TS3195 I am able to see my iphone 4 as a drive on my win8 pc, but am not able to see my ipad air. This allows me to copy files from my iphone to my pc. Why not?
When I plug my iphone inot a USB port on my windows 8 computer, it apperars as a device and I am able to see and select photos co copy to my win8 pc. When I connect my new ipad air, it does not appear. Why not?
Thanks again.
I had photos taken with the ipad air on the ipad air.
I followed the instructions in the link you gave, for Windows 8 PC
Step 5 says to right click on the logo for my device.
I could not find a logo for the ipad air and was unable to click on "improt pictures and videos", since there was no logo.
Below are two screen captures. The first is for my ipad air and the second is for my iphone. It looks like my Windows 8 OS can see the iphones as a portable device, but cannot see the ipad air in the same way.
Similar Messages
-
I have bought a new iPad air, I decided it to restore it from the last iPhone 5S backup, and now it's asking me about two iCloud accounts I never heard of in my life. WHY?
The iPhone and iPad draw whatever charging current they require. The iPad draws more.
-
Itunes is continuously copying files from my iphone
My itunes seems to continuously be stuck copying files from my iphone. it's been going on for over an hour now. Please help.
i tried every way possible, please see this attached screenshots, i think something is wrong with itunes installation. please help
-
I have iPhone 4s. I downloaded iTunes to my PC and when I connected my iPhone to the PC iTunes showed a message that my device's time limit has expired. So iTunes doesn't allow me to transfer files from my iPhone to my PC .
Carmell-
When I've had a similar problem, it was because I was accessing the iTunes store from a device I hadn't used before, such as when I upgraded from an iPad 1 to the iPad 2. It was a little confusing to me until I figured it out.
All I had to do was use the ID of my existing account and play along with the iTunes store. As I recall, it asked for my password twice, and the security code from the back of my credit card. After that, downloads proceeded as before.
Fred -
I want to install a new hard drive on my 2008 MacBook but do not have the instillation discs that came with my computer. Can I use instillation discs from a 2009 or 2010 MacBook? The hard drive I am planning to install is a WD Scorpio Black 500GB SATA 2.5'' internal hard drive.
Sometimes they do work - i've done it before. I have a late 2008 Macbook Uni and used the install dvd of my 2009 Macbook White and it worked.
Why not just clone your hard drive? It'll save you a lot of time doing a clone rather than doing a clean install.
Unless you're having issues with your old set up or your old hard drive is dead.
You can download Carbon Copy Cloner - install your new hard drive in a external usb enclosure (around $10) and clone fromt here then test it before you install it in your Macbook.
Once you've done the swap, you can install your old hard drive in the USB enclosure and use it as a backup drive.
Good luck -
Why Can't I Copy Files from an External Hard Drive or SD Card?
Major problem here... Why when I try copying files from an external hard drive or an SD card onto my internal iMac hard drive, it doesn't work? The status bar that pops up, shows that it completes the transfer of the files to 100%; however, when it does in fact finish, the files actually do not appear on my hard drive.
Any help would be greatly appreciated. This is one of many problems I have been finding with OS X Lion and am very much on the verge of going back to Snow Leopard.
Thank you.Have u tried the usual? Safe boot. Delete finder plist files? etc. And the drives are formatted for mac yes?
-
tell me please when i copy files from downloads it will be a new file with new capacity? i mean if a file is 2 mb, when i copy it it will be new 2mb ?
If you copy it to another folder, e.g., Documents, and you can see it in the Downloads folder then you now have two copies of the file. If you delete one copy, the other stays intact. If you keep both, there is no harm, although the amount of disk space used is twice as big as when you only keep one copy.
-
Why cant i copy file from my macbook to my portable harddrive?
i just bought a new macbook. i'm kinda newbie. i tried copying file from my macbook to portable harddive. it didnt work. can anyone tell me why? by the way, my harddrive is NTFS system. the funny thing is that i can copy file from my harddrive to my macbook.
thanks for the kind soul out there.
mac book Mac OS X (10.4.9)The easiest way around this is to reformat the external drive to be FAT32 if you want to use it with other PCs, or HFS+ if you only want to use it with Macs. You will lose all the data off the drive when you do this.
You can reformat the drive using Disk Utility. -
I have a mid-2010 27" Quad Core i5 iMac running 10.8.3. Startup disk recognizes the primary hard drive as a startup volume but will not boot from it. Have tried zapping PRAM, ran disk utility. No errors reported Any thoughts?
My bad Eric. The startup preference recognizes the primary as a 10.8.3 startup volume but when u select it the system does not boot. I can only boot from my external backup drive
-
"I have one workstation with static IP, Wants to create batch file to log in to this,using user name and password, copy back up files from that workstation to my desktop with batch file, please help
I am currently using batch file for back up for domain servers with robocopy commands in batch file but one of the workstation is not in domain and has static ip , also it has username and password,
Wants to create batch file on my desktop to log in this server---with username and password,, copy files from particular folder and paste it on my desktop in particular folder or auto create that folder,
please help, "
P DaveJRV,
I can understand that, 1stly I am not a scripting guy, I know very very basic of this,
2ndly, I need help , I am not asking anyone here to write code for me, I have already wrote that but its not doing which its suppose to do,
check below screen shot, after running suggested script, it has mapped drive ,
now I do not want to do that, I want just files to copy from that machine to my machine, and want script which I can run from any PC,
Tried with UNC PATH as well, but not making any difference, its keep mapping that server drive to my computer
P Dave
JRV,
I can understand that, 1stly I am not a scripting guy, I know very very basic of this,
2ndly, I need help , I am not asking anyone here to write code for me, I have already wrote that but its not doing which its suppose to do,
check below screen shot, after running suggested script, it has mapped drive ,
now I do not want to do that, I want just files to copy from that machine to my machine, and want script which I can run from any PC,
Tried with UNC PATH as well, but not making any difference, its keep mapping that server drive to my computer
P Dave
Bill - he still sees that "connection" although it isn't mapped it is attached temporarily.
P - Log off and log back on and the attached connection will be gone. It is temporary. Again - knowing the basics of WIndows would let you know this.
We have given you all of the answers that are possible. There is no other way unless you have installed things like PowerShell and PowerShell remoting or an FTP server.
If you do use a drive it can be just as easily deleted after you have finished the copy.
Again: "NET USE /?" will tell you all of the options.
Saying you know nothing is not an excuse for not thinking or looking more deeply into the suggestions made by those trying to help you. This is not a MIcrosoft support forum or help desk. It is a forum for admiinistrative scripting and assumes
that those coming here are technically trained or experienced in the basics of Windows technology.
¯\_(ツ)_/¯ -
I have a IPad Air and when I download any game from Big Fish the game will not open to play . I have tried everything to get the games to work - reboot, delete, restart my IPad everything. I can download games from other places like G5 games play fine. I have connected Big Fish and they told me that they tried the games I was having trouble with on a iPad air and the games play fine - don't get it . Can anyone HELP
Hi, joannfrommontgomery.
Thank you for the question. I would recommend going through the steps in the article below. If the issue persists and your devices OS is up to date, I would recommend contacting the developer of the app.
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/ts1702
Cheers,
Jason H. -
Copying Files From a Remote Machine through "rcp" command not working.
Hi All,
I'm a new comer to this famous forum. I was trying to go through the PDF "Solaris Advanced User's Guide" .So in chapter 9-"Using the network" i came across "Copying Files From a Remote Machine". And the syntax was "rcp machinename:source destination" . And i got another note. It is like
"The rcp command enables you to copy files from one machine to another. This command uses the remote machine's /etc/hosts.equiv and /etc/passwd files to determine whether you have unchallenged access privileges. The syntax for rcp is similar to the command syntax for cp.".
But i maintained remote machine's IP address in my system's /etc/hosts file. But still i am unable to do the rcp from remote system to my system or vice versa.
Always i am getting error message " **Connection refused**".
Therefore please some one guide me how to perform the " Copying Files From a Remote Machine" through rcp command.
Reghards
KartikHi
The inconvenience of using scp is that you have to type the password every time you stablish a connection. You can work around this, adding a key into the remote hosts_allow file. This implies in more maintenance.
From the rcp man page:
+rcp does not prompt for passwords. It either uses Kerberos authentication which is enabled through command-line options or your current local user name must exist on hostname and allow remote command execution by rsh(1).+
From the rsh man page:
+ If you omit command, instead of executing a single command, rsh logs you in on the remote host using rlogin(1).+
By default, rlogin is disabled on Solaris 10
[SunOS 5.10/bash] root@wgtsinf01:/store/sun/operating-systems
# svcs -a|grep -i rlog
disabled May_11 svc:/network/login:rloginSo, to use rcp you have to enable the rlogin service and set up all the configuration files. Particularly, as already suggested, I too suggest you to use scp. :)
Cheers
-- Andreas
Edited by: Bank_Of_New_Zealand on 15/06/2009 13:09 -
If I have both my iPhone and my iPad set up on the "Find iPhone" app, and I disable location services on my iPhone, will I still be able to track my iPad from my iPhone by using this app?
iWork is universal, so it will work full-res on the iPad. This is true for any app which has the plus sign symbol (in the App Store in iTunes it will say "This app is designed for iPhone and iPad".
Matt -
An issue that has come up over and over again on several FrameMaker and Acrobat/PDF email lists as well on the corresponding Adobe User-to-User forums is that of creation of PDF files. FrameMaker 5.5.6 and 6 have what looks like a convenient feature that is supposed to allow you to create PDF files via simply saving the document as a PDF file. I have gone on record as advising end-users not to use this approach for reliable creation of PDF files from FrameMaker documents under Windows and MacOS with FrameMaker 6 and earlier. Why do I most vociferously offer this advice and why doesn't the problem get fixed? And how SHOULD you create PDF files from FrameMaker?
GOOD NEWS
I will start with the good news. The "next major version" of FrameMaker will indeed have "save as PDF" re-implemented in a manner that it will be as reliable as printing to the "Acrobat Distiller" printer instance under Windows or the "Create Adobe PDF" desktop printer under MacOS. I am personally working with the FrameMaker development organization to make sure this really happens and is fully and properly tested and debugged! Furthermore, this next major revision of FrameMaker, unlike FrameMaker 6, will come with a Distiller installer that will properly install the "Acrobat Distiller" printer instance under Windows and the "Create Adobe PDF" desktop printer on the Macintosh (of course assuring that the latest PostScript driver is also automatically and correctly installed).
DON'T USE "SAVE AS PDF"
But what's wrong with "save as PDF" as currently implemented?
The following are some of the SYMPTOMS reported over the last few years by FrameMaker users that were traced back to use of "save as PDF" under FrameMaker:
(1) No PDF file is produced at all, possibly with a log file showing not-readily apparent PostScript errors during distillation.
(2) The PDF file "loses" color in images. All or some images (raster, bitmap images, NOT vector artwork) appear in the PDF file in grayscale.
(3) The resultant PDF file is on the wrong paper size, i.e., the document's logical page size does not match the output page size as seen in Acrobat or Acrobat Reader.
(4) Some or all text in the resultant PDF file is blotchy looking or overly bold.
(5) Some or all text in the resultant PDF file cannot be searched or indexed.
(6) Some or all text in the resultant PDF file appears in Courier or in some other substitution font.
(7) Interword or intercharacter spacing is a bit irregular in the resultant PDF file.
(8) Content is missing in the margin areas of the page, i.e. you cannot do full-page bleeds.
(9) Some or all page content is missing (other than margin areas).
(10) Relatively inefficient PDF is generated.
If this list by itself isn't enough for you, please note that some of these symptoms are very subtle and may escape attention when the PDF is first viewed or printed. Oftimes, it is when one attempts to manipulate the PDF file in Acrobat or repurpose its content or even view or print on a system other than the one on which the PDF file was created, that some of these symptoms make themselves obnoxiously visible (or invisible in some cases I won't make any bad jokes here about graphic examples!).
It is important to understand that FrameMaker does NOT have its own native ability to create PDF. Any and all PDF created from FrameMaker documents is actually done by creating PostScript via the PostScript driver and having the Acrobat Distiller create PDF from that PostScript. The only exception to this is creation of PDF via the Acrobat PDFWriter driver, which is likewise not recommended (see below).
In order for "save as PDF" to work correctly, FrameMaker must do the equivalent of calling Printer Setup and selecting the "Acrobat Distiller" printer instance under Windows or the "Create Adobe PDF" desktop printer under MacOS followed by setting the driver's options correctly for paper size, page range, etc., followed by sending the proper commands to the driver to create PostScript.
Contrary to popular belief, PostScript as generated by the Windows and MacOS PostScript drivers is VERY device-dependent. The information in the PPD file associated with a printer driver instance provides critical parameters for generation of PostScript including:
Whether the printer supports color (Acrobat Distiller does)
What PostScript language level is supported (Acrobat Distiller 4.x and Acrobat Distiller 5.x are both PostScript language level 3)
Whether native TrueType support is available (Acrobat supports native TrueType as Type 42 fonts)
Available binary communications (Acrobat Distiller supports pure binary and ASCII, but NOT TCP, TBCP, or PJL)
Resident fonts (Acrobat Distiller doesn't really have resident fonts)
Available paper sizes and custom paper size availability (Acrobat Distiller supports a wide range of predefined sizes and continually variable "custom" sizes up to 200" by 200")
Margins / printable areas (for PDF and the Acrobat Distiller, there are no margins in which imaging is not permitted)
Device resolution (Acrobat Distiller can be set to any value from 72 to 4000 dpi; as a convenience, the Acrobat Distiller PPD provides a series of values for use by the driver. Since there is no inherent "resolution" of a PDF file, this parameter is used only for purposes of allowing PostScript programs that query for such a value to be satisfied and for the driver to be able to communicate this value to the operating system and/or application as required.)
Paper handling (totally irrelevant to Acrobat Distiller if input or output tray selection via "setpagedevice" is found in the PostScript stream, it is ignored by Acrobat Distiller)
Thus, if the wrong printer driver instance is selected (i.e., it isn't associated with the Acrobat Distiller PPD file) or that driver instance is improperly configured, improper PostScript will result and one or more of the symptoms described above can occur. As currently implemented, FrameMaker depending upon version will not necessarily choose the correct printer driver instance and/or correctly parameterize the print job via driver setup options. In fact, FrameMaker 5,5,6 might even try to generate PDF via calling a PCL driver, FAX driver, or even a non-PostScript inkjet printer!
DON'T USE PDFWRITER
The Acrobat PDFWriter is a relic of older versions of Acrobat. In fact, it is no longer installed by default in the "easy install" or the "typical install" of Acrobat 5. It hasn't really be updated since Acrobat 3 and only supports PDF 1.2. It is a GDI (Windows) / QuickDraw (MacOS) driver that directly generates PDF without any intermediary PostScript. Since it is not a PostScript printer driver, applications cannot pass through EPS graphics and/or PDFMark information (used for a wide variety of purposes by FrameMaker). For EPS graphics, most applications will send the low resolution TIFF (or PICT) EPS header in lieu of the PostScript text, if they send anything at all, to the driver. Forget about links, structure, or any other PDF "goodies." Expect that PDFWriter will fully "bite the dust" in the next major version of Acrobat.
SO HOW DO I GENERATE PDF FILES FROM FRAMEMAKER 6 & EARLIER?
The ONLY method that is really reliable for producing PDF files with FrameMaker 6 and earlier requires the generation of PostScript via a properly set printer driver instance associated with the Acrobat Distiller PPD and distillation of the resultant PostScript by Acrobat Distiller.
Case 1: FrameMaker and the Full Acrobat 4.05 or Acrobat 5.0x Products
PDF file from a "chapter" -- print directly to the Acrobat Distiller printer instance (Windows) or the Create Adobe PDF desktop printer (MacOS) already installed by Acrobat. If you check the "Acrobat data" option, then make sure to UNcheck the "print to file" option that gets set at the same time. As a result, the driver will automatically send the generated PostScript to the Distiller for you and delete the intermediate PostScript when done.
PDF file from a "book" -- print directly to the Acrobat Distiller printer instance with the "print to file" option checked (Windows) or the Virtual Printer desktop printer (MacOS) associated with the Distiller PPD (see details below under Case 2/MacOS). You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
In both the above sub-cases, the default driver options generally will be OK, but check on paper size and communication protocol (Use pure binary, not ASCII, for optimal performance AND no CTRL-D characters under Windows. Make sure to set Level 3 only and Binary under MacOS. Font inclusion "All" for Acrobat 4.05 and "None" for Acrobat 5 under MacOS.). With Acrobat 4.05, make sure you preset the Distiller to use the joboptions you want. With Acrobat 5, you can set this on a job-by-job basis via the driver printer setup interface (or print dialog on MacOS).
Case 2: FrameMaker 6 and the Bundled Acrobat 4.05 Distiller
Windows -- Create a new printer driver instance using the latest version of the Adobe Universal PostScript Driver Installer, downloadable from Adobe's web site AND the Acrobat Distiller PPD file (located in the XTRAS subdirectory of the Distiller directory). This driver instance should be set to print to the local port named "FILE:". Name this driver instance as "Acrobat Distiller". The default driver options generally will be OK, but check on paper size and communication protocol (use pure binary, not ASCII, for optimal performance AND no CTRL-D characters). Make sure you preset the Distiller to use the joboptions you want. Print directly to this Acrobat Distiller printer instance. Make sure that the "print to file" option is checked. You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
MacOS -- Install the latest version of AdobePS 8.7.x, downloadable from Adobe's web site. In FrameMaker, go to Page Setup and select the "Virtual Printer" and go to the "Virtual Printer" window pane. Select the Acrobat Distiller PPD file (located in the XTRAS subfolder of the Distiller folder). Print directly to the "Virtual Printer" (Make sure to set Level 3 only, Binary, and font inclusion "All".). Make sure you preset the Distiller to use the joboptions you want. You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
Case 3: Acrobat 3
Acrobat 3 is not officially supported for the latest OS versions and I personally would no longer recommend its use for generation of PDF files given that Acrobat 5.0.5 is the current version of Acrobat.
- DovYou're asking a lot of ancient Acrobat to work with an Office that never existed when it was made. "Just updated my office suite" is a massive change, and Window 8 didn't exist at that time either...
-
I'm using MacFuse to connect via Finder. It worked before, even on 10.7. But since I cannected th eiPhone to my Windows 7 dual boot partition, now it won't work! Maybe it was just a coincidence, not sure. Just returns this error:
"The operation can’t be completed because an unexpected error occurred (error code -8003)."
I get this one when I try to copy files OFF of the iPhone:
"The operation can’t be completed because an unexpected error occurred (error code -8072)."
Sounds like a permissions error to me. So I fixed permissions on my Mac with disc utility, but same problem. Then chmod with terminal the media folder. Did nothing. So I can't change permissions, and they're not broken. What could've happened? I'm like, locked out of my device!Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button
Maybe you are looking for
-
Hi All, When I am dispatching an activity through CM22, I am getting error "Error during scheduling of splits-An error ocurred during scheduling of splits.The cause of the error may be a person is not available during the split period" Does this is d
-
Overlapping/wrong-sized thumbnails in filmstrip
I do have a problem with the thumbnails in the filmstrip. My catalog contains 56K pictures. Having all pictures shown in the filmstrip, the thumbnails start overlapping each other, starting roundabout at position 30000. The problem is getting worse t
-
I have no "Performance mode" in my bios
MB 865G Neo2-LS v1.0 BIOS from 1.3 to 2.1 And i have no this option in bios setup. Where is problem?
-
I downloaded the 8.02 last night and its now swapping through a blank blue screen and the apple screen on my iphone 5S, how do I fix this?
-
Why OBIEE always joins all dimensions to the fact?
We have a fact table, which joins 10 dimensions. I have a report that gets data from the fact and only one dimension. However, when i see the physical sql, i see that OBIEE joins all dimensions to the fact, even if I am not selecting any information