TS3048 Printer/Scanner doesn't recognize my iMac

I have a Canon MX350 wifi printer that my MacAir recognizes but not my iMac. Both are on OS X 10.7.4  snow leopard. It's a pain to get anything printed right now - I have to grab everything through the MacAir since I can't print or scan directly from the iMac. What do I do?

say510 wrote:
I have a Canon MX350 wifi printer that my MacAir recognizes but not my iMac.
So in the iMac, when you open Print & Scan and select to add a printer, does the MX350 show as a Nearby Printer? If not and you click Add Printer or Scanner, the Default Add Printer window will appear. Does the MX show here?

Similar Messages

  • The finger print scanner doesn't work 90% of the time please help! I have tried everything.

    Dose any one else have problems with the iPhone 5s finger print scanner??
    I've tried rescanning, different fingers, scanning different ways. But 95% of the time it just won't work. It is soooo frustring!! I would have saved a bunch of $ and bought a 5 or 5c if I wanted a phone that didn't fingerprint scan. has any one got advice that can help? It would be appreciated. I do work with my hands ( manual labour) but it's not like I tear up my fingers every day. Any help would be appreciated.
    Peter.

    If any one is still reading this thread you would know that I've been having problems with my finger print scanner. Well it turns out that the issue is not with the 5s but with my fingers. My fingers are too big for the scanner, so if your having trouble with your scanner try using just the very tip of your finger. I did a lot of research on my issue and found nothing suggesting this. My brother had the idea that this might be the problem and turns out he was right. Since rescanning the tip of my finger I have 100% success rate and am very happy with my new phone. Thanks again for all the help I got from people on this issue.

  • Canon pixma mp560 printer/scanner doesn't work wirelessly

    I have a canon mp560 printer/scanner.  It works fine w/ my mac when I'm plugged in w/ the usb but then goes offline and won't print when I try to go wireless.  I've reinstalled the software and everything functions fine, but the printer and scanner will not run wirelessly.  I've tried the canon website and have not been able to solve the problem.  Does this have something to do w/ bonjour?  I'm relatively new to macs.  This printer runs wirelesly w/out problem on my pc.  Thanks for any help.

    Your problem is being caused by sharing this printer via USB. The UFR2 driver for Mac causes problems when being shared, even to other Mac's. Since the MF has an Ethernet port you would be better suited to buying an Ethernet hub and connecting all computers and the printer to this hub.
    As for the scanning, I don't believe there is a network scanning application for Mac. AFAIK the MF ScanGear for OS X is for USB only so you would need to have the MF connected to the Mac for scanning - unless it has a Send function which would allow you to send a scan to a shared folder on the Mac. But looking at the spec pages for this model I could not tell if it has this feature.

  • HOW DO I GET MY BROTHER PRINTER/SCANNER TO SCAN TO MY IMAC. IT WILL NO LONGER RECOGNIZE THE IMAC

    I have previously been able to scan from my MFC-J67100W to my iMac. It goes to "connecting to PC" and after a couple of minutes quits. Is there a scan option on the PC itself?

    I'd say use Image Capture (part of OS X) or VueScan http://www.hamrick.com/

  • Airport Extreme connects to Epson all in one printer, scanner doesn't work

    I got a new Airport Extreme to connect my all-in-one printer, copier, scanner Epson CX8400. Connecting the printer feature to my MacBook Pro and my HP laptop was very easy, however can't get the scanning feature to work. Has anyone had this same issue? Do you know how to solve it other than plugging the USB cable directly to the computer? thanks!

    Hi Carlos9912,
    Does the Epson CX8400 support scanning over WiFi/Bonjour? I know my two HP Photosmart printers and my Epson I have do not support scanning over WiFi/Bonjour, despite the fact that they support printing functionality.
    http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?BV_UseBVCookie=yes&oi d=63069506
    (Product ID page for the Epson printer)

  • 7220 printer suddenly doesn't recognize ink tank

    My 7220 printer is several years old, and I have had no problem using third-party ink tank refills. Now, suddenly, I have gotten a "does not recognize ink tank" message, and the light is off inside  for the large PGBK ink tank that is still about 1/3 full. Replacing it with a new ink tank results in the same message. Ideas? Thanks.

    Hi Kanzas,
    You can try removing and reseating all of the ink tanks and the print head in the printer to see if the ink tank will be recognized; however, we cannot guarantee the quality, reliablity or compatibility of third-party ink being used in the printer, even if Canon genuine ink tanks are being used but are refilled with remanufactured ink. Sometimes during the ink refill process, the original ink tanks can be damaged and not function properly once reinstalled in the printer. 
    If reseating the ink tanks and print head in the printer did not work, replacing the ink tank with a new Canon genuine ink tank may resolve the issue.   If you continue to experience difficulty, the printer may require servicing; please call or email us using one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Migration Assistant doesn't recognize old iMac OSX

    I just bought a new iMac 20 inch running Tiger. In the migration assistant (first initial setup), it asks if I would like to transfer files and settings from an old iMac using a FireWire cable (I do). After it prompts me, I boot my "old" iMac (PowerPC G4 running OS 10.2.8) in FireWire Target Disk Mode (pressing "T" while restarting). Then connect the FireWire cable from my old iMac to the new iMac. The migration assistant says that OSX is not installed on my "old" computer (which it is).
    I've done some research on this forum about this topic. I've checked if my old Mac needs a firmware update (it doesn't). How can I fix this problem - I would really like to run the migration assistant from the get-go. Any assistance would be very appreciated. Thanks.
    iMac   Mac OS X (10.4.4)  

    One thing I don't know if it is relevant, but I found having the same username already created on my new machine when I ran the migration assistant caused it to fail.
    If you haven't created anything essential on your new Mac, run the restore disks over again, and create an alternative user name:
    http://docs.info.apple.com/article.html?artnum=61802
    Once that is done, then try to run the Migration Assistant from the Applications -> Utilities folder, and then login the old username and delete the new one.

  • Why finger scanner doesn't recognize already given finger scanning.

    Hi team,
    Device is accepting same finger scanning, it should either prompt with a message this finger scanning already exist?

    If I'm understanding you correctly why would you want to do that and why would you need a message telling you your finger has already been scanned? You have a number of entry points for different fingers and can be labeled which finger was used. It seems redundant to have a message come up telling you you've already used that finger when setting it up.

  • Printer doesn't recognize ipad

    Air printer 6520 doesn't recognize my ipad

    Sandy08
    Welcome to the HP Community Forum.
    If this is still bugging you, please take a look at the following:
    Add Device to Printer
    You may just need to jump down the Mobile Section...
    See Section titled > Mobile Device / iPad gets an App
    There is also an FAQ for AirPrint bits under the section titled "For Apple Products"
    Click the Kudos Thumbs-Up to say Thank You!
    And...Click Accept as Solution when my Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • Modem doesn't recognize Mac

    On a cold start, my modem doesn't recognize the Imac. I have to restart the modem to connect the computer to it. All connections are correct and tight. Ethernet to Ethernet. Absolutely no changes other than down loading Mavericks. Apple suggests  taking Imac into store and replacing mother board. Everything worked perfect until new download. The modem does recognize the ethernet connection after sleep, but not after a restart. Anyone else having similar problem.

    Linc, thank you for your reply.  The only things listed on the drop down menu are Bluetooth PAN, Firewire, Ethernet 2, Ethernet 1, Bluetooth DUN, VPN, PPPoE, and 6 to 4.  Wifi doesn't exist on the list.  I believe my problem might be that because the light on the Xfinity modem for wifi is not lit, it is not communicating with my Mac Pro.  Although the folks at Xfinity are showing that my wifi is active, it doesn't seem to want to behave.  I don't even know how to activate the wifi on my Mac.  Everyone keeps telling me to click on the little icon at the top of the desktop.  I don't have one of those icons there.

  • I've got my finger print scanner broken

    I've got my finger print scanner broken. I've got my iphone5s felt down from the bed . After that, the finger print scanner doesn't work as i can't unlock my iphone with my finger print . Also when i try to add another finger print , it said my finger was moved though i din't move my finger . At last, it said try a different finger. I'm pretty sure this is a hardware's problem (the finger print scanner) problem . If i brought my iphone to an apple store, would they fix or change the finger print scanner for me ? Thanks

    To rule out a software issue, try this:
    Reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting.
    If this does not work, try to set it up as new device, explained in this article:
    How to back up your data and set up as a new device
    If still not luck, contact Apple to get it serviced.
    Apple - Support - Service Answer Center
    Apple does not repair parts of the phone, you'll get a replacement.

  • Adobe Acrobat NI Pro doesn't recognize my wireless scanner, a Canon MG5520, but it prints from the same MG5520. This is ridiculous!

    Adobe Acrobat NI Pro doesn't recognize my wireless scanner, a Canon MG5520, but it prints from the same MG5520. This is ridiculous!

    I just used the "Quick Menu" in Adobe Acrobat XI Pro after wasting hours several days when the SSID and Network key/password were already activated and the Adobe software claimed no scanner was available. . These Adobe user manuals are next to useless. Now I'm still dealing with this problem: "Save As was unable to find tables in the document No file was created." (i.e., from the pdf file I created using NI). Well it's obvious there are tables in the pdf, but so far I haven't been able to get a result to determine the intrinsic accuracy of Adobe's pdf to Excel capability.

  • IMac doesn't recognize HP 4635 Scanner

    The Scan program that comes with the 4635 doesn't recognize the scanner. I can scan using Photoshop or Image Capture. The printer works fine.

    Hello , and welcome to the HP Forums, I hope you enjoy your experience! I see you're having problems scanning.  I would like to help! I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software. Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature. I would also suggest running your Apple updates:  OS X: Updating OS X and Mac App Store apps After the updates, I would recommend reinstalling the printer: HP Officejet 4630 e-All-in-One Printer series Full Feature Software and Drivers Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!

  • Photoshop CS5 doesn't recognize scanner

    Hi there,
    I bought a new iMac G5 (OS 10.6.4) four days ago only to find Photoshop CS5 was not recognizing the scanner on my two year old Samsung SCX 4500 Printer/Scanner (the printer works fine). I downloaded the most recent Samsung scanner driver (1.0) and Photoshop still doesn't recognize it. Both Preview and Image Capture on the Mac recognize the scanner which enables me to scan and then upload to Photoshop, but that adds a step I'd rather avoid. Unfortunately it seems that a lot of people are losing printer/scanner compatibility when they upgrade.
    Any thoughts on a fix?
    thanks
    dg

    Please see here:
    http://kb2.adobe.com/cps/405/kb405072.html

  • HP laptop (Windows) doesn't recognize printer

    I have an Airport Express. Cable modem is plugged into it. HP PhotoSmart 3210 is plugged into USB. RCA jack is running from AE to receiver. My iMac can access the internet (wireless airport connection), and I can print to the HP. However, I can't see the printer on the network. I have an HP laptop running windows xp. It recognizes the network, and I can connect to the internet. It doesn't recognize the printer either. Any suggestions?
    imac 2.16 ghz intel   Mac OS X (10.4.8)  

    Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
    http://tech.ifelix.net/1004.html
    Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
    http://tech.ifelix.net/1008.html
    Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
    http://tech.ifelix.net/1012.html

Maybe you are looking for

  • Getting Error While Going For Print Preview in ALV Report

    Hi, We doveloped a new report based on client requirment while going for print preview all the fields are shufling.Can you please guide me I am unable to solve this problem. Regards Suresh

  • BADI for ME22N

    I have found the BADI for ME22N . It is ME_PROCESS_PO_CUST. In this BADI, when i double click on the interface PROCESS_ITEM, I go in the method where i can write code. In this code i want to fetch the PO item no. which i get at run time. This method

  • Interactive reports in SAP query

    I created a SAP query which prints the sales documents numbers..After displaying the ALV list,when I click the sales documet ,it will directly go to the VA03 tcode. Can any body help how to develop it?

  • Conflicts with Lulu

    With the original release of 'Pages', there is a known conflict with www.lulu.com ( a book publishing site). Apparently .pdf files created from within 'Pages' do not embed Fonts correctly and a 'work around' is published at http://www.anvilwerks.com/

  • Making Classification Mandatory

    Dear all, I've created a class with characteristics for my vendor master. How can I make this classification assignment mandatory upon vendor master creation via XK01, MK01 and FK01? So that users would have to assign a vendor to a class thus enterin