TS3159 says the url you requested is not responding

My iphone skips songs or pauses in the middle of a song, and sometimes i get these prompts that say The requested URL was not found on this server. any ideas on how to fix this problem?

It should work as soon as the site is published. To my understanding, you are trying to access a page which is not published yet.
I might be wrong here, but I get this message almost every time when trying to access something that isn't published yet.
Message was edited by: Erik Keller
Message was edited by: Erik Keller

Similar Messages

  • I recently had to swap out my iphone 4s and I am having problems restoring photos and videos from icloud.  I get a message on my phone that says " the URL you are requesting is not found on this server".  Pics and videos have been deleted too.

    I recently had to swap out my iphone 4s and I am having problems restoring photos and videos from icloud.  When I restored my phone from icloud, half of my pics and videos have been deleted, the pics that were restored on my phone are very blurry, and the videos won't play.  I get a message on my phone that says " the URL you are requesting is not found on this server".  I have erased and reset my phone twice, but every time I do it, more pics and videos are deleted.  I have backed up to icloud and iphoto, however, some of the pics are no longer on iphoto either.  Is there someway to get the videos to play on my phone again?  Make the photos not as blurry as they are now and to restore the pics and videos that have been lost?  I really would love to have them back, this phone is supposed to be the best and right now it doesn't seem to be.  Please help if you can.

    I too have noticed that once i restored from iCloud. Pictures blurry and videos wont play!
    Need help too!!

  • How do I view and open all my files again that are on my external hard drive?? Error message saying 'The disk you inserted was not readable by this computer' Three options are Initialize, Ignore or Eject.

    I have recently purchased Toshiba 1TB hard drive and I set it up and I was able to transfer all my files onto it such as my music, photos, documents. I had correctly ejected and used it again and all these files were safely stored and accessible afterwards. However after I rebooted my computer as it had been going slow and I had too much clogging it up once I reconnected the external hard drive I have error message saying 'The disk you inserted was not readable by this computer' Three options are Initialize, Ignore or Eject. How do I access all my files? I set it up to work on both mac and windows. I have tried both another mac and windows computer and same issue occurs?? I am worried that all my personal files are gone but am confused as the drive has had absolutely no damage to it as it was in a very short time frame and its never left the same spot. Any help would be greatly appreciated. Thanks

    Thanks for your quick response. I had a look at your discussion... I tried it on a Windows machine and I thought that was compatible with ExFAT?
    Therefore I need to attempt to use my external hard drive with a machine that boasts OS X 10.6.5 or above and then it should work?
    Thanks

  • I got an itunes giftcard for my birthday and when i tried to add it on my balance on my ipod touch it says the code you entered is not  recognized as a valid code. but i just got this card brand new for my birthday.

    i got an itunes giftcard for my birthday and when i tried to add it on my balance on my ipod touch it says the code you entered is not  recognized as a valid code. but i just got this card brand new for my birthday.

    Make sure you're using the correct code. For most iTunes cards, the code is under the scratchoff area on the back of the card. For more information, see this support article:
    http://support.apple.com/kb/TS1292
    If you can't get to work after perusing that page, contact the iTunes Store Support; instructions are at the bottom of that article.
    Regards.

  • I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears.

    I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears. What can I do to remove this error.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below on this page to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    { launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; crontab -l 2> /dev/null; } | open -f -a TextEdit 
    Step 4
    ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • I got an iTunes card as a gift and when I enter the code to redeem it I get a message that says "the code you entered has not been properly activated. Please contact iTunes..." Please advice.

    I got an iTunes card as a gift and when I enter the code to redeem it I get a message that says "the code you entered has not been properly activated. Please contact iTunes..." Please advice.

    what did itunes say when you contacted them?

  • Why does it say \'The disk you inserted was not readable by this computer\'

    I have been using an HP Photosmart Plus B210a printer for a year.  Recently I have many inconsistent printing problems, it's slow, in a queue, just doesn't move until I reboot - pull out plug, download again etc... anyway now it's defunct I'm steaming - shall I chuck it and buy another if so which - thinking of HP Envy 120???  Anyway when I try to use usb and not eprint a box pops up saying: The disk you inserted was not readable by this computer.  So here lies the problem, but I;ve changed cables and still it pops up.  What does this mean?  My Lion 10.7 mac OX is as new as the printer.  Please advise, before I go insane.

    Sounds like you are having a configuration issue with the software. Initially, my first response will be to completely remove the software from your computer and reinstall it using the software that HP makes available to download. Here is a link to that download :
    http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&dlc=en&product=4021935
    Have you also considered trying a different method of communication (e.g. wirelessly or using an Ethernet cord)? This might allow me to make better assumptions on where the issue lays if I know the circumstances which lead to it. 
    Let me know and have a great day! 

  • Sorry, the page you requested does not exist.

    I've been struggling for a couple of weeks attempting to get my domains hosted with my mobile.me account with little success. After trying about everything and I believe they have me blocked now on Chat support, it is now unavailable due to overwhelming interest in mobile.me. I've created my sites on iWeb and published them and when I go to view them I get "Sorry, the page you requested does not exist." Anyone have any ideas?

    Hi Mark,
    The site may have been unavailable for a short time. The links function correctly for me at the moment. Please confirm if you are still having this issue.
    Regards,
    Les

  • Why everything i try to do on itunes it says item not avilable the item you requested is not currently avilable in the U.S. store

    every time i click on itunes store or library or anything i choose to click on it says item not avilable the item you requested is currently not avilable in the u.s store but i did not request anything but to open itunesstore or check my library out im so frustrated

    Similar experience here but finally succeeded! Here's the summary
    Decided to (finally) update MacBook from SL 10.6.8 to Lion (it can't run ML or Mavericks) so this week purchased from UK Apple store. Received redemption code from Apple via email after couple of days and successfully redeemed this in Apps Store.
    Under Purchases in Apps Store clicked on "download" and nothing happened! Clicking on the app name "OS X Lion" gave the message "The item you've requested is not currently available in the UK Store". Contacted support but got no useful help there.....
    Following day went back to Apps Store and tried again clicking Download - still nothing (apparently - see below) so started thinking upgrade unlikely and £14 wasted.
    A little later noticed new icon in Dock and investigating it said downloading Lion - checked Activity Monitor and indeed my internet connection was being hammered. At a little over 4Gb got an error message saying download could not complete (needless to say not happy) and download icon disappeared!!
    So with nothing to lose reclicked Download in Apps Store and again no obvious activity and this time no new download icon in Dock - decided to check Activity Monitor again (just in case) and again high level of download activity! Maybe, just maybe, I thought and after about 90 minutes the Lion install screen appeared!
    Have now backed up the Installer and successfully installed 10.7.4
    I can't offer any explanation why it finally worked - Apps Store still shows "Download" not "Installed" as I would expect and the item is "..still not available.."!

  • Just upgraded to the latest version of iTunes. Now I get the message "the Item you requested is not currently available in the US store." When I click on OK, the dialgue goes away, but the store doesn't open. How do I fix this?

    Not sure why I am getting this message anyway. I wasn't trying to buy anything. I just upgraded and then I tried to access the store. I had two purchases that I had previously made from a different computer. I was going to download them to this computer as my iPod is synced to this computer and you can only sync it to one computer. I was able to view my account information and from there I was able to click on the Purchased link. I saw the two items and downloaded them. But I received an error about the second album. It said that I didn't have sufficient privileges. When I checked all the songs had downloaded. Only the booklet was missing. Maybe this has something to do with the issue, I don't know. As far as I know, I purchased everything from the US store. I don't even know how to switch to a different store.
    In any case, I can't access the store because the item I requested is not currently available in the US store. So why don't they just dump me at the home page instead of blocking me completely.

    It is working now. I no longer get the message about the item not being available in the US and I can access the store.

  • When I insert my Dvd-R it says The disk you inserted was not readable by this computer.Why is this happening ???

    When I insert my Dvd-R cd it saids "The disk you inserted was not readable by this computer." Please help
    thanks

    This is a blank disc?  A disc you burned?   Burned discs have a relatively high failure rate if you buy cheap DVDs.  I bought some Dynex ones once and about one in every four fails.
    Have you tried other DVDs to check if it is a drive issue?

  • I am getting an error that says the disk you inserted was not readable by this computer

    There was a recent software update to the computer but that is all. When I plug the drive in it reacts but then I get this error. I have been having horrible luck with my macbook and now I have several weeks of my semester projects on this drive that I can no longer access any help is greatly appreciated.

    This is a blank disc?  A disc you burned?   Burned discs have a relatively high failure rate if you buy cheap DVDs.  I bought some Dynex ones once and about one in every four fails.
    Have you tried other DVDs to check if it is a drive issue?

  • My iPad says the item you have requested is not available in the Uk store

    So I went to download Mr.jump and it did nothing so I closed the App Store and went back on it to find when I go on the featured section it said "the item you requested is not avabilble in the they uk App Store I've tried rebooting and it did not help.

    This message repeatedly appears whilst I'm playing a game which was downloaded a week ago from iTunes. I haven't accessed iTunes since. I'm using IOS 7.
    Any ideas, anyone? I've rebooted the iPad but it's made no difference. 

  • HP Laserjet P1102w by USB "The disk you inserted is not readable by this computer"

    My HP Laserjet P1102w used to work fine with OS X10.10. Then it started saying "The disk you inserted is not readable by this computer" whenever I switched it on, but the printer still worked. This morning it didn't. I uninstalled the printer, but can't re-install it - it isn't listed when I click "+". I have tried a different USB cable, and a different USB port - same message. The HP website does not provide a downloadable driver, as far as I can see. What do I do? (The wireless connection to the printer stopped working ages ago. The printer still works with our two PCs via USB.)

    Hi Shapley,
    Repairing the disk permissions can be done as following:
    1. Open the the Applications folder.
    2. Go to the Utilities folder.
    3. Double-click on Disk Utility.
    4. Select the hard drive containing the boot volume.
    5. Go to the First Aid tab and select Repair Disk Permissions.
    Note: This process may take several minutes depending on the Mac and amount of permissions that need to be repaired. The Progress Log will indicate when the process has been completed.
    Next reboot your Mac and try plugging the USB again.
    If the same persist, a such may also happen due to a conflict with the HP Smart Install feature which is Windows Based only and being wrongly read by the Mac, in order to resolve a such a Windows based PC will be required. any laptop should meet the purpose, the printer will be installed automatically by connecting the USB.
    Next update and install the latest firmware below:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-115794- 2&cc=us&dlc=en&lc=en&os=4158&product=4110396&sw_lang=
    Next follow the HP Smart Install Control Utility below: Select the Printer and follow the on-screen steps to disable the feature for the printer.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-129224- 1&cc=us&dlc=en&lc=en&os=4158&product=4110396&sw_lang=
    NOw plug the USB back to your Mac and check for any difference
    Please let me know of any change,
    Shlomi

  • "The disk you inserted was not readable by this computer" error message

    Hello. I've had my iMac for a little over three months and I've encountered a strange problem. I play Warcraft III, and whenever I insert the disk into the drive, I get an error message saying "The disk you inserted was not readable by this computer" and it gives me the options to ignore or eject. I've gotten the same message with Starcraft as well. I also tried putting in the iPod Nano install disk with the same result. CD-Rs and Audio cds work smoothly though. I called Apple technical support and they told me to call 1-800-MY-APPLE to schedule an appointment with my local branch to bring it in. I just wanted to make sure no one on these forums can help me. All help is greatly appreciated. Thank you very much.
    iMac (Early 2006)   Mac OS X (10.4.6)  

    Steve, the original poster made clear he was on a core duo iMAC which ONLY runs OS X (discounting non Apple OSes of course!)
    Therefore there is no extension manager. But I guess he would thank you for trying to help anyway.

Maybe you are looking for