TS3048 Number pad on extended keyboard stopped working after updating to OSX 10.9.1. Testing keyboard on old system still works perfectly.

Expanded keyboard stopped working correctly after updating my system from OSX 10.8.6 to OSX 10.9.1 and now 10.9.2. The keypad numbers do not work although the numbers along the top of the keyboard work fine. Moving the keyboard back to computer still using 10.8.6 and it works fine.

See if zapping the PRAM works. Check out KB Article: http://support.apple.com/kb/HT1379 Resetting your Mac's PRAM and NVRAM

Similar Messages

Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick

After upgrading to Maverick OSX on the iMac printing from CS5 via Epson R3880 is not working correctly. In Print Settings menu the drop downs for Colour and Colour Settings are greyed out. I already re-installed PS and installed the new drivers from epson. Any ideas?

but after choosing PS manages color, the options in the print menu for choosing color (color or b&W) and color settings are not available anymore. They used to be the last three years I printed with photoshop/epson 3880.
Instead they are greyed out now.
attached screenshot:
Op 30 mei 2014, om 01:47 heeft Chris Cox <[email protected]> het volgende geschreven:
Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
created by Chris Cox in Photoshop General Discussion - View the full discussion
If Photoshop managed color, then the controls in the printer driver are supposed to be grayed out - that's how Apple specifies drivers to work (because only one party should be managing the print color).
So what you're describing is perfectly normal.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6420209#6420209
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

My apps don't work/after update/4th/ did up dates yesterday, now none of my apps are working. When click on them my screen blicks

When I did updates last night about videos. Now non of my apps are working. When I click on them the screen blicks on and off. Everything else see fine.

- Have you tried to reset yur iPod?
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
-Next would be to restore the iPod from backup via iTunes
- Last would be to restore you iPod to factory defaults/new iPod via iTunes since there may be corruption that is in your backup.

SOLVED Spanish keyboard stopped loading after update, upgrade

I am trying archlinux. The newest stable version with updates, and kde 4.3.2. Brilliant it is. However, after a few weeks of perfect use today I booted up and found, I think, US keyboard instead of Spanish one. Apart from a standard update and upgrade, I do not think I have changed anything.
I tried system settings and chose regional and language/keyboard layout. It gives me an error message only. Cannot cut and paste but it sayd something like> Cannot load /usr/lib/kde4/kcm_keyboard_layout.so (libxklavier.so.12. Cannot open shared object file. No such file or directory) Cannot load library.
I check for first file and it shows it is there>
[root@antec etc]# find / -name kcm_keyboard*
/usr/lib/kde4/kcm_keyboard.so
/usr/lib/kde4/kcm_keyboard_layout.so
/usr/share/kde4/services/kcm_keyboard.desktop
So is second file but see it is number 15 not number 12 as said in error message above>
[root@antec etc]# find / -name libxklav*
/usr/lib/pkgconfig/libxklavier.pc
/usr/lib/libxklavier.so.15
/usr/lib/libxklavier.so
/usr/lib/libxklavier.so.15.0.0
/usr/share/gtk-doc/html/libxklavier
/usr/share/gtk-doc/html/libxklavier/libxklavier.devhelp
/usr/share/gtk-doc/html/libxklavier/libxklavier.devhelp2
/usr/share/gtk-doc/html/libxklavier/libxklavier-xklavier.html
/usr/include/libxklavier
/var/lib/pacman/local/libxklavier-4.0-1
/var/lib/pacman/sync/extra/libxklavier-4.0-1
/var/cache/pacman/pkg/libxklavier-3.9-2-i686.pkg.tar.gz
/var/cache/pacman/pkg/libxklavier-4.0-1-i686.pkg.tar.gz
[root@antec etc]#
I check in rc.conf and the es keyboard is selected. I search in the archlinux wiki and in google and also here but do not find help.
EDIT> now also found that Printer Config in Settings also shows similar error messages about orphan modules, old third party models etc.
Can you help please....
Last edited by arjay (2009-10-31 11:49:10)

Very kind of you to reply.
The results of your first request is>
linux-gate.so.1 => (0xb77cd000)
libxklavier.so.12 => not found
libgobject-2.0.so.0 => /usr/lib/libgobject-2.0.so.0 (0xb7745000)
libX11.so.6 => /usr/lib/libX11.so.6 (0xb7629000)
libXi.so.6 => /usr/lib/libXi.so.6 (0xb7620000)
libkdeui.so.5 => /usr/lib/libkdeui.so.5 (0xb7244000)
libkdecore.so.5 => /usr/lib/libkdecore.so.5 (0xb6fcb000)
libQtCore.so.4 => /usr/lib/libQtCore.so.4 (0xb6d9c000)
libQtGui.so.4 => /usr/lib/libQtGui.so.4 (0xb640b000)
libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0xb6319000)
libc.so.6 => /lib/libc.so.6 (0xb61d3000)
libgcc_s.so.1 => /usr/lib/libgcc_s.so.1 (0xb61b4000)
libglib-2.0.so.0 => /usr/lib/libglib-2.0.so.0 (0xb6102000)
libpcre.so.0 => /lib/libpcre.so.0 (0xb60d1000)
libxcb.so.1 => /usr/lib/libxcb.so.1 (0xb60b8000)
libdl.so.2 => /lib/libdl.so.2 (0xb60b4000)
libXext.so.6 => /usr/lib/libXext.so.6 (0xb60a4000)
libQtSvg.so.4 => /usr/lib/libQtSvg.so.4 (0xb6051000)
libpthread.so.0 => /lib/libpthread.so.0 (0xb6038000)
libSM.so.6 => /usr/lib/libSM.so.6 (0xb6030000)
libICE.so.6 => /usr/lib/libICE.so.6 (0xb6019000)
libQtXml.so.4 => /usr/lib/libQtXml.so.4 (0xb5fd6000)
libXtst.so.6 => /usr/lib/libXtst.so.6 (0xb5fd0000)
libXcursor.so.1 => /usr/lib/libXcursor.so.1 (0xb5fc7000)
libXfixes.so.3 => /usr/lib/libXfixes.so.3 (0xb5fc2000)
libXrender.so.1 => /usr/lib/libXrender.so.1 (0xb5fb9000)
libQtDBus.so.4 => /usr/lib/libQtDBus.so.4 (0xb5f49000)
libm.so.6 => /lib/libm.so.6 (0xb5f23000)
libQtNetwork.so.4 => /usr/lib/libQtNetwork.so.4 (0xb5e14000)
libz.so.1 => /usr/lib/libz.so.1 (0xb5e00000)
libbz2.so.1.0 => /lib/libbz2.so.1.0 (0xb5df0000)
liblzma.so.0 => /usr/lib/liblzma.so.0 (0xb5dcf000)
libgthread-2.0.so.0 => /usr/lib/libgthread-2.0.so.0 (0xb5dcb000)
librt.so.1 => /lib/librt.so.1 (0xb5dc1000)
libpng12.so.0 => /usr/lib/libpng12.so.0 (0xb5d9b000)
libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0xb5d16000)
libfontconfig.so.1 => /usr/lib/libfontconfig.so.1 (0xb5ceb000)
/lib/ld-linux.so.2 (0xb77ce000)
libXau.so.6 => /usr/lib/libXau.so.6 (0xb5ce8000)
libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0xb5ce2000)
libuuid.so.1 => /lib/libuuid.so.1 (0xb5cde000)
libssl.so.0.9.8 => /usr/lib/libssl.so.0.9.8 (0xb5c98000)
libcrypto.so.0.9.8 => /usr/lib/libcrypto.so.0.9.8 (0xb5b46000)
libexpat.so.1 => /usr/lib/libexpat.so.1 (0xb5b1f000)
[richard@antec ~]$
And the second>
[root@antec richard]# ls -l /usr/lib/libxklavier.so*
lrwxrwxrwx 1 root root 21 2009-08-23 22:28 /usr/lib/libxklavier.so -> libxklavier.so.15.0.0
lrwxrwxrwx 1 root root 21 2009-08-23 22:28 /usr/lib/libxklavier.so.15 -> libxklavier.so.15.0.0
-rwxr-xr-x 1 root root 115321 2009-08-23 22:28 /usr/lib/libxklavier.so.15.0.0
[root@antec richard]#
As you suspected, libxklavier.so.15 is there, but not so.12 which is presumably what kde is looking for_
The question is, how do I correct this
Richard
BTW thanks for the tip about locate. I used to use this ages ago but got out of the habit. Not sure why. Maybe the distro I had back then did not have it by default and I needed it quickly one day. It could not be that I was too lazy to install it I am sure

Widget doesn't work after updating to OSX 10.6.8

After installing the latest batch of updates, my sudoku widget doesn't work anymore. Anyone else having a problem like this, or know how to fix it?
I noticed on the website which created it that others are also having this problem in the last few days:
http://briandeboer.com/posts/sudoku-20-approaching-beta-status/
Thanks!

Someone posted the following on the Sudoku widget website:
"Just wanted to add to my previous post. This widget uses images “.png” files so the font issue has not affected it’s performance. After some digging I found WebKit2 was bundled with the latest Safari update (5.1 and 5.0.6). WebKit2 uses a whole bunch of new APIs rendering some old ones obsolete. My guess is as good as yours, but most likely the SudokuC controller inside the widget is referring to one of those obsolete APIs."
Does anyone know what this means, and can explain it to someone, like myself, who is not a programmer?
Also, does it seem like a relevant solution and/or cause of the problem?
Thanks!

Wifi doesnt work after updating to OSX 10.10.2 :( HELP PLZ ?

Hello,i have recently update Mac from OS x 10.10.1 to os x 10.10.2 , unfortunately after installing this update wifi wont work anymore though it shows that its connected to the network but when i open the browser and try to surf the net nothing happen and it doesn't load anything : ( though when i enter to the safe mode wifi works just fine * any suggestions ? Help please : ( * P.S i have Macbook air 2014 , 13inch , 256Gb

Wi-Fi Problems in OS X Yosemite
Wi-Fi Problems in OS X Yosemite (2)
Wireless Diagnostics
Also try turning off Bluetooth.
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)

Disk Utilty does not work after update to OSX 10.8.4

I updated to OSX 10.8.4 on my Macbook pro and the update went smoothly.
However when I try to run Disk Utility the utility never starts and the right click menu says it is not responding. I have to force quit.

You would need to download and run again the OS X Mountain Lion Update v10.8.4 (Combo).
Go to: http://support.apple.com/kb/dl1659

After updating to the newest version of fire fox (my old version was working just fine) won't start now and I have no idea what to do I have unistalled and reinstalled but still when I click on the icon nothing happens please help

firefox won't start at all

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The hotness suggests a hardware problem
Apple Retail Store - Genius Bar

Keyboard shortcut command-w stopped working after upgrading to OSX 10.9.4

Dear all,
after upgrading to OSX 10.9.4 the keyboard shortcut command-w stops working after about 30 min of having the machine powered on. Interestingly, this phenomenon is not restricted to a certain app (Safari, etc.).
In system preferences > keyboard all settings have been set to "default".
Anybody else having the same issue?
Many thanks,
wolfgang

Hi folks,
just as quick documentation for possibly other error sources for the problem "shortcut command-w not working":
If problem persists close all applications (allL!). Then open one app like Safari, open several tabs and check whether command-w works.
Reason: it could happen that you've set command-w inadvertently in another app like Snagit. And when setting this the app did not tell you "listen dummy, this is a standard command, do you really want to replace a standard command with a app-specific command. Don't be surprised if it doesn't work when the app is running."
This is what happened to me. So close all apps and check whether problem persists.
reg,
wolfgang

TS3623 purchasing a movie from apple tv has stopped working. I click on "movies" and it takes me back to the same screen instead of the movies available. I have updated software, unplugged the modem & apple tv box, & the tv; Netflix still works!

purchasing a movie from apple tv has stopped working. I click on "movies" and it takes me back to the same screen instead of the movies available. I have updated software, unplugged the modem & apple tv box, & the tv; Netflix still works!

Welcome to the Apple Community.
First you should try logging out of your iTunes Store account (settings > iTunes Store > accounts) and then back in again.
If that doesn't help, try resetting the Apple TV (Settings > General > Reset > Reset all settings). You should also try restarting your router.
If both of the above don't help, you should try a restore (Settings > General > Reset > Restore).

Wifi iPad 3 charger stopped working after updating to iOS 6, help!

Wifi iPad 3 charger stopped working after updating to iOS 6. The little iPhone charger charges it very very slowly, but the charger gets really hot after a while. I restored it and everything works but the charger. It's only a few months old, should I try a new iPad wall charger block?

Hi,
I did this after reading the forums and it made no difference. it has actually charged from 14% to 67% but thats taken over 12 hours.
Will monitor it and if no joy will go to a apple store
Thanks

Earpiece stopped working after updating to 5.0.1.

It worked fine the night before. Then it stopped working after updating to 5.0.1. I can only hear calls on speaker. Did anyone else have this problem. I have tried all the fixes, restart, reboot, restore. No debris in the headphone jack, and when volume is turned up or down it doesn't show headphones on the screen. Nothing covering the earpiece. Tried to blow out headphone jack with compressed air. I'm thinking it is a glitch in the software. Using Iphone 4 on Verizon. Any thoughts or ideas?

you can try reading the posts listed to your right in the "More Like This" box or by searching this forum.

HT201371 Touch ID stopped working after updating to IOS 7.1.

Good morning to all,
My touch ID stopped working after updating to IOS 7.1.
It was working perfectly until the update and then it stopped recognizing my prints
I've reset the phone and deleted my fingerprints and now I can't even add a fingerprint again.
I am sure this is not a hardware problem since the phone was working perfectly before the update and it didn't fall nor anything similar.
Also the sensor is clean as well as my fingers.

Same problem... I think we all should let Apple know of this issue. http://www.apple.com/feedback/ tell them the probelm. So when they get too many complains they will surely fix it ASAP with a software update.

Marketplace widget does not work after update

Updated phone (Droid X) this morning (10-24-10). Seemed to go fine until I clicked on what was supposed to be the marketplace widget. It said something to the effect that the application was not installed. The usual Icon was replaced by a blue icon with the settings "cog" on the right side. Is there anyway to get the Marketplace widget back? By the way, it also does not show up in the application window or in the "Manage Applications" list. I have temporarily put a shortcut to the internet Marketplace on the home page.

This is a common issue after update.
There is only 2 ways I know that seem to work.
1. Reinstall app from a market backup apk (EStrong File Explorer works well)
2. Hard Reset on device.
Reset works but use the method here.... http://community.vzw.com/t5/DROID-X-by-Motorola/Minimize-Droid-X-Issues-After-Froyo-Update/m-p/296586#M11211 or
Follow these settings during restore to avoid issues being restored automatically.
1. Go to homepage on device
2. Click left menu hard button
3. Select Settings from list (Bottom Right of Screen)
4. Scroll to "Privacy" in list
5. Select "Privacy"
6. Uncheck "Automatic Restore" and then "Back up my data" under Settings/Privacy
7. Click OK on the menu that pops up that says "Are you sure you want to stop bacing up your settings andapplication data and erase all copies on Google server?"
8. Click Factory Data Reset
9. Click Reset Phone
10. After reset is complete follow step to setup but do not input Google Email information
11. Once phone is at homepage go back into Settings/Privacy and make sure the Automatic Restore option is unchecked, even if grayed out, activate "Back up my data" and quickly disable "Automatic Restore"
5. After being sure that the Automatic Restore option is off it will be safe to log into Google by going to My Accounts and press New account button at bottom and input email account information.
This process will stop all applications and settings from restoring automatically and restoring original issues that usually resolve a number of issues.

Airport Express b/g no longer working after update to Airport Utility 5.3.1

after updating to this the other day, my AE b/g no longer works - like many others on the forum, i get the flashing amber / yellow blinkie light situation. i can hard reset it and get it to initially show up in AU 5.3.1, but once i try to join it to my wireless network (i use it with my laser printer) it never takes, disappears from AU, and sits there flashing relentlessly.
seems pretty clear that it's related to the 5.3.1 update - it was working fine for nearly 2 years without any issues prior to this. i find it hard to believe it had a total failure related to this - in fact, i just finally updated yesterday after being asked to for 2 weeks, and that's when it stopped working, no question about it.
any ideas on getting it to work? i've tried everything on these forums to no avail. or am i stuck waiting on AU 5.3.2?

I just solved the same issue. First I reset my whole network from scratch by hard resetting all devices (1 AEBS N and two AXg). Then I started configuring my main base station and added the other devices to the network one by one. (I have a WDS). Only after setting all the devices to channel 6, did the green light stay on.
Apparently when you configure a AX to participate in an existing WDS network and you enter the existing network name in the configuration panel of Airport Utility, it creates a separate network with the same name. In order to force it to join the existing network, make sure their Airport ID numbers are entered under the WDS tab in Airport as WDS remotes.
Check this thread for the details: http://discussions.apple.com/thread.jspa?threadID=1440997

TS3048 Number pad on extended keyboard stopped working after updating to OSX 10.9.1. Testing keyboard on old system still works perfectly.

Similar Messages

Maybe you are looking for