TS3212 I'm trying to update my version of itunes. I get a message that MSVCR80.DLL IS MISSING AND I NEED TO REINSTALL. wHEN I REINSTALL I GET A MESSAGE THAT APPLE MOBILE DEVICE FAILED TO START AND IT WON'T LET ME OPEN ITUNES. WHAT DO I DO?
i'M TRYING TO UPDATE MY VERSION OF ITUNES. i GET A MESSAGE THAT MSVCR80.DLL IS MISSING AND THAT I NEED TO REINSTALL. wHEN I DO THAT, I GET A MESAGE THAT APPLE MOBILE DEVICE FAILED TO START AND IT WON'T LET ME OPEN ITUNES. WHAT DO I DO?
Check out the user tip below.
https://discussions.apple.com/docs/DOC-6562
Similar Messages
-
I tried to install the new version of iTunes days ago. It seems like it's going to install and then it comes up with a dialog box that says "Apple Mobile Device" failed to start and to verify I have sufficient priveleges. I don't know what I need to do to get it to install.
It seems like it's going to install and then it comes up with a dialog box that says "Apple Mobile Device" failed to start and to verify I have sufficient priveleges.
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services. I do not know what to do. I am the only user on my HP Pavillion laptop. Help!
Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
Encountered an error apsdaemon.exe when trying to update itunes. Tried to redownload it and it said Service 'apple mobile device' failed to start and do I have sufficient privileges to start system services? I have an Ipad too. R they talking about it? I didn't uninstall Itunes from the Ipad Just my PC,
I don't think so...Seems like an apple issue to me...Or do you know something I don't?
-
That worked, however I now get two error messages when I install I Tunes:
o Apple Mobile Device failed to start.
o Apple Application Support not found.
This were of course deleted in the recommended re-install procedure to resolve the dll file, but repeated uninstalls and installs simply bring up these two error messages with a recommendation to install I Tune again. Installing the new I Tunes version seems to be problematic per the discussion groups and has no simple solution. SHould not the Genius bar be able to resolve this at an Apple Store? Want to buy a new I Phone 5S, but this problem effectively stymies this.See Troubleshooting issues with iTunes for Windows updates.
tt2 -
TS1717 Apple mobile device failed to start
During installation of iTunes, error message: Apple mobile device failed to start and something about not having "privileges"
Some ideas?I finally re-tried the process in this link: http://randomwindowstips.wordpress.com/2009/12/08/windows-7-itunes-9-software-is -not-installed/ and it worked. I had to do a few extra things though. I read every comment and noticed after I used this process I had the same problem as some others. My device was showing with an exclamation point in the device manager and said that the driver was unsigned or something. I then did a repair on all the itunes .msi files and tried to install the mobile device support. This time it worked. After trying everything else for over a month I couldn't believe I finally got it to work!
Not sure if everyone will have to do the extra steps that I did, but hopefully this helps someone. -
When I tried to update my itunes I got a message srvice apple mobile device failed to start and retrying elicits the same message. What do I do?
The most complete resolution is found in the user tip: https://discussions.apple.com/docs/DOC-6562
-
when trying to update itunes error 7 appeared and a message to reinstall. have tried to dowload again but now 'apple mobile device' failed to start, verify you have sufficient privileges? Anyone know what this means. do I ignore?
I am having this same problem. I took Kappy advice on restarting the Apple Mobile Device Service, however that did not work. I got this message in a pop up window that came up immediately.
Windows could not start the Apple Mobil Device Service on local computer.
Error 1053 The service did not respond to the start or control request in a timely fashion.
I have already uninstalled itunes, all the related programs and I cannot reinstall, this Apple Mobil Device message stops the install.
Can anyone please help? -
When attempting to update to latest version of iTunes on my PC (11.1.4) I received an error message: Microsoft Visual C++ Runtime error as well as: AppleSync Notifier.exe - entry point not found, the procedure entry point sqlite_wal_checkpoint cound not be located in the dynamic link library SQLite3.dll.
I unistalled iTunes, then attempted to reinstall. I get to a point where I receive the following response: Service (Apple Mobile Device) failed to start.Verify that you have sufficient privileges to start system services." I'm stuck at this point and unable to proceed with install. Help please!Hi yuiopyy,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden -
i downloaded newest itunes version and it would not install properly and now i can't open itunes. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. what can i do to fix this problem besides restoring system to an earlier date
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I have uninstalled and reinstalled iTunes Version 11.4.1 and still cannot access. I continue to get the Error 7 Windows Error 193 and now I am getting the Apple Mobile Device failed to start. I can't access any of my music I HAVE PURCHASED. What to do?
I am getting the same error message - error 7, Windows error 193 running iTunes on a PC Laptop (HP) which has been running iTunes previously for at least 2 years.
I followed the Apple support page and uninstalled (in order) all Apple programmes specified, rebooted, then re-installed. Two additional errors crop up in re-installation, the first one is to do with Apple Mobile Support Device Services. It seems that this might be rectified by plugging in said devices before finishing the re-install. The second reads iTunesHelper was not installed correctly please re-install iTunes. This persists. I cannot uninstall iTunesHelper using the Control Panel, but I can delete it using Windows. However, after re-installing again, it still won't run and the original error comes back. I've downloaded and uninstalled 15 times now and this is taking far too long to be acceptable. -
Last time I opened ITunes, was told I did not have latest version and proceeded to download new version. As it was loaded, keep getting message that Apple Mobile Devices failed to start, verify that I have sufficient privileges to start system services. I am the only user on the computer and in household. I have tried installing several timees and keep getting same message.
What should I do?Hey CarleneS,
First, I would try the steps in here:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
If you end up having to remove and reinstall iTunes, make sure you follow all of the steps in this link:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
This section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Regards,
Delgadoh -
I have an HP Pavilion zv6000 laptop with which I have used iTunes for years. I downloaded iTunes version 11.1.4.62 and rcvd error msgs (Apple Mobile Device failed to start. Verify sufficient privileges to start system svc. Then a MSVCR80.dll not found.???
Hello Don,
Thank you for the details of the issue you are experiencing with iTunes. I suggest removing iTunes and all related components and reinstalling iTunes for the issue you described. The following article has steps to do this(it is important to remove all components in the order listed):
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
I recommend continuing with these articles if you continue to experience issues with iTunes:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Not sure what to do. I've tried a system restore on my computer after the update in hopes of undoing the problem, that didn't work. I've tried to install, the new version of itunes for over two days now and I get to the point where it says "starting services" and it almost get's done and then it gives me that message " Service apple mobile device (apple mobile device) failed to start. Verify that you have sufficient privledges to start system services." Then it gives me three options to click on "abort", "retry" or "ignore". I've tried to retry over and over and it does no good, I just get the same message. I've tried ignore and the one time it did finish installing itunes, it didn't work, I got error messages telling me that it failed to download properly and I needed to delete the program and download it again. I thought maybe it had something to do with my ipod not being pluged into the computer so I pluged that it and it's still giving me the same message. I just don't know what to do. I'm very frustrated and I would really appreciate it if someone could help me. I'm completely out of ideas.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Hi!
So i think i closed the wrong service at some point a few weeks back (apple mobile device) but iTunes remained working after that for another week. I then updated iTunes and i get the same "Service ‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." every time. If i click ignore, just so i can access iTunes with out syncing my iPod (touch 2nd gen) i then get 'iTunes was not installed correctly. Please re-install iTunes. Error 7 (Windows error 193)" when it has all installed. I don't understand what the problem is anymore as I have looked at other questions on the apple website, carried out the advice and it hasn't work. Any of them.
Tings I have done:
- Wiped all iTunes and Apple data from my computer (if you search for 'iTunes' or 'Apple' nothing comes up apart from applets from system code.
- Attached iPod before iTunes install and updated drivers.
- Installed iTunes as 'Run as administrator'
- Uninstalled and re-installed the software nearly 20 times now and rebooted the computer in between everytime.
Please someone help because i really need to get music on my ipod and i enjoy the ease of use of iTunes compared to spotify or Windows Media Player.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
Regarding AMDS failures there is a hint in another thread that disabling the Windows Firewall before attempting to reinstall may help, otherwise take a look at the steps outlined in this post. Re: Can't install iTunes 12.1 on Windows 7 64-bit. I know they look a little daunting, but the process of generating the logs themselves isn't that hard to do. Extracting useful information from them is still a challenge but maybe something will leap out. If you want to post the log for the failed components for me to have a look at here or in the other thread please edit out any personal information, particularly your email address, first.
tt2
Maybe you are looking for
-
Glitches/dropout on burned DVD. HELP!!
Hello all, Great forum. Really hope someone can help. My problem is that I have burned using DVDSP3 onto verbatim DVD-R using a superdrive. On the finished product there are several glitches that look like dropout of some sort ie. blockey distortion.
-
I have a customer who's mac mail keeps hanging up their dial up connection after a send/receive. For the life of me I can't find any setting that would do this, of course my Mac is at home and we're going by screenshots here at work, any thoughts? th
-
How do I sync Firefox with Gigaset Quick sync using MS Outlook
MS Outlook adressbook is the only option to use the tel.directory in Gigaset S 790 dect telephone Do you have a way to get around it regards Bengt
-
Adobe Premiere Elements 4 - Rendering Problem
If I create small slide shows in Photoshop Elements 6 (ranging from 59 - 125 JPEG Still Shots with captions and/or added text)I can then send each slide show separately into Premiere Elements 4, make further adjustments and add title pages, I can the
-
Getting the value of a Local Variable.
How do I make a local variable available to a method in the same class so that this local variable can be available to any class? public class CheckDetailRowsIterate extends TagSupport public int doStartTag() throws JspException Row curr