TS3212 my itunes just stopped working! help

I tried to sync my iphone and it wouldnt bring up itunes..tried to manually open itunes and get this error
The procedure entry point kFigMetadataFormat_QuicktimeMetadata could not be located in the dynamic link library Media Toolbox.dll.
then get itunes was not installed correctly.please reinstalll itunes...error 7 (windows error 127).
so i unistalled itunes from my programs and reinstalled which it stated it was a successful intsall but when i try to open it up i get the same exact error???

Try this:
1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep/Wake and Home button down until you see the Apple Logo.

Similar Messages

  • Itunes "has stopped working" Help pls

    About a month ago Itunes for some reason, as soon as i open it, just freezes and i get a itunes has stopped working error.
    I've tried about everything that i have read in forums and in the apple support and nothing has helped me.
    I'm using windows 7.

    Hello, jerrywise. 
    Thank you for visiting Apple Support Communities.
    Experiencing issues such as this when connecting to the iTunes Store can be due to multiple causes and not always a simple fix.  I would recommend going through each of the steps in the attached articles below.  Be sure to test the results after processing each step.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/ts4123
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    Cheers,
    Jason H.

  • I keep getting "itunes has stopped working" help please ,daughter is frantic to use xmas present

    Need a bit of help ,computer keeps saying "itunes has stopped working " and then "a problem has caused prog to stop working etc" when i follow links nothing happens and the same info comes up.Please help.

    This Apple article will help you isolate the problem a little -> iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    Does iTunes start in Safe Mode?
    Open iTunes in Safe Mode to isolate any interfence with plug-ins or scrpits not manufactured by Apple.
    Hold down the Shift and Control keys while opening iTunes. If performed correctly, you should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
    After clicking Continue, determine whether the issue you were experiencing persists in Safe Mode.
    It would also be helpful if you can provide the Error Report from the Windows Action Center Reliabilty History. To view this go to Control Panel > All Control Panel Items > Action Center > View Reliability History under Maintenance. Double click the iTunes critical event and copy it into your reply.
    If you run into problems, see b noirs walkthrough in this thread -> Windows Apple Mobile Device

  • Airport Extreme 7.6.1 WiFi just stopped working, HELP!

    Hi all,
    not sure what is going on, but my Airport Extreme running 7.6.1 just stopped working over wifi. My desktop PC is wired to the Airport and it is running fine on the internet. My iOS devices, however (iPhone 4 and iPad 1) just won't work over wifi. My wife's blackberry is also not working over wifi.
    I am running AirPort utility on the iPad and it can find and manage the AirPort base, but it says internet is not working (orange dot) which is not true, as I am typing this post on the PC wired to the AirPort.
    I have tried to reload the AP to no avail. Have also tried to reload the iOS devices, to no avail.
    What should I do? Seems like the bridge connection between the wifi network and the Ethernet port just died.
    On a side note, 7.6.1 seems to be very unstable, my PS3 connection drops constantly, which never happened before. Can you point me to a more stable release?
    Persio

    Try restoring the factory settings of the AirPort Express and delete all profiles
    you have set:
    1 Unplug the AirPort Express.
    2 With the tip of a straightened paper clip to hold the reset button while
    plug the AirPort Express.
    Wait until the status light stops blinking and then restart the base station.

  • Airport Extreme Card just stopped working -help!!

    I've had my MacBook Pro since mid August with a built Airport Extreme Card. It has for most of the time been working fine with my Netgear router. Yesterday it just stopped working. The black bars aren't showing on the aiport, it keeps refusing to accept the WEP password.
    I have tried switching the airport on and off, and have also switched off the router and re started it, all to no avail. The WEP password is correct.
    I have a WIFI printer connection and the airport will not connect to that either.
    This has happened once before about 6 weeks ago but I can't remember what I did, if anything, to remedy the situation.
    I have 3 other laptops all working perfectly well on the system, and all printing from the printer without any problems.
    Any suggestions before I and the laptop go hurtling through the first floor window?

    Hello MiBy. Welcome to the Apple Discussions!
    I've had my MacBook Pro since mid August with a built Airport Extreme Card. It has for most of the time been working fine with my Netgear router. Yesterday it just stopped working. The black bars aren't showing on the aiport, it keeps refusing to accept the WEP password.
    Try resetting your MBP's PRAM ...
    Reset the PRAM
    o Shut down the computer.
    o Turn on the computer.
    o Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    o Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    o Release the keys.
    (ref: Resetting your Mac's PRAM and NVRAM)

  • ITunes just stopped working.  HELP.

    I have the latest version and have had no problems until today. When I opened iTunes it looked like it was installing something, then give me unknown error 200 and says it can't open.
    HELP.
    The only things I can think that might have messed with iTunes is the fact that I recently installed GearPlayer (a transcription program) and an audio conversion program. Perhaps one of those did something with my audio settings. Any hints on how to find out? I'm home after surgery and need my iTunes
    Dell   Windows XP  

    DFU it is, then.
    Plug the phone into a computer that is running the lates version of iTunes.  The computer also needs uninterrupted access to the internet.  Read through the instructions before starting the DFU.  The process takes about ten minutes.
    1.  Once iTunes is up and running press and hold both the sleep/wake and home buttons - count to eight.
    2.  Let go of only the sleep/wake button - count to five.
    3.  Look at the computer.  In a few seconds, you should see a popup.  If nothing, look back at the iPhone.
    If you see the Apple Logo, the DFU failed and it's doing a hard reset.  From this point, you can let it finish the Hard Reset or you can re-attempt the DFU.
    4.  Follow the instructions on the iTunes popups.  The warnings are telling you that all you information will be lost.  If you consent to that data loss, then continue. 

  • My ipod touch just stopped working, help please :(

    hi, I need some help with my ipod touch. i was using it and it was working just fine and i locked the screen and walked away came back to use it and the screen wouldn't unlock and it wouldn't even turn on. i plugged it in just to see if it needed to be charged and the screen wouldnt even light up or say that it was charging. is there anything I can do to get it to work again? or am i looking at having to buy a new one? if anyone has suggestions i would really appreciate it.
    thanks so much,
    Lauren

    Try here:
    iPod touch: Hardware troubleshooting

  • My command z key just stopped working -HELP

    Please help. I was working in InDesign CC and hit the Command z key. Everything froze. I had to restart and now command z doesn't work.

    Just noticed my iMAC finder preferences are not working as well.
    Does it sound like a MAC or Adobe issue?
    I am not an IT person, just a simple designer. It takes me forever to get my preferences set. I have just started using my iMAC and Adobe CC since purchasing Dec. 2013. Looks like I should have stayed with good ole CS3.

  • My iTunes just stopped working!!! Anyone else in the same boat?

    I am running windows XP home with Service Pack 3.
    I click on the iTunes desktop icon as I always have and I see the hourglass but no response.
    I have tried to troubleshoot with Apple iTunes support and nothing.
    I have followed instructions from online support and nothing.
    Uninstalled and reinstalled as per Apple troubleshooting instructions and nothing.
    Even the Apple tech seemed stunned saying something is wrong with the computer.
    My computer is fine...I have not added or changed anything to it aside from the iTunes updates.
    Is Apple going to fix this or tell us what is going on?
    Has anyone else figured it out?
    Thanks in advance for any replies!

    It's not the iphones, it's more likely one or more of your programs causing this issue. It's not the iPhone 6's. The possibility of you getting 2 bad iphones from different batches is extremely remote or you have the worst luck on the planet. lol    If one iPhone has it, then you get a new one and the same problem comes up again, it's most likely due to an issue with a program that you keep getting back from restoring an old backup. Restore the iphone again and set up as a new iphone. Then manually import your music and your photos. Once that's done, try to use your iphone to see if everything is ok. If it works good for a few days, then try to add some of the apps. At some point, you'll end up loading the malicious app and the problem may come back. Make sure that the apps are all updated. If you still have problems, call Apple so that they can run a diagnostic report and find out which app is causing this issue. Then you can simply delete it and/or update the app. More solutions are available but that's all I will post for now.

  • I use to be able to autofocus my camera and it just stopped working help please

    MMy phone won't autofocus anymore it says something like ac/af lock help please

    I suspect an Apple server problem. Many users have been reporting problems with Messages and Facetime today.

  • My keyboard just stopped working help mèeeeee

    My key board wont work all buttons are dead

    One or more keys on the keyboard do not respond
    Unable to type while Mouse Keys is enabled
    If keys on your keyboard don’t work
    Dictation shortcut key may not work when Sticky Keys or Slow Keys are enabled
    Key commands for Zoom and Invert Colors do not seem to work
    If the numeric keypad doesn’t work
    Use keyboard function keys
    If you can’t use some keyboard shortcuts

  • 5 ghz just stopped working - help

    I've been running my original 1 TB Time Capsule connected to my cable modem in n only 5ghz for months.
    I have Airport Extreme connected in another room connected to a couple of HP printers so we can print wirelessly.
    And lastly an original Airport Express connected to the Time Capsule via ethernet cable to have g available for our iPhones.
    All has been working flawlessly for months.
    Today I closed my MacBook Pro and went out. Hours later I came back and opened my computer and it didn't seen the Time Capsule n. It wasn't even showing up in my Airport Menu. I could see the Airport Express g fine. And could connect and surf the web fine. But the Time Capsule was nonexistent as far as my computer was concerned.
    So I restarted everything. Nothing. So I did a soft reset of the TC. Nothing. So I did a hard reset and reconfigured. Nothing.
    So out of the only left to do was to set the TC in n only mode at 2.4 ghz. And my MacBook Pro sees the TC fine in 2.4 ghz. But in 5 ghz the TC is invisible. Even though this has been working fine and fast for many months.
    Any ideas? Why 5 ghz only would not work? Why 2.4 n only works?
    I'm at a loss. Could the 5ghz band "break"? But 2.4 ghz be fine?
    Thanks.

    My original time capsules 5GHz radio died about a month ago. It was out of warranty, so I'm using my airport express for the 5GHz band.
    I don't think the radios in the TC are very good.

  • Itunes has stopped working  i have instaled 10.3 ,10.4

    itunes has stopped working  some one please help  i have 10.5.1 version of itunes every time i connect my itouch  an error message pops up itunes has stopped working help HELP HELP.

    If and when I finally manage to open it, as soon as I click on a movie to watch, the message "itunes has stopped working" comes up.
    Try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • I just received a refurbished replacement iphone and now while syncing I get "itunes has stopped working"...help???

    I just received a refurbished iphone the the insurance provided by a major electronics retailer.  Since i have tried to sync it to iTunes I have received "iTunes has stopped working" error.  It says it will come back with possible solutions, but never does a thing.  I have already removed and again installed iTunes, QuickTime, etc. to no success.  Not sure what my next step should be.

    This helped overcome the crash problem, but (as reported before), I still have to start iTunes in Safe Mode in order to watch any videos. This has been the case since 10.5.
    The regular mode behavior has changed a bit - instead of the progress bar moving to the end of the video, showing no video but playing the audio for about three seconds, it now leaves the progress bar where it is ... but the rest of the behavior hasn't changed.
    Windows 7 Professional, 64 bit on an HP dv8t quad-core laptop w/ 8 GB RAM, running nVidia GeForce 230M with 1 GB video RAM.
    Thanks for your prompt response to the original problem posted above. At least now I'm back where I started from before I upgraded to 10.7. Not optimal, but I've finally gotten used to doing a Ctrl-Shift-click to run iTunes.
    Scott

  • Hello, my iphone 4 has just stopped working it has gone blank..i plugged it into my laptop and it the apple sign keeps flashing it wont connect to itunes either :/ HELP!!!

    hello, my iphone 4 has just stopped working it has gone blank..i plugged it into my laptop and it the apple sign keeps flashing it wont connect to itunes either :/ HELP!!!

    Try the following:
    1. Reset
    Hold the Sleep and Home button down until you see the Apple logo
    2. Restore:
    http://support.apple.com/kb/HT1414
    3. Recovery:
    http://support.apple.com/kb/HT1808

Maybe you are looking for

  • Formula variable with replacement path

    HI , 1. Is it possible to use "Customer exist- without user entry variable in the formula variable with the replacement ? 2. if I use two variable for a same time char in one report (one is User entry variable and the other is customer exit variable

  • Mime attachments from email not opening in PDF only on iPhone 5 ok not on iPad Air

    anyone know why  when sending email from outlook the iPhone 5 s seems to open attachment as mime and the PDF but the iPad Air doesn't open with PDF

  • Streaming audio to airport express

    With iTunes there is an option to send your audio to the Airport Express router. Is there a way or app to send audio (master output) from Logic to the Airport Epress? This would be very usefull to listen to my mixes on my home stereo without using lo

  • Creating Base Station with Extreme Card.

    I have a 3 year old Mac Pro running Snow Leopard and just had an Extreme card installed. I want to connect to my iPod touch and Apple TV. I assume that I need to create a network and establish my Mac Pro as a base station. Other forums discuss using

  • Version number on splash screen

    So I've just reinstalled CS3 after "upgrading" to Vista 64, run all the updates... but yet the splash screen and "About..." screen both say I'm running version 3.0.0. Am I remembering incorrectly, or is the version with all the updates something more