TS3173 how can i do any of this if my screen is black and my keyboard will not function?

I have an iMac A1311 21.5 inch screen. I have installed Windows 7. It worked for 5 days. Now I push power button, hear the startup chime and the screen stays black. They keyboard or mouse do not appear to be functioning, therefore I can't reset PRAM or anything else.

Exactly how did you install Windows 7, did you use Boot Camp? If so then please re-post in the Boot Camp forum.

Similar Messages

How can i fix my iphone 4s ? the screen went black and wont turn back on.

ugh

Hi sandy,
Have you tried a reset? Hold down the Home and Power buttons at the same time for up to 20 seconds. Hopefully the Silver Apple will display, which will mean the phone is resetting (no data will be lost). As soon as the Silver Apple appears, release the buttons, and wait until the Home screen comes back on.
You should be OK after that.
Good luck!
Cheers,
GB

How can i install AppRadio application...i am in Tunisia and the application is not found in the Tunisian AppStore...it's essensual for piloting my Pioneer SPH-D01 AppRadio....please how can i get this application ...thanks

how can i install AppRadio application...i am in Tunisia and the application is not found in the Tunisian AppStore...it's essensual for piloting my Pioneer SPH-D01 AppRadio....please how can i get this application ...thanks

If it's not available in the store in which you have your account, you're pretty much out of luck. In order to purchase from the U.S. iTunes Store you need a)a valid billing address in the U.S., b) a credit/debit card billed to that address or an iTunes prepaid card purchased in the U.S. and c) to be physically located in the U.S. at the time of purchase.

How can I convert a pages color document to a PDF Black and White doc.

How can I convert a pages color document to a PDF Black and White doc. Or, covert the color to B&W in a new doc?

> How can I convert a pages color document to a PDF Black and White doc. Or, covert the color to B&W in a new doc?
The general idea is that you colour correct photographs once, archive, and convert with or without colour changes. The archived photograph is unchanged - or we would be colour correcting the same photographs again and again and again.
If you have a photograph with a corrected exposure, you can open the photograph in the Apple ColorSync Utility, apply a colour space conversion to a grayscale appearance using the preinstalled ICC profile, save the photograph under another name, and place that in your pagination.
If you have a paginated document with corrected exposures, and any such non-scalable bitmap or scalable spline graphics as you have chosen to add, you can render the pagination as a whole to PDF through the same ICC profile, carrying out the same colour space conversion on any and all objects.
Caveat: If you intend the pagination for certain processes, in particular offset lithography, then you are probably expected not to render the type to grayscale, but rather to render it to single ink solid black. No software can determine what printing process you intend, you have to understand a bit about printing, and how to set up general colour space conversions in software. Ask your prepress provider, and if the answer is not prompt and proficient, pick another provider.
/hh

How can I unlock my ipod touch? The screen is locked and has various languages on the sliding bar. It wont let you touch it

how can I unlock my ipod touch? The screen is locked and has various languages on the sliding bar. the screen is grey and the normal screen saver is gone.

As a first attempt, try a reboot by holding both the power and home buttons untl the apple logo appears and it restarts, ignoring the red slider if that appears.

How can I get an earlier version of pages? My OSX 10.6.8 will not support pages 5.2

How can I get an earlier version of pages? My OSX 10.6.8 will not support pages 5.2

You don't have it already, it has been out for 5 years?
Amazon is selling the iWork '09 DVD for US$19.99. A real bargain!
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=432&sid=2f9da28aad8d 3dda3cf6d2ba994e4ff6&mforum=iworktipsntrick
Peter

My Macbook Pro keyboard AND USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?

My Macbook Pro keyboard and USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?
This is quite frustrating, since it randomly occured as I was browsing the web. It seemed to happen out of nowhere. I cannot login to my user account because I cannot type my password.
Any help will be appreciated.
-Matt

If you have another Mac, boot the non-working one into Target Disk Mode (holding down "T" at startup). Hook up the two Macs via a Firewire cable. The non-working one will mount on the other Mac as an external Firewire HD.
Next, download the 10.5.6 Combo update from here:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056comboupdate .html
Run it. When it asks you for a destination, choose the other Mac that was mounted via Firewire. When it's done, unmount the computer and restart it. The keyboard and mouse should work now.

My ATV light keeps flashig and the unit will not work. Any sugestions?, my ATV light kees flashig and the unit will not owrk. Any sugestions?

my ATV light keeps flashig and the unit will not work. Any sugestions?,

Sounds like an update gone wrong.
You need to restore:
Apple TV (2nd and 3rd generation): Restoring your Apple TV
If you've not tried unpowering and restarting that's always worth a shot.
AC

How can i get my IPhone 5C to sync with my computer? My phone will not pop up in devices (after connecting via USB to my iTunes) How can i sync my music?

How can i get my IPhone 5C to sync with my computer to download music?

Hello, sherlockian17.
Thank you for visiting Apple Support Communities.
Here are the best two resources I could find that would walk you through the syncing process.
iOS: Syncing your data with iTunes
http://support.apple.com/kb/HT1386
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
If your device is not recognized in iTunes, see the article below.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Hope that helps,
Jason H.

How can get my ipad to turn on when screen is black?

Screen is black on my ipad and it won't turn on.

Try resetting your iPad. Hold down the sleep and home keys for about 20 seconds. See if you can force it to reboot. If it works. you'll see a silver apple. If so, let go and let it finish.

Home Sharing will not work with my Windows 8 64bit with new itunes. All of my Apple TVs will not see my library and my iphones will not function with the "Remote" App. They all did before. Only thing that has changed is new PC/itunes. Any Ideas?

Installed a new Windows PC on my home network. PC is Windows 8/64bit. with latest version of itunes 11.1.4.62 for 64bit. My itunes works, but I can not get Home Sharing to function now. None of my Apple TV's can see my computer library and prompt me to turn it on. All of my iphones, pods, pad, can not use the "Remote" app. When you prompt your phone in Remote App to "add library" and you get the code....iTunes doesnt give you the remote screen where you can enter the code. I have reloaded iTunes, reset my router, updated all devices. You can turn on "Home Sharing" on iTunes, but then it closes and doesnt seem to link my devices like it use to. Also, when the new version of iTunes is up on my PC, you can see the other devices to AirPlay to like you could before. However, I can send items from my iphone to stream to an Apple TV, I just cant link them all like I could before and control the music playing to multiple Apple TV. Growing fustrated. Any ideas, would be helpful.

Cunning1_
You are a legend!! I have spent countless hours uninstalling, reinstalling itunes, playing with firewall settings, reading articles on this problem!! I only have to un-sync my iphone 5 and then the airplay icon magically appeared!!! Maybe I have too many devices syncing via wi-fi, or maybe it is the Iphone syncing??
Whatever - one step and now I can enjoy my music through my house again!
Thank you, Thank you, Thank you

HT201274 My new iPad (2) had a message that the iOS called Voice Over was running, everything locked up then went black and now it will not power up. I have plugged it into a power supply & still won't work. Any ideas?

My iPad2 has a message that iOS called Voice Over was running, tap three times to turn off. Nothing will respond, it finally turned black and now iPad won't turn on at all. Any ideas?

Thanks so much but none of that helped. It was driving me crazy because it would back up another external drive. I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
Thank you for your help and replying to this. Guess I made my own issue!

How can I get rid of this security warning for files on CD? Usual answers not working.

Hi all,
I have Acrobat X Pro patched to 10.1.8 on Windows 7. I am trying to create and use a CD with a set of hyperlinked PDFs on it.
Whenever I click a link in any of the PDFs, the attached security dialog comes up. The box being ticked doesn't matter, Acrobat doesn't add anything to its list of websites in Trust Manager. I have added D:\ to the list of privileged locations in the enhanced security preferences. In fact, I have tried turning off enhanced security altogether, and even that didn't work. I have also tried both "Allow access to all websites / Default behavior: Allow Access" (which irritatingly reverted to "Allow access / Always ask" BTW) and "Custom / Default behavior: Always Ask" in the Manage Internet Access preferences under Trust Manager. Trust Manager won't let you add local paths.
I can change the PDF files too if it's something to do with the type of hyperlink between them. They're relative links to other files in the same directory created using Word and then converted to PDF with Acrobat PDFMaker.
Thanks
Drew

It's possible that the file that any path points to may be changed, but it appears Acrobat happily accepts those other paths.
If that is really intended behavior as built, is there a way to fool Acrobat that a given disc isn't removable media?

How can I get my HP Photosmart 210E to print on black and white or grayscale only.

I have tried to several times change my advanced settings under preferences to grayscale only printing and I continue to get color prints. what can i do to correct the problem. I do not see a message that says apply only OK when I change the settings to grayscale

Hi there feranski,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

We recently cannot open Mozilla FireFox browser, even with Internet connectivity. We can open Internet Explorer. How can we re-install (or do we re-install) when it appears that Microsoft will not allow us to download and execute. Thanks.

See question above

Same problem here. Win7 32.
Only the process appears, but no browser window.
Just a wild idea i had. I do have one other issue with the same computer that also shows the 3.6.4 problem. It has to do with the folder app in Picasa. I mean the one where one can decide which folder needs to be scanned or ignored and so forth. Every time I start this Picasa freezes instantly. I tried numerous things already. Perhaps both those processes are somehow somehow connected. Just a wild guess though.
I will send the debugging info over the weekend.

TS3173 how can i do any of this if my screen is black and my keyboard will not function?

Similar Messages

Maybe you are looking for