TS3048 My magic mouse wont work :(

My magic mouse is turned on and the batteries are new. but no matter what I do my mouse won't show up on my macbook pro's bluetooth or mouse settings someone help me with this...

all i had to do was restart the Computer and all worked fine.

Similar Messages

  • Scrolling and rightclicking with magic mouse doesnt  work anymore

    Suddenly scrolling and rightclicking with magic mouse doesnt work any more. Left clicking and cursor moving works normal. I have checked the system preferences for the mouse and find nothing strange or unchecked. Any ideas?

    Also tried the universal access thing. Doesnt work.

  • Magic mouse not working in mountain lion

    magic mouse not working in mountain lion....What can I do?

    Have you tried a fresh set of Alkaline Batteries?
    Was  it ever paired to another divice?

  • Magic Mouse Not Working with Boot Camp.

    Hi All,
    I have a wired issue here. I installed Windows XP on my iMac 27" using bootcamp and all worked fine till one day my Magic Mouse stopped working in Windows. Now the funny part is windows is able to detect my mouse and says that the device is working normally but the green light under my mouse is OFF. No matter what i try i cannot get it to come on. But the moment i boot to Mac OS X the mouse works perfectly fine. My Apple Wireless KB works just fine in Windows. A USB mouse also works fine. I have also installed Parallels on my Mac and when i boot into the Windows partition using Parallels the Magic Mouse works fine. Any idea as to whats going on here.?
    John.

    I have a new (July 2009) iMac24 and neither the wireless mighty mouse nor keyboard work with Boot Camp XP Home Edition SP3. They install OK with the Bluetooth control panel, but then after five or ten seconds, drop out of the control panel and have to be discovered again. I spent two hours today with a Mac support expert, but no joy. We both gave up. It seems the wireless mouse/keyboard does not work with Boot Camp. If anyone hears of a solution, please let me know.

  • HT2845 can't get my apple magic mouse to work on my boot camp on my early 2011 macbook pro with latest Marveric OS

    I can't get my apple magic mouse to work on my boot camp,running Windows 7 Ultimate on my early 2011 macbook pro with latest Marveric OS........ It works perfectly on the Apple ,

    Not sure if this will help anyone, but I had trouble installing on 10.8.
    I then found this particular support page:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4142&lc=en&cc=us&dlc=en&s w_lang=&product=4231205#N228
    Be patient with the download, it takes some time ... When it has downloaded, follow the install instructions. It works well.
    I use the printer through usb but my wife uses wireless from her PC laptop.
    Andre Francis

  • HT1153 I turned my macbook off maanually last night.  Magic mouse was working fine.  When I turned ir back on the mouse did not work.  I do not have the option of Bluetooth in my system preferences.  I have no  idea how to resolve this problem.

    I turned my macbook off manually last night.  Magic mouse was working fine.  When I turned it back on it wasn't working.  I have no option in system preferences for Bluetooth.  I have no clue how to get it working again.  The batteries in the mouse are working fine.

    Try resetting the SMC.
    Barry

  • Keyboard and mouse wont work unless booted in safe mode.

    So my keyboard and mouse wont work at all when i start up normally, so i coudnt even log on, then i tried safe mode and i was able to use the mouse and keyboard and log in, then when i loged in i got some messages:
    *+System extention cannot be used+*
    +The system extention "/system/library/extentions/IOUSBFamily.Kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the products vendor for an update.+
    And 2 others: MicrosoftMouse.kext and msdosfs.kext
    Im pretty sure how i got this problem, i was using bootcamp and i got this program called MacDrive (bad Idea)and it corrupted my HD or something so i had to use disk warrior to fix it. I also used disk utility in safe mode but there were no errors it said.
    and this is probably a hardware problem but i cant use DVD's anymore, my drive will only read CD's now, must be broken....
    so ya, i dunno what to do exept get my drive fixed and to a backup and reinstall OS...

    Hi
    There are no many options which could solve this problem.
    It can be a hardware problem or software related issue.
    Can you use the internal keyboard within the BIOS?
    Check this.
    If this would not be possible, I assume the hardware is faulty.
    Additionally I recommend testing the keyboard and touchpad using the factory settings.
    Recover the notebook and check if the keyboard would functions. Otherwise you will need an helps from an notebook technician in order to replace the keyboard and touchpad

  • Is there any way that the magic mouse might work on the iPad?

    I just got the iPad 3 and is there any way that the magic mouse can work alone or with the keyboard on it? If not, can the mouse work with a PC?

    tonefox wrote:
    The magic mouse can't be used with an iPad simply because Apple has chosen not to include support for it.
    Which is fair enough. Where are you going to put this mouse in order to use it with an iPad... you need a handy flat surface... oh, I know - the iPad screen. Much easier than moving your fingertip around it.
    You would put it the same place you put the wireless keyboard.
    In fact the existing keyboard support is one of the big reasons many of us would like to see mouse support added. You see the problem is that when you use a keyboard you have to reach up and over to tap the iPad screen. By Steve Jobs own admission* the arm tires quickly when you have to do this repeatedly. In this particular situation a mouse would be more ergonomically sound.
    There is also the issue of access for the disabled. Although iOS does have many accessibility option, at present none of them help those with severe spinal damage or certain amputees. Including mouse support means you could also use devices like the "suck and puff"... A mouth controlled joystick designed for people with these disabilities.
    * He was talking about touchscreens on notebook computers, but it's the same concept.

  • My magic mouse stops working on windows 7 (when i'am using it)

    Hi,
    My magic mouse stops working, when iam using it, when i tested it on my macbook it works fine, i have a Trust bluehtooth 3.0 USB adapter.
    so it stops working after 15 till 20 seconds an after 10 seconds it works fine again. is this the bootcamp that i have installed or what
    Thank

    Error "...Installer Database is Corrupt..." when you install Adobe Creative Suite 4 or point product

  • Trackpad or USB mouse wont work

    I am struggling with my Macbook pro. Its an early 2010 model. Just in the past couple days the mouse wont work. It just decides it does not want to click at all. Sometimes i can get the right click to work. If i restart with keyboard commands it is fine for about 10 min then does it again.  I thought it was the trackpad but it is performing fine.  I can feel and hear it depress and clilck properly but no action on the screen when it clicks. If i plugin a USB mouse i get the same problem.  I have reset PRAM, repaired permissions, done a hard drive verify and run the hardware test from install disk both easy and extended hardware test. And everything comes up as fine and the permissions repaired fine.
    A couple months ago this computer was acting really weird and i decided to reformat with a fresh system since it had been over a year since i got it. It was a struggle to do even that. It would not install the system after a basic HD erase (which has never happened to me).  I had to zero out the HD to get the system to install.  It worked fine after i finally got it reinstalled and setup until now this mouse thing is happening
    I am just wondering if this seems more like system corruption or a hardware issue like bad HD or bad board.  I am about to reformat again but I hate to go through all that setup again if it is hardware. Anyone have any thoughts on what to try next. Thanks

    The regression reported here http://marc.info/?l=linux-usb&m=137523956310060&w=2 did not solve the problem as i installed the patch found here https://bugs.archlinux.org/task/36296
    Still the same message shown in the xorg log.
    EDIT:
    Also, after being connected the mouse connects as a keyboard, but the actuall mouse functionality dosnt work.
    Last edited by Foxboron (2013-08-12 09:08:39)

  • TS1986 My mouse wont work...

    My mouse wont work and it is a cordless type.  I've replaced the batteries and the green light comes on underneath but the arrow wont move on the screen.  Can anyone help?

    Is this something new, or something that worked before and no longer works?
    What is the make and model of the mouse?  (maybe a link to its product desription page if available)
    What is your Mac model, and what version of Mac OS X does it run?
    If it's a non-Apple wireless mouse, you may need to install a driver to make it work.

  • Magic Mouse stops working under Yosemite

    Since upgrading to Yosemite, I've been experiencing an issue where occasionally the Magic Mouse stops working.  I sit there and turn it off, turn it back on, sit there and click the mouse and move it around, but it doesn't connect to the computer.  I go into the Bluetooth Preferences and unpair it, but it doesn't show up on the list of devices and so I can't re-pair it.  Turning the Bluetooth off and then back on doesn't make it show up.  So far, the only thing that seems to help is to restart the computer completely.
    Has anyone else been experiencing this problem?

    My Mac Mini's power button changed functionality with Mavericks.  Now with a fast click of the power button the Mini sleeps.  A little longer and you get a shut down dialog, and of course, hard shutdown holding for longer still.  I don't know if the MacBook works like that in Yosemite.  If it does, use the button to Sleep, then again to wake, and 99% of the time you have a Magic Mouse again, with Mavericks at least.  Even if the button doesn't work, you can use control-fn-F2 to give the Apple Menu focus, down arrow to go down to Sleep, and Enter to make it happen.  Then wake however you normally do.  Still a nuisance, but slightly less intrusive than Restart, particularly if you have something you haven't saved yet. Worth a try maybe.
    I only boot Yosemite for short periods from an external drive so far, so I can't vouch that this will work for it.  I come from a background where you don't install version zero of anything.  I have to say, with a clean install, so far I don't see the problems I read about here.  Maybe I need to work for a whole day with Yosemite sometime.
    PS. I just tried turning off the mouse in Yosemite (and saw the disconnection reported).  Went to Sleep.  Turned on the mouse while Sleeping, Woke Up, and the  Magic Mouse reconnected just like Startup.

  • My magic mouse stopped working.

    My magic mouse stopped working. I thought it was the battery, changed them, but it keeps telling me the mouse is not discoverable. It’s turned on, but just will not do anything. Any suggestions?

    Hi Susan,
    I would still clean the battery terminals and the contacts inside the compartment.
    Also, shake the mouse a little, see if there is any rattle.   The batteries could be loose.   If they are not Apple, Duracell or Energiser, that may well be the case.

  • Magic Mouse only works with Mobee Rechargeable

    I have had a Magic Mouse for years. I don't recall how long. A couple of years ago I bought the Mobee Magic Charger and have mostly been happy with it. However, lately I cannot get my Magic Mouse to work with anything BUT the Mobee rechargeable unit. Normal batteries won't turn it on.
    Anyone have ideas of what could be wrong?

    After the initial full charge of the battery pack I get nothing. The green light is steady. However, when I power on the magic mouse and try to pair it with my iMac, it never connects. Also, the green light on the mouse itself is no longer lighting up.
    Does it not blink when you flip the switch off then on?
    Some people have complained about not being able to re-pair after a battery change.  Smc and/or pram reset might help here but don't bother since you apparently have a bigger problem to solve.
    And if that weren't enough, the battery pack is stuck and I cannot remove it from the mouse. The mouse was working just perfectly when I was using the AA alkaline batteries. Am I missing something? Or is this a defect in the product?
    Defect in the battery pack perhaps.  I would call Mobee and ask them for their opinion.  Maybe the batteries were defective and swelled in the case (just guessing).

  • TS3048 Magic mouse not working.

    My magic mouse is paired and connected to my mac it has fresh batteries that are showing 100% on the mac yet it is not actually working can someone help please?

    Hello:
    Try resetting the SMC (and PRAM, if you are able).
    Barry

Maybe you are looking for

  • How can I transfer a podcast feeds from one itunes account to another?

    For a couple of years we have been using a third party company to edit and submit our podcast feeds to itunes. They have been doing this using their own itunes account. After changing things round a little, I have now created an itunes account for ou

  • Here's what you do activate the iPhone if you had a BlackBerry

    I had luck activating my phone after a 25-hour wait!! Finally. Doomay, thank you for posting this number. Ok, this is what I did. Called 1 877 800 3701 Spoke to a representative. She was very helpful. Tried everything and eventually realized that the

  • Installing 11gR1 CRS and receive error when executing root.sh on 2nd node of 2 node cluster

    This is the error from the execution of root.sh on 2nd node of 2 node RAC cluster: dhzusbx98: /u01/app/crs # ./root.sh WARNING: directory '/u01/app' is not owned by root Checking to see if Oracle CRS stack is already configured /etc/oracle does not e

  • Error handling in master detail form

    Hi Guys, Apex 4.2.1 I use the custum error handling of apex to customize the errror message. I add a row in the detail form with a dupicate key which is handled by the error function after submiiting the master record the error message is correct dis

  • Error in Subquery in BIP11g

    We have a Query in BIP11g and it fails on this:       WHERE S.STUDENTNUMMER = SE.STUDENTNUMMER      AND SE.OPLEIDING = O.OPLEIDING      AND SI.OPLEIDING = O.OPLEIDING AND NVL(:P_COLLEGEJAAR,12) IN ( SELECT NVL( :P_COLLEGEJAAR,12) JAAR FROM OST_STUDEN