TS3173 I am trying to install Windows 7 Ultimate on my iMac 21.5 inch

i could install it till the stage where windows registers its components for the first time and later on i'm not able to see anything its showing black screen and I'm not upgrading windows im installing a fresh copy.
following is my system configuration
Processor 3.06 GHz Intel Core i3
Memory 4 GB 1333 MHz DDR3
Graphics ATI Radeon HD 4670 256 MB
Software OS X 10.8

Well believe me, when I say iMac has a problem with Windows graphic drivers that need to be uninstalled.
And from the Boot Camp Support page, there is one for iMac but I thought that was only some models.
Troubleshooting
iMac displays a black screen during installation of Windows 7
And burning ISO to DVD does and will cause trouble which is why I mention it. Does not matter if it is a fresh copy, in fact it would have to be.
Too many users try to install iwth just 20GB and then the first updates run out of partition space lacking the 10-15GB temp space needed.

Similar Messages

Stuck trying to install Windows 7 Ultimate on X120e (Help please)

I just got my x120e yesterday and it came loaded with Windows 7 Home Premium. Since my college offers free Windows 7 Ultimate I decided I would go ahead and install that, plus since I bought the computer used I figured that would be a good clean start. So I downloaded the software and used the windows tool to put the .iso file onto a thumb drive.
When booting the x120e with my thumbdrive inserted it goes into the windows installation guide. The problem starts where it asks how I want to do the install, Upgrade or Custom. From the directions online and using google it seems I am suppose to select 'Custom' install. Then it asks where I want to install windows: Disk 0, Partition 1(system_drv); Disk 0, Partition 2; Disk 0, Partition 3(lenovo_recovery). When you highlight Disk 0 Partition 1 or 3 it says 'Windows cannot be installed to ...'. Disk 0 Partition 2 includes the bulk of the storage size, but when I highlight that one and click 'next' it comes up and says 'Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information'. Also, I am unable to find anything called 'setup log' to get more information.
* I did format the Disk 0 Partition 2 after it didn't work the first time
I decided from googling that maybe I needed to add a hard drive driver in order for it to work. So I went to the Lenovo driver page on my other computer and put that on the thumb drive and loaded the driver in the windows install wizard. This had no effect though and the problem is still there.
Given I've never loaded an OS before so I'm relying on online instructions and google. I have literally spent close to the last four hours working on trying to install Windows 7 Ultimate onto the x120e and am going to get some sleep and try again I guess.
* I haven't changed the hard drive or anything, this is using the original 250gb hard drive it came with
UPDATE: after getting a reply to this question on another forum, they said "Delete all the existing partitions you see. Start the install on the unformatted partition. You will lose your recovery partition (the lenovo setup with Win 7 Home Premium)."
So I did that and now the only line that shows up is Disk 0 Unallocated Space, 232.9GB. However when I click Next the same warning appears as before "Setup was unable to create a new system partition or locate an existing system partition...". Additionally the options of Delete and Format are no longer there, only Refresh, New, and Load Driver. Any more help on what to do? thanks

http://www-307.ibm.com/pc/support/site.wss/TVSU-UPDATE.html
This program will download everything you need automatically.

Trying to install Windows 7 Ultimate on a MAC Mini

I originally installed Bootcamp from the MAC Min and downloaded all the tools associated with it. I ended up having to xcopy the Windows 7 Install disk to a USB Flash drive. When it came up it started to load and go to the point where it wanted me to select the partition. I selected BootCamp; and it started to load then it came back and said the Partition needed to be formatted at NTFS so I droped back a step and formatted the BootCamp Partition as NTFS. Now I can't get anything to load and it just sits there with a flashing cursor in the upper left corner.
I was trying to help a friend out and now it appears the MAC Mini is screwed up and I can't get it out of the flashing cursor.
Any ideas (besides having to reformat and start over) or any tricks to get it back to where it was before bootcamp?
Please HELP!!

Not really sure what to say except that it worked perfectly on my MacBook Pro. Like you, I need to update my Certs. I have a working SQL Server wherever I go w/o need to buy another laptop. I installed from DVD.
good luck.
Windows Server 2012

Hi All, newbie here, trying to install Windows 7 on my new iMac, heaps of trouble?

I get to a point where I choose the Bootcamp partition and the error message comes up: Windows cannot be installed to this hard disk space. Windows must be installed on a partition formatted as NTFS.....

Roger
Thanks for the response. I am having heaps of fun here. Got a printer working and printed out the Bootcamp help, which I followed slavishly to no good end. I partitioned the disk, burnt a cd with the Bootcamp data. The Windows 7 loaded as far as the choosing partition to install. The instructions say to go with the Bootcamp partition Disk 0 Partition 3....then I have just read on the next page and it says I choose "format"...so it looks like I have answered my own question. I was clicking on "Next"!!!
Bit dim on a Sunday afternoon here...
Cheers from the great South Land.
Richard

HT1199 After trying to install window 7 my new iMac will not reboot back to apple. Black screen "No bootable device -- insert boot disk and press any key". How do I get out of this?

After trying to install Windows 7 in my new iMac It will not boot up back to Apple. I have a black screen with the following "No bootable device -- insert boot disk and press any key". My iMac did not come with a boot disk. What can I do?

Try holding down the option/alt key during a restart and see if you can see/select your boot drive there.

Install Windows 7 Ultimate 64-bit via Boot Camp

I am using a 17" MacBook Pro with and Intel i7 2.66 GHz processor, 8GB 1067 MHz RAM and a 7200RPM 500GB hard drive. I am trying to install Windows 7 Ultimate 64-bit via Boot Camp. I do what Boot Camp tells me to do, but when my MacBook Pro restarts to boot from the Windows 7 disc, all I get get is a white screen! I have tried to boot manually from the Windows 7 disc, but it won't boot. It freezes on the white screen and I have to reboot the Mac using the Mac OS X partition. How can I fix this ASAP so I can install Windows 7? I need to get it done TONIGHT! I just found out that I am running the 3.0.2 version of boot camp on my Mac OS X 10.6.4 version. Is this the problem? Do I need to update my Boot Camp Utility? If so, how do I do it or do I have to install Windows Vista first since the update is a .exe file?
Message was edited by: The Elite Technician

The Elite Technician wrote:
It is the Windows 7 64-bit disc that came with my Dell a while back, but I no longer have that Dell. I have also tried using my Vista Ultimate 64-bit disc and my Windows XP Pro SP3 disc, but none of these worked. Same result - white screen. All of these discs came with my previous PC computers that I used to have, but I no longer have those PCs. Only their discs. Is using discs that came with other computers for those computers the problem? Do I have to use a Windows disc that has not been used before?
Message was edited by: The Elite Technician
The disks that come with PCs most often include only the drivers and applications required by the PC they were made for. You can not use these disks to install on other than the original hardware.
Message was edited by: BobTheFisherman

Installing Windows 7 Ultimate 64-bit with Boot Camp

I am using a 17" MacBook Pro with and Intel i7 2.66 GHz processor, 8GB 1067 MHz RAM and a 7200RPM 500GB hard drive. I am trying to install Windows 7 Ultimate 64-bit via Boot Camp. I do what Boot Camp tells me to do, but when my MacBook Pro restarts to boot from the Windows 7 disc, all I get get is a white screen! I have tried to boot manually from the Windows 7 disc, but it won't boot. It freezes on the white screen and I have to reboot the Mac using the Mac OS X partition. How can I fix this ASAP so I can install Windows 7? I need to get it done TONIGHT!

I'd recommend posting this in the Boot Camp forum, this is a general MBP forum.
Regards,
Roger

Installing Windows 7 Ultimate Edition on a Late 2013 15" MacBook Pro with Retina Display. (Top Spec)

All,
I am trying to install Windows 7 Ultimate Edition on my Late 2013 MacBook Pro with Retina Display. I am using the .iso file/USB stick method of installation because I don't have access to my original Windows 7 DVD. I have the top specification model with all of the max upgrades. The problem I am having is when I get to actual installation of the Windows 7 software, it can't find the drivers I need to complete the installation. Any tips or suggestions?

I thought about doing what you said above, but unfortunately, I didn't have any spare blank DVD's. However, I was able to sucessfully install Windows & on my Mac. What I did was when I got to the error message, I would cancel the installation and that would return me back to the install now window. At that point, I would take out the flash drive and put it into another USB port. It took a few times, but eventually it recognized the drivers and allowed me to install the software. Remember, once you get past that point, the installation will ask you to choose a drive to install Windows on. Highlight the Boot Camp drive and chose "advanced", and then chose "format" after that. After all of this, it should be smooth sailing.

Anyone successfully installed Windows 7 x64 Enterprise on iMac running OSX 10.9.3?

I am trying to install Windows 7 x64 Enterprise onto IMac (late 2013 model) that has Maverick OSX 10.9.3 installed. We have done this in the past, before upgrading to 2012R2, and using 10.9.2 OSX.
When I create the TS media using x64 WinPE, insert into the IMac and boot - the boot selection pulls up. I select the USB EFI boot (only one that loads and it starts running WinPE and pulling up the Task sequence selection. I think the issue
is with the partition table. Before installing Windows - I exit with F8, run diskpart, which shows 3 primary partitions. I add a 4th and format as NTFS. I now have 4 primary partitions - none that show as EFI. The TS starts, checks
requirements, and tried to download the preinstallation environment to the disk as the TS tells it to install to disk 0, part 4 with no formatting and fails with 0x8007000f.
If I use diskpart to clean the drive and boot with the USB to EFI, let SCCM select Bios or UEFI, it will detect to UEFI, download the PE environment and apply the OS. When it reboots, it does not recognize the hd, showing a flashing folder.
Any help or comments are appreciated.
Thanks
Zander.wheels

Hi,
I recommend you use Boot Camp to create partition.
Boot Camp is a multi boot utility included with Apple Inc.'s OS X that assists users in installing Microsoft Windows operating systems on Intel-based Macintosh computers.
http://en.wikipedia.org/wiki/Boot_Camp_(software)
http://support.apple.com/kb/HT3986
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I am trying to install windows 8 at my macbook air boot camp

I am trying to install windows 8 at my macbook air boot camp but Boot Camp Assistant i showing an error that the disk cannot be portioned because some files cannot be moved. Back up the disc and use disk utility to format it was a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistant Again.
I had already installed teh first time Windows on my MacBook Air and Mac Book Pro. Actually I had more issues to install on the pro than Air.
But my Macbook Air had an issue on November 2013, 3 weeks after buying it and Apple gave me a new MacBook Air but they only transferred the information on my mac and the windows partion was lost according to them, they could copy it in to my new MacBook Air. Now that I am trying to install my windows I can not access to the aprtion section and get the error message from above.
What can I do to to install it? I am using a 32GB USB and OEM Windows 8 at USB External Drive. The same I used before. I dont know understand what changed if I did it before?
Please advise..

I think there's some remmants left over from when Apple transferred stuff over. We can try a quick fix, but if that doesn't work, I think the only option is to clean install OSX and then install Windows.
open disk utility, confirm that you only have 1 partition (mac journaled)
restart and PRAM reset
open disk utility and repair permissions twice
restart boot camp assistant
Does it work?
If not, I would boot holding command+R, choose disk utility from the menu and completely erase your HD (formatting it as mac journaled again). Then, install OSX on this HD. Once OSX is installed, don't copy your files over from the backup yet. Instead, start boot camp assistant and see if you can get Windows installed. You can copy back your other files after we get Windows installed.

HT201456 I have tried to install Windows 8.1 64 on my new Mac Book Pro from a full install disc.

I have tried to install Windows 8.1 64 on my new Mac Book Pro from a full install disc. When I get the the choice of partitions to install Windows 8.1 on the Windows installer says that the Bootcamp partition is not valid.
Has anyone encountered the same issue?

BCA creates the partition as FAT, which the installer needs to format.
Please see https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2 for reference. Where does it break in your case?

Trying to install Windows 7 with Bootcamp on my Macbook with a faulty CD drive

I am trying to install Windows 7 with Bootcamp on my Macbook A1278 (OS 10.6.8) with a faulty CD drive (CDs and DVDs get stuck in it and I had to get it removed in an Apple store, so I don't want to use it anymore). I have got a licence for the product but I am only in possession of the ISO, is there any way to install it using a USB stick?
I don't have many options while launching Bootcamp, only
"Download the Windows support software for this Mac" but when I try I get a message explaining me that the download could not continue as the software is not available,
or
"I have the Mac OS X installation disc [...]" but obviously I can't use my CD drive so this is not an option. I tried it anyway and I created a Windows partition but when asked to "start the Windows installer", I can only continue by insering a CD.
I tried to use a USB stick and added the ISO on it but nothing has changed.
How can I install my copy on Windows?...

BobTheFisherman > Hem, yeah, that is stating the problem and not working toward resolving it.
Turbostar > I checked the link and it seems to be relating to the first video I have seen on the subject. I tried to install Tuxera then to work with rEFIt, but I did not get any result yet (I don't know if I am doing something wrong during the USB writing process as many different ways are explained on different websites).
So far my last try was to launch Windows 7 USB DVD Download Tool on VMware Fusion but it the only disk shown is A:\ Removable disk (not the name of my USB) and it is stated that the disk is being used by another program, even though it's not open on the Mac side.
Some websites are advising to write the copy of windows on a USB via a PC and then launch it on the Macbook, so I might try that in the next few days. I will keep you updated.
If anyone has another option I might not have think about, or an advice on how to efficiently create a bootable Windows setup USB with my Mac, please let me know!

I get an error message when trying to install windows 7 on my macbook pro. The message says "windows has encountered a problem communicating with a device connected to your computer. I don't have anything connected to my computer. How do I fix this?

I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I am using windows 7 professional install disc. I can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?

Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
"P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

I am trying to install windows on my mac via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available.

I am running OSX 10.6.8 Snow lepard I am trying to install windows on my intel imac 20in late 2006 via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available. I bought the Imac secend hand and did not get the install dvd's with it What can I do?

You don't need to download the Windows support software, because in Snow Leopard, they are only available as a download for the Late 2010 MacBook Air.
Instead, you have to buy Mac OS X Snow Leopard. The Snow Leopard disc contains the Windows drivers for your Mac, so you have to install them after finishing the Windows installation

Hi i am trying to install windows to my macbook through boot camp and i get this message Can't install the software because it is not currently available from the Software Update server.!!!what can i do???please help me!

Can't install the software because it is not currently available from the Software Update server. this is the message that i get a few days now that i am trying to install windows through boot camp to my macbook!does anybody knows what i can do????

You keep it on the usb stick for after you boot into Windows. From Windows you install the Windows Support software on the stick. Do you realize that you need to buy and install Windows? The Windows Support software you downloaded is only the Windows drivers for your hardware.
Read the Boot Camp installation instructions and help guides located here: http://www.apple.com/support/bootcamp/

TS3173 I am trying to install Windows 7 Ultimate on my iMac 21.5 inch

Similar Messages

Maybe you are looking for