TS3212 how come every time i try to update itunes I get an error when its almost done downloading

10.6.0.40 I cant update itunes on my computer and I cant sync my new 5

What does the error message say? (Precise text, please.)

Similar Messages

  • Every time I try to run iTunes I get an error message sayinh: An application has made an attempt to load the C runtime incorrectly. What does this mean

    Every time I try to run iTunes I get an error message sayinh: An application has made an attempt to load the C runtime incorrectly. What does this mean

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • TS5376 Every time I try to install Itunes I get an error message saying it is unable to start services and to verify that I have sufficient privileges.  I am the administrator.  I have tried everything I can think of.

    Every time I try to install Itunes I get an error message saying it is unable to start services and to verify that I have sufficient privileges.  I am the administrator.  I have tried everything I can think of.  When I click the ingore option it doesn't install corectly and I get a message saying MSVCR80.dll file is missing.

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Every time i try to update itunes i get error code 2330, What is it ?

    niose it

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • HT2311 Every time I try to update iTunes, I get a message saying the request timed out.

    I cannot upgrade iTunes. The internet is fine - nothing else times out.

    Hey tonyincary
    If you having an issue with upgrade process for iTunes, try downloading directly from the following page to resolve the issue.
    iTunes Download
    http://www.apple.com/itunes/download/
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • How come every time i try to download a app  it says Your apple id has been disabled. I already reset my pass word and it keeps saying the same message?

    How come every time i try to download a app  it says Your apple id has been disabled. I already reset my pass word and it keeps saying the same message?

    Apple - Support - iTunes - Contact Us

  • Every time I try to open itunes I get a message saying "runtime error. An application has made an attempt to load the C runtime library incorrectly. I have already un- and re-installed it, but i get the same message as before. How do i fix this?

    every time I try to open itunes I get a message saying "runtime error. An application has made an attempt to load the C runtime library incorrectly. I have already un- and re-installed it, but i get the same message as before. How do i fix this? I don't want to lose my music and would at least want to save that.

    Follow the instructions of tt2 given in https://discussions.apple.com/thread/5822086 and note to run as admin

  • Every time i try and open safari i get an error message.. how do i reinstall safari so that i can open and use it?

    every time i try and open safari i get an error message.. how do i reinstall safari so that i can open and use it?

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • I cannot BUY any iPhoto products. Every time I try to submit something, I get an error message - A coonection could not be established at this time - I have been trying to buy a photo book for 2 days now with no success. I am using iPhoto 09

    I cannot Buy any products from my iPhoto 09. Every time I try to submit something, I get an error message - A connection could not be established at this time. There is nothing wrong at all with our internet connection, and I have been through all the suggestions on the Apple help page, and spent 2 hours on the phone this morning getting passed round various call centres. They claimed they had not heard of this problem before. I successfully purchased a calendar in Dec with no problems at all - so I just don't understand!

    Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    then boot into safe mode and try again
    LN

  • Every time I try to install iTunes i get error message 2329.

    Every time I try to install iTunes i get error message 2329. This is really ticking me off and I would appreciate any help.

    Here is an article from the apple support website that might help out.
    http://support.apple.com/kb/HT1926?viewlocale=en_US

  • I am really angry that I get this message every time I try to update Itunes.  "The File 'C:/documents and settings\DEAN\Local Settings\Application Data\Apple\Apple Software Update\itunes.msi' is not a valid installation package for the product itunes.  Tr

    I am really angry that I get this message every time I try to update Itunes.
    “The File ‘C:/documents and settings\DEAN\Local Settings\Application Data\Apple\Apple Software Update\itunes.msi’ is not a valid installation package for the product itunes.  Try to find the installation package ‘itunes.msi’ in a folder from which you can install itunes.
    What kind of gobbledegook is that?  Are you or Microsoft crazy.  Us computer users need simpler instructions.  Or you need to write your programs so that they work.
    Signed,
    Frustrated Apple User
    Dean Weaver

    “The File ‘C:/documents and settings\DEAN\Local Settings\Application Data\Apple\Apple Software Update\itunes.msi’ is not a valid installation package for the product itunes.  Try to find the installation package ‘itunes.msi’ in a folder from which you can install itunes.
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Every time i try to open itunes i get the 'Itunes Setup Assistant'

    Every time i try to open itunes i get the 'Itunes Setup Assistant' even though i have already installed and configured itunes. And after exiting this i get onto itunes but all of my music is GONE. (even though i know i can always import it back) But this means that whenever i want to use itunes i have to configure it and import all of my tunes again which takes ageees. The, as soon as i go to open it again i have to repeat the whole process!!! By the way, i have already tried re-installing itunes and every other apple device completely on my computer, but nothing is working!!! ANY HELP WILL BE MASSIVELY APPRECIATED!!! Ps. this only just started happening a week or so ago.

    This just started happening to me last week also. After I went through the setup process I could get into my itunes but would get a msg about library not being saved due to user not being an administrator. I went into my program files opened the itunes folder right clicked on the itunes music folder and clicked on "Run as administrator". I haven't had a problem
    since. Don't know if this will work for you but I guess it won't hurt. good luck.

  • HT201210 my iphone 1st gen is stuck in recovery mode and every time i try to reinstall firmware i get an error code 1015 can anyone help please?

    my iphone 1st gen is stuck in recovery mode and every time i try to reinstall firmware i get an error code 1015 can anyone help please?

    Make sure you are using current iTunes on your computer. Click the iTunes Tab at the top of this page. Or try to Restore your iPhone with a different computer.

  • Photshop Elements 8 for Mac doesnt start after I update to OSx 10.7.5 every time I try to lunch it I get an error message 150;30

    Photshop Elements 8 for Mac doesnt start after I update to OSx 10.7.5 every time I try to lunch it I get an error message 150:30

    Yes, Actually was done from an Apple Genius at the apple store, the hard Disk was formatted and then re installed everything from back up.

  • HT201210 stuck in recovery mode and every time i try to recover it i get the error code 3194

    I tried to update my iPhone 3gs, and it failed to update, and now it's stuck in recovery mode and every time i try to recover it i get the error code 3194
    Does someone know what i should do?

    Make sure you are using current iTunes on your computer. Click the iTunes Tab at the top of this page. Or try to Restore your iPhone with a different computer.

Maybe you are looking for