TS3048 Wireless Keyboard very slow!

Hi Guys,
Just got myself a new ipad for work as i wanted to use it to compile reports. Bought a wireless keyboard, downloaded pages and everything was hunky dory until yesterday. I disconnected my pad from the keyboard and when i came to reconnect i noticed the keyboard was very slow and jittery at typing. You go to type a word and you have typed it before it even appears on the screen, and it takes about a second for each charater to load, its ridicolous. Also i have noticed it is duplicating letters but i'm not holding down the keys for a long period of time, this seems to be really sensitive. So by the time i have typed hello it comes out out 'hhelloo', then it is just as slow deleting than it is appearing. Tried changing the batteries but this has made no difference what else can i try?
Any suggestions as i am really loosing my patience and don't want to be throwing this keyboard off of the wall any time soon!
Chris.

Hello:
Was the keyboard previously paired with something else? What indications/messages do you receive?
In any event, try resetting the PRAM and SMC.
Barry

Similar Messages

HT1430 ios7 keyboard very slow

tactil keyboard very slow with ios7 with my iPhone 4 ; any idea ?

Following one of the other similar posts I discovered that you only need to reset the keyboard dictionary to fix this problem rather than reseting all your settings
settings - general - reset - reset keyboard dictionary
Saves having to go through all your settings and adjusting them again all you lose is any of the words you've added to the dictionary.
Much easier

Apple Wireless keyboard and slow response

I just purchased a 27" Retina display iMac. It came with a wireless keyboard but every now and then, typing on it can be painful as the letter won't show up on the screen until after a few seconds. Has anyone out there had this problem and figured out how to fix this? I checked the battery level and it's at 100%. Running Yosemite.

I'm also having Bluetooth problems. The mouse periodically "slows to a crawl" and I have to cycle it's power.

Macbook Pro wireless is very slow on Campus Network compared to Windows PCs

I noticed that my Macbook Pro is VERY slow using the wireless connection at the Univeristy Campus, I first thought it's the network, but I see my friends with Windows PCs and their connection is blazing fast.
I am using a Macbook Pro 13" with Intel Core 2 Duo CPU 4 GB Memory with OS X Lion installed.
I have tried Safari, Chrome and Firefox and they all are equally slow.
I know from the Campus Tech Support that they are using Cisco Enterprise Routers, which used to have issues crashing Mac computers when they get connected. But since Lion this problem seems to be resolved.
I still think that my Mac should not be that much slower on a wireless network than my friends Windows machines. I did a speedtest on my Mac and I got speeds of below 500kbits/s where my friend achieved 38mbits/s on a Windows 7 Netbook with intel Atom CPU and 2 GB RAM, both tests were done on Firefox. Even when I tether my phone through wireless hotspot I get faster speeds.

When did this difference begin? Did you make any recent changes?

Cisco Aironet 1200 wireless network very slow

I have a simple wireless network set up, 2 - Cisco Aironet 1200 AIR-AP1220B-A-K9 wireless access points with 2 dBi Diversity Omni directional Ceiling Mount Antennas. They are the only devices connected to a Multitech Routfinder router, the WAN side the router is connected to a dedicated DSL connection. They are powered by AIR-PWRINJ3 power injectors. The WAP get the IP address from the DHCP in the router.
When connecting to the wireless network it runs very very slow, the signal strength is excellent and the connection speed is 54 mbps. But when opening a web browser it takes for ever to load a simple page like msn.com. If I connect the notebook directly to the router it runs very fast. We have tested with several notebooks and have the same problem. When I view the available wireless networks in range the only two that show up are the two Cisco 1200 WAP.
I have done the following with no improvement:
Change the channels from auto to 6 on one and 11 on the other.
Reset to factory defaults.
Update the firmware to c1200-k9w7-tar.123-7.JA2.tar
Replace the 802.11b radios with 802.11g radios AIR-MP21G-A-K9.
Disable the Aironet extensions.
Following is the configuration from one of the access points (before the firmware update):
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname MMA1
aaa new-model
aaa group server radius rad_eap
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa authentication login default local
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa authorization ipmobile default group rad_pmip
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
username xxxx privilege 15 password xxxx
username xxx privilege 15 password xxxx
ip subnet-zero
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
ssid MMA1
authentication open
guest-mode
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0
rts threshold 2312
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 192.168.10.100 255.255.255.0
no ip route-cache
ip default-gateway 192.168.10.1
ip http server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag/ivory/1100
ip http authentication aaa
bridge 1 route ip
line con 0
line vty 5 15
End
Any suggestions would be greatly appreciated.
Best regards,
Randy

Thanks for the info.
The documentation say not to switch from auto to full duplex or half duplex when using inline power, well I think it says the AP may reboot. I may have tried half duplex before I upgraded the firmware.
While upgrading I disconnected the AP, used a patch cord to connect it to the router and pluged the power directly into it to make sure the wiring to the AP was not the problem and it did the same thing.
However, when trying to upgrade the firmware it took ~ 45 minuets to upload the image and filed a couple of times retrying. I connected the AP to the notebook directly with a crossover cable and it uploaded in about 45 seconds.
That got me to thinking that there may be a problem with the router so I have replaced it with a Linksys.
In the mean time the DSL went down yesterday so I have not been able to test the new setup.
The cables are T568B
W/O
O/W
W/G
B/W
W/B
G/W
W/B
B/W
Best regards,
Randy

TS3048 wireless keyboard volume button brings up dashboard?

everytime i hit the volume button the dashboard pops up how can i fix this?

Put truly fresh batteries in the keyboard.
Un-pair and re-pair the keyboard with the computer.
Attempt the PRAM reset again.
If you do not get the 2 boot chimes then I would suggest you reset using a USB keyboard. Any USB keyboard will do. If you don't get the 2 chimes when using a USB keyboard then either you are not holding down the keys correctly / early enough or there is something wrong with the computer itself.
If you do get the 2 boot chimes you can then go back to the wireless keyboard and re-pair it.
Take a peak at this article. It is fairly exhaustive in troubleshooting suggestions for this type of issue: http://support.apple.com/kb/TS3048
Hope that helps.

TS3048 wireless keyboard pairing problems

hello there
have been trying to pair a wireless keyboard to my macbook, am given a code by the BlueTooth assistant and told to enter it into the dialogue box when prompted, but do not receive the prompt and the pairing attempt times out.
any idea what the problem might be?
cheers

Hello:
Was the KB, by chance, paired with another device?
Barry

TS3048 wireless keyboard does not work

I just used my Apple wireless keyboard a few days ago. Today I cannot get it working. Caps lock does not even light up, so I canged batteries. My MacMini cannot detect bluetooth of my keyboard, it seems. Any suggestions?

Hello:
Try resetting the SMC.
Barry

TS3048 Wireless keyboard turns on but can not type. Can not do any of the trouble shooting I read about because I can not type my password .... Please Help

The Apple wireless keyboard will not work. Batteries are new, light is on & goes into search mode. Worked fine yesterday, today - wont type. Can not do any of the troubleshooting I read about online because I can not type my login. Is there a lock key I may have hit by accident and can unlock? The bluetooth is working because my wireless mouse works...Please Help

I was just researching the same problem and found this info :
"I figured it out, i had "mouse keys" on.
To fix go to Preferences>Universal>Mouse> MouseKeys and click off"
sure enough I had the 'mousekeys' on and turning it off - keyboard now working
hope this works for you

TS3048 Wireless keyboard capslock possessed

My capslock does not respond BUT TURNS ON/OFF RANDOMLY. IMAC, LEOPARD, WIRELESS KEYBOARD. THOUGHTS?

Just checked shortcuts. They are all default.
Haven't spilled anything to my knowledge but I do drink coffee while I work.
I've washed the old white keyboards in the dishwasher but not the aluminum. Will take it home tonight and try it. At this point I think there's nothing to loose.
While I can type slowly and consciously to keep from hiting the TWO AT THE same time, if I relax it happens.
Thanks for the replies. h H h H h H h Y y Y y Y 6 6 6 N n N n N

TS3048 Wireless keyboard erases and retypes what it wants. Help please!

Occasionally, and just now while using PhotoShop, my wireless keyboard erases numbers I've typed in dialog boxes and types different numbers. Is there a fix for this?
Thanks much in advance!

Hello:
Please do not post the same question twice in different forums.
As someone indicated, it is probably a failing/failed KB.
Barry

TS3048 Wireless keyboard respond

None of the keys on my wireless keyboard respond. The green light comes on and then fades away as normal. The bluetooth detects the keyboard and says it's connected. However, NO keys work at all. None. Nada. Zilch. Any ideas??

This doesn't seem to be the case. The Option key toggling wasn't enabled in Universal Access. Toggling mouse keys in universal access didn't seem to help one way or the other either

TS3048 Wireless keyboard

I was given an apple wireless keyboard as a gift and it is paired with my I Pad 2, I want it to pair with my daughters I Pad air/4 when I try it automatically pairs with mine and not hers, anyone can give me suggestions on how to pair the keyboard with her I pad.

Hey, Barry.
Thanks the link worked, for anyone else joining this is what you do.
Thanks again Barry
You can stop using a Bluetooth accessory by either turning off the accessory, or turning off Bluetooth on iPad.
Unpairing a Bluetooth accessory
If you've paired iPad with an accessory that you no longer wish to use, you can unpair the accessory.
From the Home screen choose Settings > Bluetooth2. If Bluetooth isn't on, turn it on.
Choose the accessory and tap Forget this Device.

TS3048 wireless keyboard will connect but pairing is unsuccessful

My brand new wireless keyboard will connect but pairing is unsuccessful. OS X version 10.6.8. Any ideas of what the problem is?

I'm a bit confused, the keyboard must be first paired in order to connect. What do you see when you use System Preferences > Bluetooth > click the "+" icon to add a device.
Regards,
Captfred

TS3048 Wireless Keyboard issues

My wireless keyboard will not stay on, any suggestions

I had the same problem. I changed batteries and tried pairing with Mac and iPad but couldn't with either. In this case the adage 'get a bigger hammer' worked for me. I pushed my batteries in hardish and noted that they depressed and returned under spring pressure, I tapped and banged the keyboard in the carpet on its end. In retrospect it was because the keyboard wasn't staying on. Once I did the above it stayed on and connected with my Mac, it must have reset somehow though as the Mac didn't recognise it as previously being connected.

TS3048 Wireless Keyboard very slow!

Similar Messages

Maybe you are looking for