TS3048 I can't log in the mouse and keyboard are not paired to computer

I can't log in to my computer because both the mouse and keyboard lights are blinking

Hello:
Try resetting the SMC (no peripherals needed).
Barry

Similar Messages

  • TS3048 turned off my desktop mac, now both my mouse and keyboard are not connected. i am not logged in yet as well, dont know what to do ?

    turned off my desktop mac, now both my mouse and keyboard are not connected. i am not logged in yet as well, dont know what to do ?

    Try resetting the SMC (no peripherals required).
    Barry

  • After reinstall my magic mouse and keyboard are not working properly

    so i've had various problems with my mac so did a clean reinstall, now my magic mouse wont scroll and my the f buttons on my wireless keyboard don't work ie volume buttons, i've checked the system preferences and all is well there, any ideas????
    i have a 2008 24' imac

    Hi
    It is not easy to say much about this issue.
    Do you use wireless devices? Are batteries OK?
    Have you noticed the same problem using other USB devices?
    I presume both devices uses USB port on your notebook.

  • G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help!

    G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help! Pressed pmu button already,  nothing ,..  Ppc g4 Mac

    Should I check the memory cards themselves? Reseat them?
    Yes.
    Memtest X or Rember to test the RAM.
    Reseat is also good.
    The iPhone 4 doesn't like USB 1.1 much.
    after the update the computer was working well, except for this freeze when ever I connect iPhone.
    I'd try USB 2.0 PCI. That's how I connect my iPhone 4s, and have connected all iPhones and iPods, to my G4.
    Never an issue.
    Can't say the same for USB 1.1.......
    The above (previous post) linked PCI card is cheap enough.
    Want cheaper, try this:
    http://www.amazon.com/Protronix®-5-Port-Controller-Card-Chipset/dp/B005JE2U82/re f=sr_1_2?ie=UTF8&qid=1337472141&sr=8-2
    The NEC chipset is the desired chipset, regardless of what OS the maker says is compatible.
    OS X has native NEC chipset USB support.

  • I am new to iMovies.  When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch.  Very annoying.  How can I fix this?

    I am new to iMovies.  When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch.  Very annoying.  How can I fix this?

    DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.

  • How can i fix a clip when the video and audio are not matching up?

    How can i fix a clip when the video and audio are not matching up? I imported the video from a junkdrive in a .VOB format and concerted to a .mov the videos were filmed on a miniDVD recorder.

    I would try detaching the audio and the dragging the audio to the left or right until it lines up.

  • Can computer expert retrieve deleted videos and photo from and iphone 4 which the photos and video are not sync before? is there any tools or software to retrieve it?

    can computer expert retrieve deleted videos and photo from and iphone 4 which the photos and video are not sync before? Are there any tools or software to retrieve it?

    kimberlyq wrote:
    That means it is possible for sure there is a chance to retrieve back those photos and video.
    No, there are no gurantees. The capabilitty exists to retrive deleted data from an iPhone, but like many things in life it is not 100% successful all the time. Be careful, there are a lot of scam artists out there. They take your money & retrive nothing. This guy is one of the best in the business, but he does not work for people in the private sector. Perhaps he can recommend a service to you. But, as already pointed out, you're looking at thousands of dollars out of pocket whether these folks are successful or not:
    http://www.zdziarski.com/blog/

  • Where are the mouse and keyboard settings stored

    I reinstalled the OS, and cleared the PRAM and NVRAM. The Mac still recognises the Apple bluetooth mouse and keyboard. How do I reset them?
    thanks

    Hi alienvoord-
    Some of the settings are stored in NVRAM.
    Have you tried pulling the batteries out of the mouse and keyboard for a few minutes and see if that does it?
    Are you trying to un-pair devices? Why not just delete them in the BlueTooth preferences?
    Luck-
    -DaddyPaycheck

  • The Examples They Show Are not for my computer I Need instructions For A Windows Computer HP TouchSmart

    The Examples They Show Are not for my computer I Need instructions For A Windows Computer HP TouchSmart

    hp
    The answers are in the details, and you have not given us enough details to help you.
    Right now I am guessing at what you seek. Are you trying to use your HP Touch Screen to do your
    Premiere Elements importing, editing, and exporting and the Touch Screen movements are not working
    to do what you want to do in Premiere Elements?
    Have you configured the HP computer Touch Screen? Using the Touch Screen, what cannot you do
    that you can do with the mouse?
    HP Support document - HP Support Center
    If I am guessing correctly here, does the mouse work instead of the Touch Screen to allow you to
    work in the program.
    I suspect that Premiere Elements does not support Touch Screen and you will end up using a mouse, but I would need to do more homework on
    that.
    This is not Adobe. Rather user to user. If you are dealing with the current version, 13, you might want to contact
    Adobe about the matter. More on that later, once you confirm the above or let me know that I have completely
    misinterpreted your question/concern.
    ATR

  • I installed Firefox 4 and the Orange App button plus the reload and stop are not showing

    I installed Firefox 4 and the Orange App button plus the reload and stop are not showing.

    You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden, so you need to hide the Menu bar to get the new appearance.<br />
    If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.<br />
    You can also place the Tab Bar on top.
    * View > Toolbars : [ ] Menu Bar
    * View > Toolbars : [X] Tabs on Top
    Firefox 4 uses a combined Stop/Reload/Go button that is positioned at the right end of the location bar.<br />
    During the page load process it shows as a Stop button and after the loading has finished the button is changed to a Reload button.<br />
    If you type in the location bar then that button becomes a Go button.<br />
    You can middle-click that Reload button to duplicate the current tab to a new tab.
    To move the Stop and Reload buttons to their position to the left of the location bar you can use these steps:
    * Open the "View > Toolbars > Customize" window to move the Stop and Reload button out of the location bar.
    * Drag the Reload and Stop buttons to their previous position to the left of the location bar.
    * Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
    * Set the order to "Stop - Reload" or separate them otherwise to get two distinct buttons.

  • Touchsmart 520-1047c Mouse and Keyboard will not work after sleep mode

    I have an issue which I need some help with. When my computer goes to sleep the wireless mouse and keyboard will not work unless I restart, however each one will wake the system up but will not operate after that. I have tried just making the display go to sleep, both go to sleep but that makes no difference same issue occurs. The only work around I have found is going into the power settings and turning the sleep mode off for booth the computer and display. This does not solve the problem it just masks it. New batteries, unplugged and replugged the dongle, updated the bios and all drivers. Don't know what else to try. Anybody know how to fix this? Thank you in advance for your help.

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that the mouse and keyboard on your desktop computer does not work if your computer enters sleep mode, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). This should help enable your system to wake from sleep mode using your wireless keyboard and mouse. I also recommend connecting wired peripherals to diagnose the functionality of your keyboard and mouse. If your system is still not able to wake from sleep mode, please follow the steps below to restore the default power schemes on your computer: Step 1. Click the Start button
    Step 2. In the search box, type "Command Prompt"
    Step 3. Right-click Command PromptStep 4. Click Run as administrator
    Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter  reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards  

  • How to fix the mouse and keyboard freezing when installing Windows 7 on 27' iMac late 2013?

    Hi, I have a question for u guys who can solve this.
    I recently bought the new 27' iMac late 2013, and I installed some softwares and used it for few days.
    Before I bought this I used the 15' Macbook Pro Retina, I installed Windows 7 Home Premium 64 bit, and I used the Windows for gaming.
    So back to my question.
    So I bought the new iMac and I was tying to install Windows 7 Home Premium 64 bit (with the same CD).
    After dividing the partition, and other stuff, the iMac rebooted and I hold down the option (alt) key. I choose the Windows CD, and it said it is "getting ready to install Windows". I let it load, and the blue screen where you choose the language, time/location and keyboard input popped up. At the bottom right corner (at the same page), there is a button that said "Next (N)" which u need to click it to go to the next step. I was moving my mouse to click the button, but I realized that my mouse and keyboard was frozen. I tried both wireless and wired mouse and keyboard but they didn't work. There was nothing I could do. I hold the power button, (that was the only option) and tried my mouse and keyboard on Mac OS and it worked fine.
    I thought something went wrong in the CD so I bought the Windows 7 Ultimate 64 bit. The result was same. It frizzed again. (I just wast few hundred $)
    Latter my friend lend me his Windows 8.1 Pro 64 bit. I tried it, and it worked, it didn't freezed on Windows 8.
    The problem is I played Battlefield 4, Titan fall, and Watch Dogs, and Battlefield 4 multiplayer doesn't work on Windows 8.1. Even though when it works on Windows 8, I prefer using Windows 7.
    Dose anyone knows how to fix this freezing thing?
    My computer is:
    27' iMac late 2013 (bought it just few days ago)
    I did no upgrades when I bought it, except the graphic card.
    I bought the iMac in Korean Apple Store, and my Windows CD is in Korean, can that be a problem?
    Please leave a comment when u think u can solve my problem.

    See -> http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf.
    In addition to the Windows disc (or USB flash drive with the Windows installer) you'll need a 8GB+ flash drive.
    The referenced manual - on page 3, I think, gives you a run-down of what you'll need before you begin the installation. You may also want to post any further Boot Camp questions in the Boot Camp forum -> https://discussions.apple.com/community/windows_software/boot_camp.
    Good luck,
    Clinton

  • Bluetooth Mouse and keyboard STILL Not working can someone help me?

    i have an apple Bluetooth Keyboard and wireles mighty mouse. Since i have installed leopard months ago it was working fine but then my mouse and keyboard stopped pairing with my Powerbook it recognises the devices but the refuse to pair i changed the batteries and installed the software that cam ith the keyboard and mouse and still nothing works.
    Can someone help me please

    After updating to 10.5.2 I am still experiencing problems with my Apple wireless mouse and keyboard. This is a Leopard issue ( here is just one blog on the topic
    http://aralbalkan.com/1086 ) in 2005 I purchased a Mac Mini which I love and never experienced a Bluetooth problem till I installed Leopard several months ago, now at least once a week, on average 2-3 times a week, I loose connection with the keyboard or the mouse and it takes awhile to re-establish the connection. I was hoping the last upgrade would address this issue but no such luck.

  • Can not install windows 7 pro using boot camp as mouse and keyboard will not work Help please

    I have a new iMac and trying to install Windows 7 Pro using boot camp. I have reached the stage of starting to load windows from the DVD then discovered the mouse and the keyboards not working so I could not interact with windows installation.

    Open, if not so already, the Windows formatter. Identify the BC Windows partition. It will be the one listed with the proper size you created and/or will be labeled as a C: drive. Be careful you select the right one or you may be corrupting the entire drive.
    Format the partition as NTFS.

  • Captivate 4 - Use the mouse and keyboard at the same time.

    Hello, good people.
    There is a way, in C4, to use the mouse and the keyboard at the same time?
    An example, in software simulation:
    "Hold the Shift key and click with the mouse in the other object to select it too..."

    Hi all
    I also understand the need for such a feature. Not saying I need it myself, but that I do understand it.
    What really needs to happen here is for everyone else that would need to use such a feature to request it from the Adobe Captivate Development team. See, the thing is, it's like a big election system. The more folks that request a specific feature, the higher it ranks on the Adobe development radar.
    So anyone that wants to see this feature should request it using the link below.
    Click here to visit the Wish Form/Bug Reporting Form
    Cheers... Rick
    Click here for Adobe Certified Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

Maybe you are looking for