TS3148 A grey progress bar will appear and will load for a little bit and will shut off, what do I do?
On my Mac book pro, a grey progress bar will appear for a
Little bit and the computer will shut down.
What do I do?
Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)
Similar Messages
-
I'm on my iPod touch 4th generation and I wanna delete apps. Well I hold it down nd the X appears but as soon as I press the X it doesn't do anything for a little bit and then shuts down and turns on again by itself, HELP ME DELETE!
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I had spilled soda on Mac keyboard the other day. Dried it as best I could , took battery out Nd hard drive. I let it sit for a little bit and turned it back on and I get a beeping sound. What do I need to do?
That isn't good. The RAM is probably damaged, hopefully not the RAM slots. This article explains why.
Never leave food nor drink near your computer again. -
Why is my battery percentage going up and down while charging? It's not rapid, for example, it was on 78% for 10 minutes, jumped up to 79% for 30 minutes and then it just jumped back down to 78%
CEMcLean21 wrote:
... after it had been on for a couple of minutes it shut down and then the Apple sign would appear
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414 -
I bought a movie on itunes and it is fully downloaded. I tried playing it and after a few minutes, my computer would freeze. I then shut down my computer and tried to start over. However, all that I am able to play is the movie's extras (deleted scenes, backstage pass, etc). I need to know why this won't play because I paid $15 for the movie. Help
How to report an issue with Your iTunes Store purchase
-
Macbook Pro get grey progress bar and shuts down
Hello All,
I have a macbook pro and I faced this issue out of nowhere. After shutting down the system last time, when I started the system, I could hear the apple chime, apple logo appeared with grey progress bar below it. The bar will progress to 1/3 or so and it will disappear and after few seconds laptop will shut down. I tried few times but same things was happening again and again.
After going through few support forums, I booted by pressing D to run the Apple hardware test. It wouldn't do anything at all. Apple hardware test was stuck at pass number: 1 with elapsed time of 7 seconds. All retry were the same as the first one.
I rebooted the laptop and pressed command + R and entered in recovery mode/recovery disk. I clicked on Disk utility and select Macintosh HDD and started disk verification. I got hundreds of errors/warning, saying Missing thread recode (id = XXXXXXX) and it suggested to repair the disk. I tried to repair the disk but after similar message, pop window appeared with message that disk cant be repaired. I exited out of it and went back to recovery menu.
I selected Reinstall OS X Mountain Lion and went through steps and at the point where I have to select my HDD, there was just one option and I couldn't select it. It gave message that This HDD is locked. I can't start in safe mode, and can't reinstall OS X
I believe this is because of my hard drive might have crashed. can anyone help?
Thank you,It does sound like your having mechanical or other issues with your boot drive.
If your machine is under AppleCare or warranty you can take it to them.
If you can user service your machine, you can opt to try to see if a new drive will work and install it yourself, or have a local geek do it for you. -
Grey progress bar when booting up loop
When I boot up my computer, the grey progress bar below the apple logo appears. It gets to the very end of the bar and then my computer shuts off. When I turn it on again, the same thing happens. Is there any way to fix this?
Windows doesnt do the same system checks that OS X does, so thats why you wont get the issue witthin Windows.
After you replace the drive, you should be able to put it in an enclosure and then migrate the data over to the new drive.
As far as your Windows partition. You may be able to use Winclone (www.twocanoes.com) to image and restore it. I don't know if it will work though when the drive is connected externally. -
After waking from sleep, my Macbook Pro shows grey progress bar
I have the mid 2012 Macbook Pro (13 inch). When I leave it open and let it fall asleep after the time I have chose, it wakes up again fine.
But if I choose the sleep from the Apple in the menu bar or SHUT the lid, when I wake it up, it shows the grey progress bars and takes about 3-4 minutes before it is responsive again.
Any advice? I'd just like it to sleep normally. It's a bit embarrassing to have to wait that long if I'm trying to show off how cool my laptop is
Here are the specs, copied from my System Information:
Model Name: MacBook Pro
Model Identifier: MacBookPro9,2
Processor Name: Intel Core i7
Processor Speed: 2.9 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 8 GB
Boot ROM Version: MBP91.00D3.B08
SMC Version (system): 2.2f41
Serial Number (system): C2QJF09CF5WW
Hardware UUID: 494AC457-6424-55C1-ACC3-61DDC76AA035
Sudden Motion Sensor:
State: Enabled
Thanks for any help!This was added to all 2012 model MBPs as part of some bs Euro power saving standard. By default, when on AC power, the system has to sleep for 14400 seconds before this deeper hibernation state happens. When that happens, the system takes a while to resume to normal operation. There is a workaround for this and it is available on this site, but I urge you to call AppleCare and complain about this issue yourself please because without a lot of complaints about it, Apple won't fix it. The workaround is to simply issue a command in a Terminal prompt that disables this option from happening, but it's not a fix by any means.
-
I use Win 7 PC with iCloud and Outlook 2010 for syncing my Contacts and Calendar. They have stopped syncing...mostly.
Now, appointments I enter on my local Outlook (iCloud) Calendar goes up to iCloud fine. But, data I enter on iCloud directly does not come down to my local Outlook iCloud Calendar. If I reboot the computer, the iCloud data shows up.
Also, Contacts I try to enter on my Outlook (iCloud) Contacts goes up to iCloud fine, but does not show up in my local iCloud Contacts.
All syncing works with my iPhone.
I have signed out of iCloud on PC. I have stopped syncing and re-started. No change.
I have an .aplzod folder for iCloud. I have a separate Earthlink.net.pst email account in Outlook and a me.com.pst Outlook email account (which I don't actually use) listed under Data Files.
Any help would be appreciated. Curious that Outlook will upload to iCloud but not receive downloads unless I reboot. However, rebooting does not download the missing Contacts.
Jim RobbinsHi Jim!
You've started off with some good troubleshooting steps, so let's see if we can take this a little further and figure out what the issue is with your iCloud contacts and calendars. I have two articles here that will help you troubleshoot this issue a little further, but the troubleshooting steps for both articles are exactly the same, so I will lay those out for you here:
Note: When using iCloud Control Panel 2.0 and later, iCloud Calendar event descriptions in Outlook 2010 do not support text formatting (bold, italics, or underline), HTML, images, or attachments. The contextual (right-click) menu has also been disabled.
If you are having trouble with a PC (with Outlook 2007 or 2010) and iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Verify that you are using a Windows configuration that is supported by iCloud. For more information, see iCloud system requirements.
When enabling Calendars in the iCloud Control Panel, part of the setup process is to copy your Calendars data from the default Outlook ".pst" file to iCloud, and then remove the Calendars from the ".pst" file by placing them in the Deleted Items folder in Outlook. The Calendars data is then stored in the iCloud data set within Outlook so that changes can be pushed to and from Outlook by iCloud. Be sure you are looking for your data within the iCloud dataset within Outlook after enabling Calendars in the iCloud Control Panel. The deleted files can be seen by viewing Deleted Items within your Outlook Folder List. This is not iCloud removing your data; iCloud simply copies your data into the iCloud data set and then removes the local Calendars data by placing it in the Deleted Items folder.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in Outlook. Click here for more information about troubleshooting your Internet connection.
Open a secure website to test if you are online as is necessary for iCloud Calendar. This also tests if the ports 80 and 443 are accessible. Outlook requires port 443 access to iCloud in order to push and pull updates to and from the iCloud Calendar servers.
Verify that your iCloud member name is entered into the iCloud Control Panel pane. See iCloud Setup for more information about setting up iCloud on Windows.
Completely close and reopen the iCloud Control Panel.
If you recently made changes in Outlook and they are not moving to your other devices or vice-versa, click the Refresh button in Outlook.
Turn iCloud Calendar off and back on:
Close Outlook.
Open the Windows Control Panel:
In Windows 8, move the pointer to the upper-right corner of the screen to show the Charms bar, click the Search charm, and then click the iCloud Control Panel on the left.
In Windows 7 and Vista, choose Start menu > All Programs > iCloud > iCloud.
Remove the checkmark in the checkbox next to Mail, Contacts, Calendars & Tasks, and click Apply. Wait a few seconds, then replace the checkmark, and click Apply.
Open Outlook and test to see if the issue has been resolved.
Ensure the iCloud Outlook Add-in is active within Outlook.
Outlook 2010:
Open Outlook 2010.
Click the File menu.
Click Options in the left panel of the Outlook window.
Click Add-Ins in the left panel of the Outlook Options window.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
For Outlook 2007, follow these steps to verify the iCloud Outlook Add-in is active
Open Outlook 2007.
From the Tools menu, choose Trust Center.
Select Add-ins from the left column.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
For additional information about managing Add-ins with Microsoft Outlook, see this Microsoft support document.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thanks for using the Apple Support Communities!
Cheers,
Braden -
I am upgrading my iPad to iOS 7 but the progress bar is at 1/4 position for two hours and not moving forward. Is there any problem with it? What should I do? Thanks.
This is a concern amoung many corporate users. It's going to take somekind of policy change with apple.
Enterprise support:
Call enterprise support (866) 752-7753 to create a case ID number -
My Ipad was downloading the new IOS6 across WiFi and it froze half way through the process. The progress bar has been stuck at 50% for 2 hours now I cant turn it off or reset it any ideas
It solved the problem with my iPod. Had the same issue as above since yesterday. Thought my iPod broke.
This helps. I've got back my iPod. So happy................... -
My iPod 5th gen will not completely turn on it shows the apple symbol then shuts off I have restarted it and tried to plug it into my computer but cannot find it to restart it
Its been like this for awhile and I can not fix itTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Will appear a new firmware for nokia 5800?
one question ... will appear a new firmware for nokia 5800 will soon ? Thnx !
It's not about old or not, it's about that productcode which is under your battery. Take a look here, and follow the instructions. If there is not an update available, you just have to wait.
http://europe.nokia.com/support/download-software/device-software-update/can-i-update# -
I can start my iPod but it will only stay on the Apple icon screen for 5 minutes and then shuts off, what do I do to fix this problem?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Show Progress Bar while only on Page Load.
Hi Experts,
I want to show progress bar every time when page loads.
Progress bar is coming on the page. but it is not going off after page is loaded.
Below is the code which i added for the Progress bar.
//written on Header Text of Page
<script type="text/javascript">
<!--
function html_Submit_Progress(pThis){
$x_Show('AjaxLoading');
window.setTimeout('$s("AjaxLoading",$x("AjaxLoading").innerHTML)', 100);
//-->
</script>
//written on footer text of Page
<style> #AjaxLoading{padding:5px;font-size:18px;width:200px;text-align:center;left:20%;top:20%;position:absolute;border:0px solid #666;}
</style>
<div id="AjaxLoading" style="display:none;"><br /><img src="#APP_IMAGES#progress_bar.gif" id="wait" /></div>
//called the function Execute on Page Loads
html_Submit_Progress(this);Progress bar is continuously showing on the page after page is loaded.
I want only to show only page loads.
Please help me .
Apex Version : Apex 4.1
DB Version : 10g
Regards,
JitendraHide the loader element when the page has loaded. Put this in the javascript section
$(document).ready(function(){ $x_Hide('AjaxLoading'); });Or put it in the page load section
$x_Hide('AjaxLoading');Or create a dynamic action which fires on page load, select a hide action, and use a jQuery selector to target '#AjaxLoading' as an affected element.
Maybe you are looking for
-
Allow other users when upgrading from version 8 to 9
When I originally installed Parallels 8 I did not allow access to Windows to other users on my iMac. I am now upgrading to Parallels 9 and want to enable another user on my computer to access my Windows programs. Will I be prompted to allow other u
-
How the data is embedded in the image
please explain this code clearly !!! how the file is embedded inside the image and retrieved back !!! Private Sub btn4(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles NLabel4.Click Using O As New OpenFileDialog With {.Fil
-
Had binkiland malware, removed it, now on my website another window is opened
New laptop, with windows 8.1 while downloading one of the software programs i needed, got some malware. Binkiland was one of them, another one i can't recall name of. Got both removed after several hours. the binkiland was in registry, all over my pc
-
As before, G5 Mac, last version of Tiger, GoLive 7. With help here I think I've solved the table/cells template page to show thumbnails of portfolio pieces which will link to larger versions. All base-align on the left. These are my remaining questio
-
I am trying to learn ActionScript 3 and have been going through books trying to piece together knowledge. Today I thought I had figured some things out and attempted to put together a simple addition, subtraction, multiplication and division calculat