TS3048 Original wireless keyboard is not recognized from mini/lion

Magic mouse is working with newly installed Lion, but while the original wireless keyboard is recognized the Mini fails to connect to it.  The keyboard was originally installed with Leopard.

Both replies were helpful. I've not joined this support group before and didn't navigate very well. I marked that both comments were helpful. I thought I could provide more than 1 feedback for each (wrong) and should have indicated that icrouton corrected the problem. I SHOULD have recalled from set up (although a friend set up the computer this time - usually, I have done so historically) that there is an on/off on the keyboard. Icrouton's comment mentioned it, so I looked again -I found it and clicked it. Now, things seem fine. It is discretely located and I don't see how I could have accidentally turned it off, but, at any rate, thanks to both of you for very helpful information and VERY promptly submitted, too.

Similar Messages

  • TS3048 My wireless keyboard does not turn on. Yes batteries are new and installed correctly

    I don't know why my wireless keyboard is not working. I can't sign onto my computer.  Installed new batteries and yes they are installed correctly.  I'm wondering if maybe it doesn't work anymore. It's only a couple of years old!

    Hi, Mike.  
    Thank you for visiting Apple Support Communities.  
    I understand that your keyboard is not functioning.  Here is a troubleshooting article that I would recommend going through for this.  
    Troubleshooting wireless mouse and keyboard issues
    -Jason H.  

  • Caps lock and shift not recognized from a usb or virtual keyboard on the Mac

    Caps lock and shift not recognized from a usb or virtual keyboard on the Mac client.   You have to use the native keyboard or bluetooth keyboard.

    Hi,
    nswint, it seems that we have to do as you described.
    Corey, I have the remote desktop client installed on a iPad Air, I can input capital letters via the on-screen keyboard within the remote desktop session that we can activate by a tap on the keyboard icon in the connection bar.
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • Wireless keyboard does not work after waking up from idle

    After MacBook Air went to sleep, wireless keyboard does not properly connect to MacBook - I can wake the MacBook up, but meaningless numbers are sent, and I cannot type in my password. Have to "open" MacBook, and use keys - disconnect and re-connect wireless keyboard. I also use Magic Mouse and it works flawlessly. Problem is small but annoying. Any help?

    After MacBook Air went to sleep, wireless keyboard does not properly connect to MacBook - I can wake the MacBook up, but meaningless numbers are sent, and I cannot type in my password. Have to "open" MacBook, and use keys - disconnect and re-connect wireless keyboard. I also use Magic Mouse and it works flawlessly. Problem is small but annoying. Any help?

  • TS3048 My left and right arrow on my wireless keyboard is not working.  It does not highlight in the keyboard viewer.  What's next?

    My left and right arrow on my wireless keyboard are not working.  I've looked at the keyboard viewer and see that they do not highlight.  What do I do now?

    Hello:
    Try resetting the PRAM.
    Barry

  • Wireless keyboard will not pair with computer. Unable to submit password.

    My wireless keyboard will not pair with the computer. Now I am unable to submit the password in order to access the computer.

    What version of the Mac OS are you running (from "About this Mac" under your Apple menu)?

  • Wireless Keyboard Will Not Pair With iMac

    After installing Security Update 2007-007 and Pro Applicatiion Support 4.0.1 my wireless keyboard stopped being recognized by my computer. When I run my Bluetooth Setup Assistant it sees my keyboard but I can not pair it. I even installed new battteries in it thinking that was the problem. I had a brand new never used wireless keyboard in the closet which i got out and installed batteries in it and it will also not pair with my iMac. Any sugggestions will be greatly appreciated since I am stumped! Oh, my wireless mouse is working fine.

    The model number is M9270LL/A (its the one that comes with the iMac). When the screen comes up and asks for you to enter a set of numbers to pair with the computer and I type the nembers on the keyboard I then receive an message that an error has occured. I try and try again to pair the keyboard to the computer with the same results. Thanks.

  • HT3917 My apple wireless keyboard is not working after new batteries installed

    My apple wireless keyboard is not working after new batteries installed.

    Do you get a steady green light to say there is a connection.    If not, are the batteries the right way round.   Do you have a monitor to tell the batteries strength. Is there a reading.   Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

  • Windows 8.1 freeze on any hardware scan or changes. USB wireless keyboard mouse not working

    Problem : System Freezes frequently on any hardware scan or changes.
    Symptom : Wireless Keyboard Mouse not working.
    Caused by : VMkbd.sys located in C:\Windows\System32\drivers.
    Issue : VMware player or VMware Workstation installed on Windows 8.1 causes compatibility issue leading to system freeze
    Soultion : Please follow steps below
    Step 1: Start > run > regedit
    Step 2: Locate to this registry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e96b-e325-11ce-BFC1-08002BE10318}
    Step 3: On the left side plane, Right click on the registry {4d36e96b-e325-11ce-BFC1-08002BE10318} and then export it as backup. Just to be safe.
    Step 4: Edit the UpperFilters, The value current would be kdbclass vmkbd. Remove the vmkbd. So only value left would be kbdclass.
    Step 5: Restart your system and connect your USB wireless reciever. If all is well it will not freeze your windows now.
    This worked for me. Hope this works for you. Enjoy..!!

    Hi AshishSrivastava,
    Thank you for your sharing and update.
    Besides, I will change this thread type as discussion.
    Best regards
    Michael Shao
    TechNet Community Support

  • The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

    My first post to the Apple Support Community so it looks like all I wanted to know is covered in the title. The research I have done led me to solutions that I am not comfortable trying for fear of irreparably damaging my keyboard and/or Mac mini. Does anyone have a simpler solution? Please? Hellooooo?
    Just in case the title is too long to show, I have re-pasted here:
    The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

    BDAqua wrote:
    Hello & welcome to the Forums!
    I think Spark cured this for another person and the same problem...
    http://www.shadowlab.org/Software/spark.php
    http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele
    http://doublecommand.sourceforge.net/
    Thank you for the response. Unfortunately, I could not figure out how to work the above applications. I thought that i had managed to assign the appropriate function keys in Spark to their volume counterparts, but it had no effect. Below is a screen shot. Do you see anything amiss?

  • The letter "u" on my iMac's wireless keyboard is not working.

    The letter "u" on my iMac's wireless keyboard is not working. Does anyone know how to fix this? All the other key are working fine.

    I started a having problems with it a few days ago. It worked intermittently then.

  • The wireless keyboard is not working with my iPad2. I turned on Bluetooth and paired it.  What else is there to do?

    The wireless keyboard is not working with my iPad2.  I turned on bluetooth and paired the device.  What other hidden step is there to do?

    Well, the tiny green light comes on and blinks. . . After a frustrating time, I turned everything off.  Later, when I tried the keyboard again, it worked.  I guess the bluetooth process takes longer than expected.  So thank you for taking the time to help a technically impaired person!!

  • USB not recognized from my ipod touch 2nd gen on any of computers.

    USB not recognized from my ipod touch 2nd gen on any of computers.

    Just what are you doing where?
    Are you trying to sign into Settings>iTunes and App Store?

  • IPad and wireless keyboard do not pair any more

    I always had (minor) problems, wehn vonnecting iPad and keyboard. But now iPad and wireless keyboard do not pair at all. Tried 15-20 times, fresh batteries, switched on an off, tried manually - nothing. I noticed that the green LED of the keyboard shines just for about 3 seconds when I switch on - but this has always been like that before. Latest OS of course. Who can help, please?
    Lothar

    Hi Lothar,
    Thanks for visiting Apple Support Communities.
    You may find the troubleshooting tips in this article helpful if you are no longer able to pair your iPad with your wireless keyboard:
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    Best,
    Jeremy

  • HT1492 my wireless keyboard will not recognise Q-O and Z-M

    Hi my Wireless Keyboard does not recognise half the keys. I have gone through all the troubleshooting  basics but nothing has changed.
    It is the top row of letter Q-O (but P works) and the botton row Z-M.  any ideas?(I am using a wired keyboard right now!)
    Thanks

    Moderators can delete this post. (I don't see any option to edit or remove)
    ...I'm an idiot. My power supply wasn't connected properly. (the light was green, not red to indicate charging)
    Once I fixed that, everything is working properly.
    0 for 1 for Apple discussion forum topics!

Maybe you are looking for

  • Report Generation (MS Word)

    Is there a way to make the target MSWord document have landscape orientation? Thanks, Peter

  • Problem dysplayin list in visual compser with bapi_material_getlist

    Hi helpers, I'm currently trying to display the list of all the material I have using Bapi_material_getlist in visual composer. When I press the submit button, nothing appear in my table. I've read that you have  to turn MATNRLIST into an input and e

  • Inconsistent Files in XML Dynamic News Sample Application

    The files are on these following sites: http://otn.oracle.com/sample_code/tech/xml/xmlnews/Readme.html http://otn.oracle.com/sample_code/tech/xml/xmlnews/install.html The directory structure described in these 2 sites are not the same. Customer is st

  • Where do I get Lens Profile for lens correction in LR3

    I have LR3 and need help figuring something out. I mainly shoot with a Tamron 24-70mm. LR3 doesn't list this lens under the lens correction so I can't correct any of the lens distortion. Anyone know where/how I can locate/install this profile? Do I g

  • Howto to get the year timestamp in syslog and logadm files

    5.10 Generic_141414-10 sun4u sparc Howto to get the year timestamp in syslog and logadm We have to keep logs files for a long time, I was exploring logs in /var/adm/secure and noticed that log files over a year old did not have a year time stamp, the