT:816: ERROR: Cannot exec, executable file not found
    tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error ha                              ndler
    exec tmshutdown -qy
    Any help appreciated.
    TUXEDO LOG Says,
    162253.wipcoe1234!tmloadcf.5379.1098766080.-2: 05-03-2013: client high water (0), total client (0)
    162253.wipcoe1234!tmloadcf.5379.1098766080.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
    162253.wipcoe1234!tmloadcf.5379.1098766080.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 1197 512-byte blocks)
    162253.wipcoe1234!tmloadcf.5379.1098766080.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file /home/oracle/psft/pt/8.53/appserv/HCMDM92/PSTUXCFG has been created
    162253.wipcoe1234!tmloadcf.5384.2986219264.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
    162253.wipcoe1234!tmloadcf.5384.2986219264.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 1197 512-byte blocks)
    162253.wipcoe1234!tmloadcf.5384.2986219264.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file /home/oracle/psft/pt/8.53/appserv/HCMDM92/PSTUXCFG has been created
    162258.wipcoe1234!PSADMIN.5355: Begin attempt on domain HCMDM92
    162302.wipcoe1234!tmadmin.5392.1509406464.-2: TMADMIN_CAT:1330: INFO: Command: boot -A
    162304.wipcoe1234!tmboot.5393.2297452288.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
    162304.wipcoe1234!tmboot.5393.2297452288.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
    162304.wipcoe1234!tmboot.5393.2297452288.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
    162306.wipcoe1234!BBL.5394.2180380416.0: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit, Patch Level (none)
    162306.wipcoe1234!BBL.5394.2180380416.0: LIBTUX_CAT:262: INFO: Standard main starting
    162308.wipcoe1234!tmboot.5397.3909768960.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
    162308.wipcoe1234!tmboot.5397.3909768960.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
    162308.wipcoe1234!tmboot.5397.3909768960.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
    162308.wipcoe1234!tmboot.5397.3909768960.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
    162311.wipcoe1234!BBL.5394.2180380416.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
    162314.wipcoe1234!PSADMIN.5355: End boot attempt on domain HCMDM92
    Edited by: ajith on May 3, 2013 5:39 PM

    If not solved yet...
    What says appsrv.log ? Which user are you using to start the appserver ? Which user have you specified when sreating the database ?
    Nicolas.

  • Slight Color and Quality Shift when viewing RAW files for first time in Library Module.

    Hello,
    I have been shooting RAW for a while and have notice that after I import the images and then start to view them in the Library Module I will see a slight color and quality shift - almost looks like a white balance shift but not quite.   I was thinking that perhaps there was some automatic preset being applied but I don't have any presets at all.
    I am shooting with a Canon 1DX as well as 7D.  I have not checked to see if I get this situation with the 7D, but I know for sure that I get it with the 1DX.
    Today I was reviewing some images in Bridge and decided to open one of them in Camera RAW.   At that time I discovered that the camera's Image Style Settings were available, Faithful, Standard, Portrait, etc.  I noticed that the images did not have one of the camera styles applied to them but rather the Adobe Standard Style. At that point from within RAW I selected one of the camera's styles and bingo thats the kind of shift I am seeing when I first view an image in LR4 Library.
    So as far as I can tell the RAW images are getting the Adobe Standard style applied in LR.   I have no idea if this is a default behavior of if I have done something to cause it.  I'm also thinking that perhaps LR does not necessarily apply the Camera's Styles automatically even though the particular style has been set in the camera -- perhaps is not imported as part of the metadata during the import and thus defaults to the Adobe Standard.
    I guess what I need to know is a few things and I hope someone can educate this newbie! 
    1. Should I expect LR4 to apply the Style as set from the camera automatically or not at all?
    2. Can I prevent LR from applying the Adobe Standard Style and apply no style?
    3. Can I cause LR to apply the Style as set in the camera for the particular image to be appied automatically upon import?
    Thank you for any guidenace you can offer.  Of course if you need additional information or clarification please let me know.
    Scott

    That sort of describes it and may be exactly what is happening.  I have a shoot tonight and will pay closer attention to the process and behavior when I import.
    It is the full image that I see the shift on though.  Its not that the thumbnail and the full size image look different.  It the full size image looking one way and then shifting in front of my eyes.   
    What is frustrating is that I typically find that the image before the shift is better than what appears after the shift, so I find myself always chasing to get back to where it was and because its gone I'm chasing an invisible ideal, so to speak.   Ahhh...isnt that the life of a photographer though!
    It seems like its the last step in the render process -- if I could just figure out what it is and stop it I could finally figure out if I really care or not.  Its just so quick its tough to tell if indeed the first appearance is better.
    I'll feedback some more information when I get a better handle on this.
    Thanks for the reference.

  • MS-9130 trying onboard SATA for first time, BIOS error messages

    I have a K8T/MS-9130 based system with a single OPTERON 144 CPU and 2GB RAM. It was in service for a long time, then stored, now I am returning it to service but need to use SATA HDD.
    When I enabled SATA on BIOS, I now receive messages like this, during BIOS start-up:
    "TAB Key into user Window" (however, when I hit TAB key, nothing happens)
    "Hardware initiate failed, g to continue"
    My SATA HDD (generic 400 GB Western Digital), SATA data cable and SATA power cable were all tested temporary on a PCI SATA card in the same computer, and found to work OK. I have several SATA devices planned, so I wish to use on-board SATA interface (2 ports available.)
    Under Windows 2000 SP4, the device manager shows error for RAID SATA with this message: "Device cannot start (Code 10).
    System information during BIOS start-up:
    MS-9130 BIOS mainboard V1.3 071304
    SATA Bios 2.02
    Thank you for any help,
    Dave

    I now understand this is a frequent reported problem - when I read the forum "sticky" messages (of course, after I posted this new message, I am sorry to say), I believe the VIA VT8237 is a problem with SATA-2 drive interface, and my drive(s) is/are probably SATA-2 drive interface.
    I am sorry to waste the attention! This is probably why the reseller told me at the time (2007) that the onboard SATA was not recommended with this mainboard, but I had forgotten.
    Anyway, I will find multi-port SATA PCI card and continue.
    If this is not the common SATA-2 problem, then maybe I can get help?
    Thank you,
    Dave

  • URL getting concatenated when user logged in for first time

    Hi
        I am sending the below url to the mail as a notification .
    http://<server>:<port>//irj/portal?NavigationTarget=%3ROLExyz
    when the user click on the link ,it should route to the particular page
    case 1 when user already logged in, then after clicking of this link it opens new window and shows the particular page correctly
    case 2 when user not logged  then afetr clicking of this link it asks for user id and pwd which is ok, but  the link is getting concatenated like
    http://<server>:<port>//irj/portal?NavigationTarget=%3ROLExyz=NavigationTarget=&ROLExyz
    then showing the error message that page doesn't exist.
    I am usig Escpae URL function to encode the url ( NavigationTarget=&ROLExyz ) when sending  the link to the user in mail .
    Regards,
    Amit

    Hi,
    your value of the NavigationTarget parameter does not seem correct  - why does it start with "ampersand"?
    http://<server>:<port>//irj/portal?NavigationTarget=%3ROLExyz
    Maybe try to remove the ampersand so that the parameter looks as follows:
    http://<server>:<port>//irj/portal?NavigationTarget=ROLExyz
    Regards,
    Tanja

  • How to see text history when setting up iPad for first time

    I just got this new iPad and synced it but my text history only starts from when I set it up yesterday. How do I pull in all the history?

    I think that is not possible :/

  • Re transmission bit is set even when packet is transmitting for first time in AP-STA Concurrent testing

    Hi ,
    Test case scenario : STA-AP Concurrent test case.
    1. STAUT interface of CSR-DUT connected to Cisco-AP1252AG and T.P Ref Station Atheros-9462 connected to APUT-CSR.
    2. Run Rx traffic between Cisco-AP1252AG to STAUT-CSR and Atheros to APUT-CSR ( i,e TCP Rx/RX ) Simultaneously .
    Observations :
    1. Re transmission bit is set for packets transmitting for first time -- As seen in sniffer , Please find the attached file -- Retransmission_bit_error_capture for the instance show like wise we have many instance of the issue occurrence .
    2. There might be chance where sniffer is missing these packets but at the same time DUT cannot miss and we should be able to see Block ACK from DUT and this is not happening and more over it is happening at many instances also refer the attached sniffer capture -- TCP_rx-rx-25-19Mbps for further investigation on the issue.
    Please some one help us to understand / solve the above issue explained.
    Thanks,
    Jagadeesh

    Rather hard to put the pieces together without seeing the entire capture.

  • Macbook pro tries to connect bluetooth keyboard when waking up from sleep

    I have a 2012 Macbook pro and it is trying to connect to a bluetooth keyboard when I wake it up from sleep. The computer freezes while it is searching for the keyboard and only works properly once it discovers there is no keyboard connected. I have never used a bluetooth keyboard and I currently have my bluetooth switched off.
    Doe anyone have any idea how I might stop this from happening? It can often freeze for quite a while, which can be very frustrating.

    I have the exact same issue. MacBook Pro Mid 2012. OSX Yosemite 10.10.2. Mine is actually brand new.

  • I have a Targus Versavue bluetooth keyboard that has worked perfectly for 2 years.  It lost connection yesterday.  I charged the battery but it still won't connect.  Help ??

    I have a Targue Versavue bluetooth keyboard that has worked perfectly for 2 years.  It lost connection yesterday.  I charged the battery but it still won't connect.  I just get a blinking blue light.  Help ??

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Changed battery in laptop and now when trying to open dreamweaver cs3, I get "licensing for this product has stopped working"... contact customer support (thats a laugh).  So what now?

    Changed battery in laptop and now when trying to open dreamweaver cs3, I get "licensing for this product has stopped working"... contact customer support (thats a laugh).  So what now?
    it says:  You cannot use this product at this time.  You must repair the problem by uninstalling and then reinstalling this product or contacting your IT admin or Adobe customer support for help.
    Well it seems I am only able to install this on a maximum of 3 computers so if I uninstall and reinstall I may have used up all three.  What caused this in the first place?

    And most licenses extend to 2 machines; not 3.  Your computer's clock probably reset when you changed batteries. Is your computer's clock set to the correct date and time now?
    See Activation & Deactivation Help
    Nancy O.

  • "an error occurred when trying to change modules"

    When I switch repeatedly between Library and Develop with the R and E keys, I always sooner or later run into a problem where nothing happens when I press R. Really that should go the Develop module and enter crop mode -- what I'm usually trying to do, when this happens, is crop a bunch of photos. So I'll be using Library mode to identify the photos that need cropping, stepping through photos with the arrow keys, then when I find one that I want to crop, I press R, enter develop+crop mode, crop the photo, press E to return to library+loupe view, and continue.
    Sometimes this works 10 times, sometimes it only works twice, but always, relatively soon, when I press R, "nothing" will happen. Actually what's happening is an error dialog appears saying "an error occurred when trying to change modules", then the error dialog immediately disappears before I can read it. I know what it says, because if I click the Develop module with the mouse, I get the same message but it sticks around until I press OK.
    Once this happens, I'm entirely unable to use the Develop module until I quit the program. I had to quit and restart LR about 20 times during an hour of working with it last night, and this morning, in the first 15 minutes, I'm already on the 3rd restart.
    Anyone else see this?
    Details: LR 1.1 on Mac OS 10.4.10, 4-core Mac Pro, images are a mix of JPG from a pocket camera and NEF from a Nikon D40. I don't think it is related to the specific images, as it strikes apparently at random, and after exit and restart, I can crop that same photo, but a different one will eventually cause the same problem again.

    Sean, thanks for the Return key tip. I knew about that at one point, but lately I was trying to use Enter (the one on the numeric keypad, at the very lower right corner of the keyboard, which is really easy to hit with my thumb even when my hand is on the mouse! And Enter doesn't invoke the crop, so I forgot that Return did). That is a better way.
    I don't see the RE problem on my MacBook, only on my desktop computer, and that one is also experiencing other flakiness (
    metamatt, "missing text / thumbnails / many Lightroom UI elements disappeared" #, 18 Aug 2007 3:08 pm) so I think I'm going to try a complete reinstall there.

  • Error when trying to "Save for Web"

    I, like others have the same problem in Photoshop Elements 6 editor when trying to "Save for Web". I get an error: 
    could not complete the export command because of a program error
    I've searched the forum, but it seems like no one has found a solution.
    I have a new PC with Windows 7 on it. It's Win 7 Ultimate 64-bit. i5 processor, 16GB RAM and plenty of HD space.
    I am running Photoshop Elements 6.
    When I used the same version of Photoshop Elements 6 on my old XP computer, I didn't have this problem.
    Adobe Photoshop Elements Language Version: 6.0 (6.0 (20070910.r.377499))
    Operating System: Windows Vista
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP
    Physical processor count: 4
    Built-in memory: 15822 MB
    Free memory: 11064 MB
    Memory available to Photoshop: 1621 MB
    Memory used by Photoshop: 55 %
    Image cache levels: 6
    Serial number: 10571087952197841429
    Application folder: D:\Program Files\Adobe Photoshop Elements\
    Temporary file path: C:\Users\Roger\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      C:\, 111.7G, 76.2G free
    Primary Plug-ins folder: D:\Program Files\Adobe Photoshop Elements\Plug-Ins\
    Additional Plug-ins folder: not set
    Installed plug-ins:
       3D Transform 10.0 (10.0x001)
       ADM NO VERSION
       ASDStrm NO VERSION
       Accented Edges 9.0
       Angled Strokes 9.0
       Auto Divide 6.0.0.0 (6.0 (20070910.r.377499))
       Average 10.0 (10.0x001)
       BMP 10.0 (10.0x001)
       Bas Relief 9.0
       Camera Raw 4.2
       Chalk & Charcoal 9.0
       Charcoal 9.0
       Chrome 9.0
       Clouds 10.0 (10.0x001)
       Color Halftone 10.0 (10.0x001)
       Color Variations 10.0 (10.0x001)
       Colored Pencil 9.0
       CompuServe GIF 10.0 (10.0x001)
       Conditional Mode Change 10.0 (10.0x001)
       Conté Crayon 9.0
       Correct Camera Distortion 9.0
       Craquelure 9.0
       Crop and Straighten Photos Filter 10.0 (10.0x001)
       Crosshatch 9.0
       Crystallize 10.0 (10.0x001)
       Cutout 9.0
       Dark Strokes 9.0
       De-Interlace 10.0 (10.0x001)
       Difference Clouds 10.0 (10.0x001)
       Diffuse Glow 9.0
       Displace 10.0 (10.0x001)
       Dry Brush 9.0
       Extrude 10.0 (10.0x001)
       FastCore Routines 10.0 (10.0x001)
       Fibers 10.0 (10.0x001)
       Film Grain 9.0
       Filmstrip 10.0 (10.0x001)
       Filter Gallery 9.0
       Frame From Video 6.0
       Fresco 9.0
       Generic EPS 10.0
       Glass 9.0
       Glowing Edges 9.0
       Grain 9.0
       Graphic Pen 9.0
       Halftone Pattern 9.0
       Ink Outlines 9.0
       JPEG 2000 2.0
       Lens Flare 10.0 (10.0x001)
       Lighting Effects 10.0 (10.0x001)
       Liquify 7.0
       MMXCore Routines 10.0 (10.0x001)
       Magic Extractor 10.0 (10.0x001)
       Matlab Operation 10.0 (10.0x001)
       Mezzotint 10.0 (10.0x001)
       Mosaic Tiles 9.0
       Multiprocessor Support 10.0 (10.0x001)
       NTSC Colors 10.0 (10.0x001)
       Neon Glow 9.0
       Note Paper 9.0
       Ocean Ripple 9.0
       OnEdge 1, 0, 0, 1
       PCX 10.0 (10.0x001)
       PNG 10.0 (10.0x001)
       PNG Icons 1.22x1
       Paint Daubs 9.0
       Palette Knife 9.0
       Patchwork 9.0
       Photocopy 9.0
       PhotomergeUI 10.0 (10.0x001)
       Picture Package Filter 10.0 (10.0x001)
       Pinch 10.0 (10.0x001)
       Pixar 10.0 (10.0x001)
       Plaster 9.0
       Plastic Wrap 9.0
       Pointillize 10.0 (10.0x001)
       Polar Coordinates 10.0 (10.0x001)
       Poster Edges 9.0
       Radial Blur 10.0 (10.0x001)
       Read Watermark 1.70.19
       Reticulation 9.0
       Ripple 10.0 (10.0x001)
       Rough Pastels 9.0
       Save for Web 3.0
       ScriptingSupport 10.0
       Shear 10.0 (10.0x001)
       Smart Blur 10.0 (10.0x001)
       Smudge Stick 9.0
       Solarize 10.0 (10.0x001)
       Spatter 9.0
       Spherize 10.0 (10.0x001)
       Sponge 9.0
       Sprayed Strokes 9.0
       Stained Glass 9.0
       Stamp 9.0
       Straighten Image 10.0 (10.0x001)
       Straighten and Crop Image 10.0 (10.0x001)
       Sumi-e 9.0
       Targa 10.0 (10.0x001)
       Texture Fill 10.0 (10.0x001)
       TextureSelect 10.0 (10.0x001)
       Texturizer 9.0
       Tiles 10.0 (10.0x001)
       Torn Edges 9.0
       Twain Acquire 10.0 (10.0x001)
       Twain Select 10.0 (10.0x001)
       Twirl 10.0 (10.0x001)
       Underpainting 9.0
       WIA Support 10.0 (10.0x001)
       Water Paper 9.0
       Watercolor 9.0
       Wave 10.0 (10.0x001)
       Wind 10.0 (10.0x001)
       Wireless Bitmap 10.0 (10.0x001)
       ZigZag 10.0 (10.0x001)
    Plug-ins that failed to load: NONE
    Installed TWAIN devices:
       WIA-HP Scanjet 4800 series

    I also tried the alt/ctrl/shift buttons when clicking Editor in the Photoshop welcome screen. It did ask if I wanted to reset the preferences. I chose yes. I still get the same error message when trying to save for web.
    Below....showing I don't have a "save for web" folder on my C drive.
    And below, showing the same error after pressing alt/shift/ctrl when clicking on editor and clearing the preferences.
    I don't have a 'Save for Web' folder anywhere on my C: drive. I searched and came up with no folder with the text "save for web" in it.
    I did find a "save for web" folder on my D: drive and deleted that.. but now when I start up Photoshop, the option for Save for Web is grayed out...not able to select it.

Maybe you are looking for