TS3147 I seem to have lost fax capability with Snow Leopard. Does not appear in Print as before. Cant find fax in system Preferences. No drivers for fax found Bob Wines.

I seem to have lost fax capability with Snow Leopard.
Does not appear in Print as before. Cant find fax in System Preferences. No drivers for fax found.
Initially said it was downloading software but no longer does this. Fax test works on HP site.
Using HPC410aHP Photosmart Premium
Any help would be appreciated.
Bob Wines.

Thanks for your detailled description of the faxmodem installation!
I've tried this with Mac OS X v10.8 Mountain Lion and it works fine.
I've to type "cupsctl WebInterface=yes" in terminal to see the interface.
Does anybody know, if send faxes are saved somewhere?

Similar Messages

I have my first mac. the music folder does not appear in favourites from the finder menu so i cant transfer my itunes library

I have my first mac. I want to transfer my iTunes library from my pc but the music folder does not appear in favourites when I select finder.

Choose Home from the Finder's Go menu.
(117823)

I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?

I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?

Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3

I have a 27inch iMac with snow leopard and 1 user, and a 24 inch (older) upgraded to yosemite and 5 users. I want to wipe the 27 inch and transfer everything on the 24 to it. I do have time capsule 3tb but not sure how to do it

I have a 27inch iMac with snow leopard and 1 user, and a 24 inch (older) upgraded to yosemite and 5 users. I want to wipe the 27 inch and transfer everything on the 24 to it. I do have time capsule 3tb but not sure how to do it

Move your content to a new Mac - Apple Support

When I complete all the steps to create Apple ID.In part that requires the credit card i dont have credit card and the option none does not appear.What can I do?

When I complete all the steps to create Apple ID.In part that requires the credit card i dont have credit card and the option none does not appear.What can I do?

Greetings anabeqiri,
Thank you for contributing to the Apple Support Communities.
The advice and steps in this article may help if you don't see "None" as a payment option when creating your Apple ID:
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
All the best,
Jeremy

I have a MacBook Pro with Snow leopard (10.6.8). Downloaded Lion from Aplle store and got a bill but no upgrade. Bad hearing can't use telephone to support. Apple store can't help. CASE NUMBER: 19*****63

I have a MacBook Pro with Snow leopard (10.6.8). Downloaded Lion from Aplle store and got a bill but no upgrade. Bad hearing can't use telephone to support. Apple store can't help. CASE NUMBER: 19*****63.
I am hard or hearing and can't use the telepohne support and live on an island and can't get to a shot to buy the Lion.
<Case Number Edited by Host>

Try d/ling again. In the App Store, option-click the tab

I have a desktop imac with snow leopard 10.6.8 OS I have a time capsule that shows all restore dates of 2009 but there is a Jan 2012 restore that is faded looking and will not open to be restored.

I have a desktop imac with snow leopard 10.6.8 OS
I have a time capsule that shows all restore dates of 2009 but there is a Jan 2012 restore that is faded looking and will not open to be restored.
Thanks for any help you may give.

Whatever is in the Finder window wasn't backed-up on that particular backup.
See the pink box in Time Machine - Frequently Asked Question #15A

I have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD.   Anyone else with this problem? CAn I uninstall the 10.9.3 update?

i have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD.   Anyone else with this problem? CAn I uninstall the 10.9.3 update? Also my HP scannerwill not save the displayed scanned document since this update! it just saves gray.

If you have your old system backed up then erase the drive and restore your backup. If you don't have a backup then backup your entire Home folder. Erase the drive and install Snow Leopard after which you can restore your Home folder from the backup.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Or you can:
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).

I have a MacBook pro with snow leopard 10.6

I have a MacBook pro with snow leopard 10.6, how do I erase everything and start fresh? I forgot my password and it asks me to enter it when i insert the disks and select install?

Restart with the Option key held down and restart from the disk. If this produces a screen with a padlock, provide the computer's firmware password; if you don't know that, contact Apple or an authorized service provider.
(80406)

I have internet connection but my incoming email does not appear. When I try to access new email it says, " connection to server has failed" Help

I have internet connection but myh incoming email does not appear. When I try to access new emails it says, "connection to server has failed". Help

What did your email provider say about it when you contacted them?

Hi I have a Mac Book and I am trying to turn on my icloud. However when I go to system preferences the icloud icon does not appear anywhere. Where can I find it?

Hi I have a Mac Book and I am trying to turn on my icloud. However when I go to system preferences the icloud icon does not appear anywhere. Where can I find it

it's not under "internet and wireless" in system preferences?

App asks to have location services turned on but App does not appear in location list.

I start the EZ Word Cheats and it starts with the menu open. I click on Quick Import and a blue box appears with the message to turn on Location services in settings. I start the settings app, click Privacy, click Location Services, but EZ Word Cheats does not appear in the list of Apps that can have Location Services turn on. Shutting the iPad off or resetting it does not help.

I reset location services in Setting>General>Reset>Reset Location & Privacy and that fixed the problem. I need not need to restore from new. When I ran EZ Word Cheats after the resetting location services and then clicked on the Quick import under the menu, a message came up asking access to Photos instead of location services. This is the correct behavior since the program does need access to my photos but does not need Location services.

How I set up an RS232 serial fax modem with Snow Leopard

A few times each year I need to send a fax. I don't have a fax machine.
My Macbook Pro does not have a phone input or built in modem but I have an old RS232 serial fax modem in perfect working order.
I purchased a Pluggable PL2303 USB to RS232 adapter.
Here is how to install a serial fax modem on a Mac running Snow Leopard using this adapter.
1. With the adapter disconnected, Install the Prolific driver for Snow Leopard found at http://plugable.com/drivers/prolific/
2. Plug the adapter into a USB port. You should get a window recognizing it and asking to set it up.
3. If you're not there, go to System Preferences and click on Network. In Network, click on "USB Serial Controller D". You will get a configuration section.
4. In the drop-down under configuration, click on "Add configuration". Name this configuration what you like. I named mine "fax modem".
5. Click on the "Advanced" button near the bottom of the configuration section. You will get a window with 5 tabs, labeled "Modem", "DNS", "WINS", "Proxies", and "PPP". Click on "Modem".
6. Fill in the modem fields "Vendor", "Model" and "Dial Mode" using the field drop downs. I found my Vendor, Zoom, in the drop down list but my model (56K faxmodem) was not in the Model drop down so I guessed and picked "Universal 115K".
I left the defaults - Dial Mode to "Wait for dial tone before dialing", Dialing to Tone and Sound to On, and "Enable error correction and compression in modem" checked.
Click OK. Click Apply. Close System Preferences.
7. Adding the fax to Printers and Faxes in System Preferences cannot be done the usual way, by clicking the + sign. Instead, the fax printer will be installed using the CUPS administrative tools as follows:
Open a browser and type "http://localhost:631/" (without the quotes) into the browser's address field.
This should bring up the CUPS (Common Unix Printing System) page.
8. Click on the "Administration" tab. Under "Printers", click on "Add Printer" and log in to CUPS as your system administrator.
You will get the "Add Printer" screen.
9. Under "Local Printers" select "Fax". Then click "Continue". You will get the URI screen with the word "fax" in the "Connection" field. Fill in the field so it looks like this:
fax://dev/cu.usbserial
Then click "Continue". You will get the name, description and location screen.
10. Fill in the fields as indicated. For name, I used "faxprinter". For Description, I entered "fax modem". For Location I entered "Serial Port". I left "Share this Printer" unchecked. When done, Click Continue. You will get the PPD screen.
11. Ignore the "Make" field. Next to "Or Provide a PPD File", click on "Choose File".
Navigate to boot disk (usually Macintosh HD)/ System / Library / Frameworks / ApplicationServices.framework / Versions / A / Frameworks / PrintCore.framework / Versions / A / Resources / and choose the file "Fax.ppd".
12. Click "Add Printer" and you are done.

Thanks for your detailled description of the faxmodem installation!
I've tried this with Mac OS X v10.8 Mountain Lion and it works fine.
I've to type "cupsctl WebInterface=yes" in terminal to see the interface.
Does anybody know, if send faxes are saved somewhere?

I lost my purchases music and it does not appear in the purchased tab in the itunes store ?

i lost all my purchases music and went to re download them in the purchased tab in itunes store, but music did not appear only apps. Can anyone help me as i have over 100 songs purchased and would really appreciate some help ?

dawnfromalloa wrote:
i lost all my purchases music and went to re download them in the purchased tab in itunes store, but music did not appear only apps. Can anyone help me as i have over 100 songs purchased and would really appreciate some help ?
This service is ONLY available in beta version in the U.S.
"You could try going to the tab "store" then scroll down to "check for available downloads. I hope this helps!"
This will not work.

Can I still buy iMovie '11 from the App Store? (I have an older iMac with Snow Leopard which cannot run the current version, iMovie 10).).

I am running Snow Leopard, and I bought a new camera (Canon Vixia HF R300). I am so far unable to download my movies into iMovie, and from what I have been able to ascertain, I need to upgrage to iMovie '11 to support the camera.
I have read that iMovie '11 was available at the Mac App Store, but now I see that the App Store has the new version, iMovie 10.0, which my Snow Leopard mac cannot support. Can I still get iMovie '11 from the App Store?

Apple has not made older versions of apps available in the MAS, only the most recent version. Apple constantly reminds folks that they alone are responcible for backing up their content purchases for the very reason that content may not always be available from the MAS in the future.
To answer your question, no, a license for a particular version of an Apple app does not entitle you to older versions of the app.

TS3147 I seem to have lost fax capability with Snow Leopard. Does not appear in Print as before. Cant find fax in system Preferences. No drivers for fax found Bob Wines.

Similar Messages

Maybe you are looking for