TS3212 my upgrade fails to load shortly before fully downloading

I try to upgrade my itunes to work with my new iphone, but the downlaod faisl to complete shortly before finsihing. Tried to reinstall itunes but it informs me that I already have anew version. What do I do?

Tried to reinstall itunes but it informs me that I already have anew version.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Similar Messages

Logic8 w/ BFD2 upgrade "Fails to load Audio Unit"

I had BFD 1.5 and now I installed BFD2. I got the latest update. Now my old songs (Logic 7 songs) do not recognize the BFD1 audio unit. The message is: "Failed to load Audio Unit, please contact the manufacturer for an updated version or further assitance. (-10110).
The drums aren't loaded or anything. This means I would lose my old song settings for BFD, too tedious to fix.
Runnning OSX 10.5.2 with Logic 8 on a G5 with 3GB.

Actually not- just remembering that I had this problem immediately on 2 different computers with exactly the same up to date software: my MBP and Powermac. These must actually be legitimate disagreements in the software that Apple will have to address and the best thing to do is to leave feedback.
My reasoning is this: I was running Sampletank(ST) v. 2.2.2 without problems when I installed samplemoog, then samplemoog wouldn't load but ST can load it's instruments the same and everything was fine. Then I installed ST 2.5 and it wouldn't load. So it seems that manufacturers are getting ahead of the old A team- but to forgive is divine and thus forget the upgrade for the old version.
There are plenty of Sampletank XL users out there so perhaps you could report running v. 2.5 without problems? Obviously something trips Logic up and it may well be the upgrade. It's possible someone who just installed the newer version wouldn't have the problem but that's beyond me.

New upgrade fails to load web sites on Mac 10.5.8. Old version is just fine. Please fix it. Thanks.

No answer to this question on 9/5. Older Firefox version works great. New one fails to load websites and is slow when it does. Often requires loading browser twice. Site load only partially. Have Mac lap top 10.5.8. Is Firefox working on this problem?

No answer to this question on 9/5. Older Firefox version works great. New one fails to load websites and is slow when it does. Often requires loading browser twice. Site load only partially. Have Mac lap top 10.5.8. Is Firefox working on this problem?

I have deleted my itunes b/c I the update to 10.5.2 stopped before fully downloading, now I can NOT reinstall itunes

I have removed everything in order like the site tells me to. I have restarted the computer and downloaded the newest version, but it will not open. I click on the itunessetup.exe to run but NOTHING happens!
Please help....I am SOOO frustrated!
Thanks in advance!

I can now get it to run but I can only get so far before I get this message....something about a corrupt cabinet file "i tunes.cab" .
Please help!

ITunes fails to load. Message is Service Apple Mobile Device failed to start. Verify you have sufficient privileges to start system services. Never had this problem before trying to install this upgrade

iTunes fails to load. Message is "Service Apple Mobile Device failed to start. Verify you have sufficient privileges to start system services." Never had this problem before trying to install this upgrade. How do I fix this?

Dave, same problem here. And I did go in as admin to Administrative Tools, Services, Apple Mobile Devices and tried restarting the service. It seems there is a bug with the newest update, period. All of the normal "easy" steps don't work. Before I remove all of Apple's programs, including Bonjour....I'm running a full system scan.
But the answer will be to remove all of the Apple stuff, then reboot, then use whatever utility you have to remove all temp files...then go download and install it again. This has worked for several people (I read the thread before posting). Win 7 64bit. It just seems that Apple did not thoroughly test this new version. Period.
If Apple reads this...I have many computers...and whenever Apple wants to update something...it just about stops everything else that is going on. Total memory hog, even with 16G RAM and dual quad core processors. It has to learn to play nice with others.
After the scan and I'm sure an hour or two of work...I'll re-post.
Of course if you do image back-ups, as I do, you can simply restore your drive to its previous state and run the previous version of iTunes, declining the update, until Apple gets it right. Depending on the size of your drive, this could take hours. It is a matter of choice, of course.

Failed to load backgroud images after upgrade to 4.1.1 in Mozilla Firefox

Hi,
I have recently upgraded our test APEX environment from 3.2.1 to 4.1.1.00.23. Everything went smoothly - I have only one small but annoying problem. In both administration and administration services some background graphics are not displayed. This issue occurs only under Mozilla Firefox (in MS IE it OK). The application frontend is OK in both browsers.
Under Firefox, I inspected the sourcecode in Firebug and the relative links to images. e.g.
background: url("../apex/builder/bg-region-darkblue-r.gif") no-repeat scroll
show message "Failed to load the given URL".
I suppose that the issue might be somehow related to the fact that our application is accessed via apache proxy. Because when I open the administration and/or administration services page in FF directly on the server, it displays correctly (incl. images).
But the network (Apache proxy) configuration is exactly the same as in the previous version of APEX where we had no problem. Something must have changed in the sourcecode of the new version...
Does anybody know how to tackle such an issue? I'd like to have it solved before upgrading the production environment.
Thank you.
Zdenek

I forgot to mention that we use EPG instead of Apache HTTPD.
And, of course, I updated images following instructions in http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21673/otn_install.htm#BHAJIGDA
>
As you have mentioned earlier
Because when I open the administration and/or administration services page in FF directly on the server, it displays correctly (incl. images).Which means the images are uploaded correctly in EPG.
Maybe there is a virtual directory, or some other setup, on you Apache proxy that is still pointing to a folder has does not have the latest images.
As you have rightly concluded earlier this is most probably something to do with your proxy setup. Not Apex.
So, check you httpd file.
Cheers,

FF29 fails to load Session Manager, old tabs, any add-ons, Cool Preview, etc after upgrade on XP

FF29 fails to load Session Manager, old tabs, any add-ons, Cool Preview, etc after forced upgrade on an XP system. Connecting to sites, especially support.mozilla.org requires numerous retries. Clicking Add0on shows none of the previous working ones. They are gone. No Session Manager at all. Even reporting this has taken over 3 hours. Yesterday, everything worked fine before the restart to 29. What can be done to recover settings from 2-3 days ago? Thanks for keeping it simple!

Thank you for your question. Once history is gone, there is not a big chance of getting it back. However there are some places to check. For next time, try to backup your profile [http://kb.mozillazine.org/Profile_backup].
The crash reports from your troubleshooting information is caused by a hang in the Flash plug in version 13. I understand however that this is an issue with the history.
*[[Recovering important data from an old profile]]
*[[https://addons.mozilla.org/en-US/firefox/addon/cacheviewer/ Cache Viewer]] is an add on to help you search through the dates of the history
*SQLite add on will allow you to open places.sqlite file in the current profile.

Calendar entries failed to load on upgrade: Mavericks to Yosemite

ALL Calendar entries (in default Apple calendar app) failed to load on OS upgrade: OS X Mavericks to Yosemite 10.10.1
     [MacBook Pro, 17 inch, Mid 2010, 2.66 Ghz Intel Core i7, 8 GB Ram 1067 MHz DDR3; 500 GB SATA storage / 145 GB free]
Thanks, in advance, for any help to restore old entries to the calendar.

THANKS!
In "System Preferences / iCloud" the Calendar box had been un-checked previously.
The link that you provided, to "Calendar - Restore Calendar Events" did provide instructions that WORKED!
However, I may have "messed up" the process:   AFTER restoring the appropriate files, I opened Calendar... no change; I opened iCloud in System Preferences and CHECKED the Calendars box... no change.    I decided to REBOOT the system; then opened Calendar. Voila!   All my calendars and events are present. That said, note that I still had the iCloud Calendars box checked before and after the reboot, and when opening Calendar.
I'm not sure, yet, if the present checkbox settings are my desired settings...   however, my desire was to get my calendars back, and I've got 'em!
THANKS AGAIN!

Failed to load preferences error on upgrade of Anyconnect to 3.0.3054 on my MAC OSX LION 10.7.1

Hi Folks,
Since the upgrade of Anyconnect to 3.0.3054 on my MAC OSX LION 10.7.1, i have been getting
failed to load preferences error. During the upgrade the vpn connection get established, but once
i disconnect and try to connect again its starts bombing on "failed to load preferences". For now
i keep uninstalling anyconnect and reinstall an older version which while autoupgrading to 3.0.3054
is able to connect for the first time. Its getting very painful. Any help from the support team will be
appreciated!

I had the same issue and it is due to corrupted preferences.xml file under /opt/cisco/vpn/profile directory. Easy way to fix is uninstall the client and remove the profile directory under /opt/cisco/vpn. Removing the profile directory requires a root access on MAC OS X.

Im failing to load the bootmgr before windows 7 installation.

Like the title says, I'm failing to load the bootmgr before the windows 7 installation. I get through the process of boot camping and then when it restarts it goes to a black screen and says something like bla bla bla failed to load boot mgr. I've been trying to get this to work for weeeeeeeks its ridiculous, this whole entire process is ridiculously stupid and shouldnt be this hard. Also people keep talking about reformatting something into NTFS or something and I dont know what any of that means -.- sooo yeah im sorry im stupid, but I would appreciate the help. Thank you in advance <3

Do you have a retail Windows DVD inserted into the optical drive?
If you don't know anything about Windows, what NTFS is or how to format a bootable Windows drive, then you should take the computer to an Apple retailer and arrange for a genius to help you out. Virtually, the entire process is outlined in the documentation you printed out, so I question how well you've read it.
You might check out iMac bootmgr is missing.
Boot Camp- Frequently asked questions about installing Windows 7
Apple Support - Boot Camp
Boot Camp - Installation & Setup Guide (OS X Lion)
Boot Camp- Start up to black screen after installing Windows

TS1717 Gentlemen, Your upgrade for ITunes version ll.1.4 has failed to load. And reloading does nothing but raise my blood pressure. I am not alone with this experience as I go on line I see the ITune world getting the MSVCR80.dll missing message . Wa

Gentlemen, I have wasted a day and probably lost my entire Itunes music collection by allowing an upgrade of Itunes version 11.1.4 Interesting because the other upgrades were routine. This failed to load and the message of missing MSVCR80.dll file and verify that you have sufficient privilege to start system service are of little comfort. Have re-installed numerous times to no avail. Wassup? I need help.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (If this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

SVN: Failed to load BDB error after upgrade...

During a recent system upgrade Subversion was upgraded from 1.6.3 to 1.6.4. After the upgrade I couldn't get to the repository through my web server. The log file has this error repeated: Failed to load module for FS type 'bdb'. Using svnadmin and svnlook gave the same errors.
I went back into /var/cache/pacman/pkg and reinstalled 1.6.3. After that everything was working fine.
Can anyone confirm? Should a bug report be opened?
Was this subversion 1.6.4 package compiled without BDB support? Was that intentional or an oversight?
Matthew
Brampton ON

tazboy78 wrote:
During a recent system upgrade Subversion was upgraded from 1.6.3 to 1.6.4. After the upgrade I couldn't get to the repository through my web server. The log file has this error repeated: Failed to load module for FS type 'bdb'. Using svnadmin and svnlook gave the same errors.
I went back into /var/cache/pacman/pkg and reinstalled 1.6.3. After that everything was working fine.
Can anyone confirm? Should a bug report be opened?
Was this subversion 1.6.4 package compiled without BDB support? Was that intentional or an oversight?
I remember seeing warnings about bdb being not enabled when I was compiling subversion for the ruby-1.9 update so I never uploaded my version and asked the maintainer to look at it. I guess the same warning was missed when updating to 1.6.4. File a bug report.

"Failed to load excel file" an Error Message while running TDS upgrade util

Dear All,
"Failed to load excel file" an Error Message while running TDS upgrade utility when clicking on CHECK DATA.
Please help me out on this!!!!!!!!!!!!
Thanks..........

Not all data can be exported to Excel easily. Especially if the query result is huge or there are special characters in the query results. You may try the most updated version.
Thanks,
Gordon

Failed to load META-INF/application.xml when upgrading to wls9.2

We are migrating our weblogic server from 8.1 to 9.2. Tried to use DDConverter to convert the EJB deployment descriptor, but when I ran weblogic.appc, I got the following error :
<Error> <J2EE> <BEA-160197> <Unable to load descriptor D:\workspace\webshopEJB\wl9.2/META-INF/application.xml of module webshopLogic. The error is weblogic.descriptor.DescriptorException: Unmarshaller failed
and
Caused by: com.bea.xml.XmlException: failed to load java type corresponding to e=application@http://java.sun.com/xml/ns/j2ee
Here is my application.xml
<?xml version="1.0" encoding="UTF-8"?>
<application xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="1.4">
<description>webshop EJB module</description>
<display-name>webshop Logic EJB</display-name>
<module>
<ejb>webshopLogic</ejb>
</module>
</application>
I checked for classpath, and still no clue about what's going wrong. Thanks in advance for any help.

I believe this likely is a classpath problem. I'd start by using the setWLSEnv.cmd or .sh script in the kit. That should set the classpath correctly.
Also, FWIW it wasn't required to run DDConverter. You could have used your 8.1 descriptors unchanged in 9.x as well.
-- Rob
WLS Blog http://dev2dev.bea.com/blog/rwoollen/

Windows Fails to Load After Upgrade to Mavericks

Related topic:
https://discussions.apple.com/activity?streamSource=connections
I'm a little late to this party, but hoping to find some help. I can see my WindowsXP Pro partition on the desktop, but after upgrading to Mavericks it won't fully start up. I'll get the usual screens, then the XP loading screen with the blue loading animation. After about 5 passes of the blue thing, it will hesitate and flash a blue screen so fast, that it took me several attempts to snap a photo so I could read it. "Unmountable_Boot_Volume" is the error. It then says to follow these steps... but cuts off and reboots.
One thing of note is that Parallels 10 uses the same XP virtual machine and boots just fine, so I figure XP can't be all that messed up. Maybe a driver issue, not sure. Does Mavericks not support XP? I'm open to Windows 7, but I'd like to backup some stuff first if possible. Maybe I can do that through Parallels?
Below are some details about my setup:
Als-Home-Mac:~ user$ diskutil list
THIS IS AN EXTRA FAT32 DRIVE
/dev/disk0
 #: TYPE NAME SIZE IDENTIFIER
 0: FDisk_partition_scheme *82.0 GB disk0
 1: DOS_FAT_32 NEWMAN 82.0 GB disk0s1
THIS IS THE MAVERICKS DRIVE WITH XP PRO PARTITION
/dev/disk1
 #: TYPE NAME SIZE IDENTIFIER
 0: GUID_partition_scheme *1.0 TB disk1
 1: EFI EFI 209.7 MB disk1s1
 2: Apple_HFS Big Al Pro 833.6 GB disk1s2
 3: Apple_Boot Recovery HD 650.0 MB disk1s3
 4: Microsoft Basic Data 165.7 GB disk1s4
Als-Home-Mac:~ user$ diskutil cs list
No CoreStorage logical volume groups found
Als-Home-Mac:~ user$ sudo gpt -vv -r show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=81964302336; sectorsize=512; blocks=160086528
gpt show: /dev/disk0: MBR at sector 0
 start size index contents
 0 1 MBR
 1 62
 63 160086465 1 MBR part 11
Als-Home-Mac:~ user$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 9964/255/63 [160086528 sectors]
Signature: 0xAA55
 Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: 0B 0 1 1 - 1023 254 63 [ 63 - 160086465] Win95 FAT-32
2: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused

Mac Pro 3,1
Quad-Core Intel Xeon
2.8 GHz
Upgraded from 10.6.8, but I tried unsuccessfully to upgrade to Lion first. That went all screwy but was able to go all the way to Mavericks instead. Proobably where things got messed up. I don't remember exactly how I fixed it. I didn't think I could go that current with this hardware.
Als-Home-Mac:~ user$ sudo dd if=/dev/rdisk1s4 count=1 2>/dev/null | hexdump -C
Password:
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 48 26 61 |........?....H&a|
00000020 00 00 00 00 80 00 80 00 ff 1f 4a 13 00 00 00 00 |..........J.....|
00000030 00 00 0c 00 00 00 00 00 ff a1 34 01 00 00 00 00 |..........4.....|
00000040 f6 00 00 00 01 00 00 00 cf 33 84 9c 53 84 9c d2 |.........3..S...|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb b8 c0 07 |.....3.....|....|
00000060 8e d8 e8 16 00 b8 00 0d 8e c0 33 db c6 06 0e 00 |..........3.....|
00000070 10 e8 53 00 68 00 0d 68 6a 02 cb 8a 16 24 00 b4 |..S.h..hj....$..|
00000080 08 cd 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 |...s......f...@f|
00000090 0f b6 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f |.....?.......Af.|
000000a0 b7 c9 66 f7 e1 66 a3 20 00 c3 b4 41 bb aa 55 8a |..f..f. ...A..U.|
000000b0 16 24 00 cd 13 72 0f 81 fb 55 aa 75 09 f6 c1 01 |.$...r...U.u....|
000000c0 74 04 fe 06 14 00 c3 66 60 1e 06 66 a1 10 00 66 |t......f`..f...f|
000000d0 03 06 1c 00 66 3b 06 20 00 0f 82 3a 00 1e 66 6a |....f;. ...:..fj|
000000e0 00 66 50 06 53 66 68 10 00 01 00 80 3e 14 00 00 |.fP.Sfh.....>...|
000000f0 0f 85 0c 00 e8 b3 ff 80 3e 14 00 00 0f 84 61 00 |........>.....a.|
00000100 b4 42 8a 16 24 00 16 1f 8b f4 cd 13 66 58 5b 07 |.B..$.......fX[.|
00000110 66 58 66 58 1f eb 2d 66 33 d2 66 0f b7 0e 18 00 |fXfX..-f3.f.....|
00000120 66 f7 f1 fe c2 8a ca 66 8b d0 66 c1 ea 10 f7 36 |f......f..f....6|
00000130 1a 00 86 d6 8a 16 24 00 8a e8 c0 e4 06 0a cc b8 |......$.........|
00000140 01 02 cd 13 0f 82 19 00 8c c0 05 20 00 8e c0 66 |........... ...f|
00000150 ff 06 10 00 ff 0e 0e 00 0f 85 6f ff 07 1f 66 61 |..........o...fa|
00000160 c3 a0 f8 01 e8 09 00 a0 fb 01 e8 03 00 fb eb fe |................|
00000170 b4 01 8b f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 |.....<.t........|
00000180 eb f2 c3 0d 0a 41 20 64 69 73 6b 20 72 65 61 64 |.....A disk read|
00000190 20 65 72 72 6f 72 20 6f 63 63 75 72 72 65 64 00 | error occurred.|
000001a0 0d 0a 4e 54 4c 44 52 20 69 73 20 6d 69 73 73 69 |..NTLDR is missi|
000001b0 6e 67 00 0d 0a 4e 54 4c 44 52 20 69 73 20 63 6f |ng...NTLDR is co|
000001c0 6d 70 72 65 73 73 65 64 00 0d 0a 50 72 65 73 73 |mpressed...Press|
000001d0 20 43 74 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f | Ctrl+Alt+Del to|
000001e0 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 00 | restart........|
000001f0 00 00 00 00 00 00 00 00 83 a0 b3 c9 00 00 55 aa |..............U.|
00000200

TS3212 my upgrade fails to load shortly before fully downloading

Similar Messages

Maybe you are looking for