TS3048 using vmware my mouse will not automatically go from apple to windows without control command button execution which has changed from new

When I first got the IMAC my mouse would go from windows to IMAC without having to strike control command keys to realease. I would like it to be as I purchased it and think it is some setting I accidentally changed or something and want it back to original can anyone give me guidenance

What kind of mouse is it?

Similar Messages

My phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?

my phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?

Hi, Just put phone in the recovery mode and restore to the factory settings. It should work.

My Ipad will not receive signal from new home Xfinity modem. I reset Pad but still doesnt work.

My Ipad will not receive signal from new home Xfinity modem. I reset Pad but still doen't get WIFI

Does it not show the presence of a wifi signal, or just not connect?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Why will images will not automatically load in apple mail despite having the setting turned on correctly

I have had this ongoing problem. I cannot get images to automatically load in mail. Instead I always have to click the load images button. I click on a message, click load images, the images load. I click on another message, then back to the message with the images and have to reload them.
In preferneces I have turned the View>Load remote HTML images on and off and on again, and rebotted multiple times. It makes no difference. The images do not load.
I checked Little Snitch, but all ports are open.
My firewall is set to let everything connect to mail. Even just turning off the firewall does not solve the problem.
I tried removing com.apple.mail.plist but that did not work either.
This problem occurs in Mail on a MacBook Pro and on a MacBook Air both using the newest version of OS Mountain Lion. The problem happened in OS Lion as well.
The senders are in my contacts, so that doesn't help either.
This is not an issue with the serve sending the images. The images load if I click load images. They just will not automatically laod.
I've read tons of posts but no one seems to know how to solve the problem.
Does anyone have any other ideas?

I am not sure how to link these discussions, so below I am pasting the post that helped me. And here is the link:
https://discussions.apple.com/message/15733241#15733241
louse101
Jul 25, 2011 3:17 AM
This is not a problem specific to Lion, but most recent OS X versions. Regularly I receive email formatted as HTML, which includes JPEG images embedded within them. These images are technically attachments, and as such, Mail.app displays them as a placeholder. Other mail apps will display these images inline, regardless of them being an attachment, remote image or otherwise.
How can I make these images load automatically?
MacBook, Unibody, Mac OS X (10.7), 750GB, 7200RPM WD HDD, 4GB RAM
This solved my question by louse101 on Jul 26, 2011 3:47 AM
No-one replied, but I found a solution on another board. Run Terminal (do a Spotlight search if you don't know where to find this), and type:
defaults write com.apple.mail DisableInlineAttachmentViewing -bool false
This will force Mail not to disable inline attachment viewing. Obviously, to reverse this, simple replace 'false' at the end with 'true'.
See the answer in context

HP X7000 Wifi Mouse will not pair since I upgraded to Windows 10

I upgraded to Windows 10 yesterday 29 July 2015 and now my HP X7000 Wifi Mouse will not pair with my laptop HP Pavilion dv7.

I have the same issue. I upgraded today and I have to use the built-in touchpad on my HP ENVY 17 instead of my HP X7000 Wifi mouse. From the looks of it, HP hasn't updated their drivers/software to support Windows 10. I am not very happy with HP - my ENVY 17 gets insanely hot in the palm rest area to the left of the touchpad, and now this wifi mouse doesn't work with Windows 10. 2 big negatives that will prevent me from buying HP in the future. The HP Envy 17 temperature issue is well-known among us customers that have to deal with it. Come on, HP - support your products!

File size will not automatically refresh in a finder window

i'm not sure how long this has been going on, but i've noticed that when i save a file onto an external drive, the size listed will not update automatically and says "zero k". if i change the window view to thumbnails, or to columns, then back to file list, the size is then listed correctly.
does anyone have a fix for this so it will update automatically?
my permissions have all been verified ...
Dual 2 GHz PowerPC G5 Mac OS X (10.4.5)

Dear Bob,
I am having the same problem but your solution does not swork for me. I have 6 VPCs on my "host" PC and 5 of them are working normally but one has gone into shut down mode but will not shut down. Due to memory restirctions, I can only run 2 VPCs at a time
so this one is cutting that to one. I found I can hibernate it by using CTRL-ALT-DEL on the host and doing "End task" on the dodgy VPC, but it still says "Running" in the Virtual Machines folder and it will not let me delete the .vsv file for the dodgy VPC.
If I then rty to open it again, the window opens but with "Shutting down" showing and none of the VM menus work: shut down and restart both say "Cannot shut down this virtual machine"; tools / integration features runs but says it cannot start integration;
Ctrl+Alt+Del does nothing at all. Ideally, I would like to restart the VM to get a few settings from it and then shut it down and delete it (it is a failed development) but right now I would settle for anything that gets rid of it altogether! Any suggestions?
Why doesn't MS provide a way of forcefully shutting down a VM?

HT1689 I can reach the iTunes Store from my iPod Touch, but it will not open on my PC running Windows 7. Message shows that iTunes has stopped working. This happens every time. I have updated iTunes Software. Will not solve the problem. What is wrong

I have uninstalled iTunes several times and reinstalled it on my PC running Window 7 with all updated loaded. When I click on the iTunes Store Box, Nothing happens except for a message that reads:
          iTunes has stopped working.
The following items give me a choice, but no answer comes up. The computer will shut down the website.
          "Check online for a solution and close the program"
          "Close the program."
There is an item below the box that is selectable for View problem details. When clicked a long list of items show up. I have listed some of the problems as written, but I do not understand them. I know the iTunes Store has been available on earlier versions of of iTunes but is not on this version. How can we go back and download an earlier version of iTunes?
     Here are some of the Problem Details:
     "Problem signature: APPCRASH
     Application Name:     iTunes.exe
     Application Version: 11.0.1.12
     Application Timestamp: 50c8fc7e"

I had this exact same problem. I found this fix and it worked for me.
Step 1:
Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll.
Step 2:
Browse and past that file into C:\Program Files (x86)\iTunes.
Hope this helps you. I wish I could remember where I saw this originally so I could thank them.
Good Luck.
Anthony

Will not send mail from new account

(I don't see a category for "mail" program on the discussions.)
I have a new account, but cannot get it to send mail from it. I get the message to try a different server, but no server works.
Thanks

Hi Mimi,
I reported your topic to have it moved to the Mac OS X v10.3 & earlier > Mail & Address Book forum.
It should be moved shortly.
In the meantime, it would help if you could post back with which OS version you are using (ie. OSX 10.3.9 ?) and who your ISP is (Internet Service Provider).
littleshoulders

ITunes will not accept password from new iPhone

Hi, hopefully this is easy. I've synced my iMac with my new iPhone 3G and everything is lovely except that when I go to enter my iTunes password (on the iPhone) it is always incorrect (e-mail address is correct). I have no problem doing this from my iMac. Everything else on the phone is spot on...whas up?

I e-mailed Yahoo for help with Yahoo mail and was given the following instructions: Remove Yahoo account from your iPhone, turn the phone off and back on, and then re-add to trigger a re-sync on your Yahoo acccount. This worked with no problem!! I was also given a link for a Yahoo Help article which I have included below. For those of you who are having issues, I hope this solves them!
http://help.yahoo.com/kb/index?page=content&id=SLN3702&locale=en_US&i=dKjQ5CeHO8 g6cRFdl9iwjQ==

PDF will not display in an IE browser window

I have the following setup:
Windows Vista Business w/ SP2
Internet Explorer 8 (8.0.6001.18813)
Adobe Reader 9 (9.1.3)
When accessing a PDF document using IE8, the PDF will not display in an IE browser window. Instead, the PDF opens in a new Adobe Reader window.
When accessing the same PDF in Firefox or Chrome, the PDF appears in the browser window.
I have tried repairing Adobe Reader using the Help>Repair Adobe Reader Installation menu, both by running Adobe Reader as an admin and not. I have confirmed that Adobe Reader "Internet" preference "Display PDF in Browser" option is enabled (checked). I have enabled/disabled this preference without affect. The PDF document is always opened in it's own Adobe Reader window.
I have tested this using different PDF documents served up by different servers. The result is the same. The PDF document is always opened in it's own Adobe Reader window.
How can I get the PDF to open in an IE8 browser window?
I look forward to any suggestions offered.

Hi Carolyn,
I am experiencing the same symptoms as gaijindragonslayer described above, and my Internet Plug-ins folder is empty. I would like to have Preview as my default pdf reader, but am unable to view a pdf in Safari at all right now -- I have to download the pdf and then open it with Preview separately in order to view it.
What else might cause this?
Thanks for your help.

Safari for Windows will not log into IIS sites with Windows Authentication

Safari for Windows will not log into IIS sites with Windows Authentication enabled. The IIS log has thousands of login attempts from Safari that result in 401 errors.
I disable Windows Authentication on IIS and it works fine. The problem with that is that my Windows clients stop working properly with seemless logins when I disable this.
The expected behavior is that Safari will work with basic authentication when NTLM does not work. That would result in a password prompt followed by a successful login instead of Safari stopping at "Loading" while hammering the IIS logs.
It does this on all machines that I have tried.
Any ideas or is this a bug?

I noticed that as well. I have to wonder if it's due to not making note of the the different end of line characters between Mac OS X and Windows in code.

Ever since I had updated my phone to ios 6, i noticed that it no longer saved photos to my camera roll. If i download a picture on on an app, it will not automatically save it to my camera roll as it used to do, nor does it save any image

Ever since I had updated my phone to ios 6, i noticed that it no longer saved photos to my camera roll. If I take a picture on Instagram, it will not automatically save it to my camera roll as it used to do, nor does it save any image, I just want it fixed.

To gdgmacguy your a f****** idiot for one I'm having the same problem as pennymar. And you tell me to quit whinning. You got more problems then the iOS 6 you did not answer my question nor the other 13 or whatever you replied to within a 30 min time frame. You must got nothing better to do then to harass people and to pretend you know something about apple products. Which you don't from what I've read the other advices you should have gave to other people. But you didn't you replied a question back to the people asking a question. So if your not gonna use these community forums the right way don't use them at all.

Reporting Services will not automatically use a different replica for the report server databases when a failover occurs. How to overcome this issue

Reporting Services offers limited support for using AlwaysOn Availability Groups with report server databases. The report server databases can be configured in AG to be part of a replica; however Reporting Services will not automatically use a different
replica for the report server databases when a failover occurs. How to overcome this issue? is there any workaround for that..
Rahul

Hi.
With the AlwaysOn listener you should have a single DNS name to connect to regardless of which cluster node is active. Are you using the listener service? If not, please refer to the link below.
http://msdn.microsoft.com/en-us/library/hh213417.aspx#AGlisteners

TS3048 My keyboard will connect wirelessly but my mouse will not. I've put new batteries in the mouse and the green light is blinking but it just won't connect!!! I don't have a 'wired' mouse so I can't get into preferences etc!!! Pls help

My keyboard will connect wirelessly but my mouse will not. I have tried many times, put new batteries in etc. The Bluetooth appears to be on (as the wireless keyboard is working). I don't have a 'wired' mouse so I can't get into preferences etc. Is the mouse dead perhaps? The green light is flickering so it should be ok???
Thank you for your help
Sully (frustrated Irishman)

From what you say I would suggest the batteries are not connecting properly.
First, thoroughly clean all contacts, both inside the mouse and the contact points of the batteries. Use an alcohol based cleaner (whisky will do, hic!) dampen (not wet) cotton buds for cleaning.
Then check to see if they fit firmly. If you can shake your mouse and hear things are loose, that will be the batteries. Check the make. Apple and Duracell, in that order, are the best batteries. Where slight undersizing has been reported they are with other than the foregoing.
You can resolve the size problem with appropriate packing but that will always be a makeshift solution. After, reassemble, turn on the mouse and with luck, away you go.
Hopefully this will solve your problem but in any case let us know how you get on.
Message was edited by: seventy one

HT1338 All of a sudden my apple mouse will not scroll down, it will scroll back up the screen but I have to use the slide bar to move the screen down. Can someone offer a solution?

All of a sudden my apple mouse will not scroll down the screen, it will scroll back up but I have to use the slide bar to move down the screen. Has anyone had this problem and how to fix it?

http://computer-hardware.wonderhowto.com/how-to/clean-apple-mighty-mouse-scroll- ball-217746/
http://www.apartmenttherapy.com/how-to-clean-apples-mighty-mou-108357
 Cheers, Tom

TS3048 using vmware my mouse will not automatically go from apple to windows without control command button execution which has changed from new

Similar Messages

Maybe you are looking for