TS3212 Tried to install itunes and I got this message. Policy 8.0 microsoft VC80.CRT type="win 32-policy' version=8.050727 6195 public key token='1fc8b3b9a1e18e3b processor architecture='x86'
Tried to install itunes and I got this message. Policy 8.0 microsoft.VC80.CRT type=win32-policy version=8.050727.6195 public key token=1fc8b3b9a1e18e3b. Processor Architecture='x86'
Hi M2i7guel,
Welcome to Apple Support Communities.
It sounds like there is an issue installing iTunes and other Windows updates on your PC. The article linked below provides troubleshooting suggestions that will resolve most issues like the one that you've described.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
I hope this helps.
-Jason
Similar Messages
-
i cant install iTunes to my Sony laptop i have this message
error occurred during the installation of assembly 'Microsoft .VC8O.CRT.type =win32" .version "8.050727.6195" .public key token="1fc8b9a1e18e3b".processorArchitecture="X86"" . please refer to help and supperror occurred during the installation of assembly
'Microsoft .VC8O.CRT.type =win32" .version "8.050727
.6195" .public key token="1fc8b9a1e18e3b".processo
rArchitecture="X86"" . please refer to help and support for more information . HRESULT:0x80070005 -
When trying to download itunes I get this error message. An errr occurred during installation of assemby " Microsoft VC80CRT type=wind32" vversion "8.9.50727.4054, public key token=1fc8b9a1e3b"processor Architecture="AMD64" Please advise
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
Hi!
I am trying to install iTunes on my laptop that runs Windows 8.1
I have tried several solutions discussed in similar questions but none worked
-uninstalled and reinstalled
-cleaned C drive for all Apple products
-tried to install security update’ Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update’ but the same error appeared
-Windows module installer is enabled
I always get this error
an error occured during the installation fo assembly "Microsoft.VC80.CRT.type="win32", version="8.0.50727.6195, public key token=,1fc8b3b9a1e18e3b", processor architecture="x86", please refer to help and support for more information. HRESULT: 0x80070422
If i ignore and proceed another error appears
Service 'Apple Mobile device' failed to start. Verify that you have sufficient privileges to start system services
If i ignore one more time, itunes is installed but when i try to run it
Apple application support was not found. Apple Application Support is required to run iTunes Helper- please uninstall iTunes and then install itunes again-error 2
Can someone help me please? Thank you!Hi M2i7guel,
Welcome to Apple Support Communities.
It sounds like there is an issue installing iTunes and other Windows updates on your PC. The article linked below provides troubleshooting suggestions that will resolve most issues like the one that you've described.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
I hope this helps.
-Jason -
hello
I am trying to install Itunes 10.5.2 to my laptop running window 7 (32bit)
I may have tried a zillion time and I am now running out of options.
-Uninstalled and reinstalled countless time
-Cleaned C drive of all Apple product countless time
-All window updates in and installed succesfully
I always get the same error messages, in the following orders during download
1)Itunes
an error occured during the installation of assembly ''Microsoft.vc80.crt.type=''win32'', version=''8.0.50727.6195, public key token=,1fc8b3b9a1e18e3b'', processor architecture=''x86'', please refer to help and Support for more information. HResult: 0x80070422
2) itunes
Service 'apple mobile device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.
3) ItunesHelper
Apple application Support was not found
Apple application support is required to run itunes helper- please uninstall itunes and then install itunes again - error 2
4)Itunes
Apple application support was not found.
AAS is equired to run Itunes. please uninstal itunes then install itunes again
error 2 (windows error 2)
thanks for your help if you know the answer.Hi all, I know this is a very old thread, but I was battling this issue for awhile and wanted to provide my solution in case future users encounter a similar issue.
I am running Windows 8. I encountered this issue while trying to install iTunes 11.1 x64 version. After some troubleshooting, I discovered that the real issue was trying to install the Apple Mobile Device service.
My resolution was installing the Microsoft Visual C++ 2005 Redistributable Package. It is available from Microsoft. A search on Google should reveal it. However, here is the latest link that I used: https://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=14431
Note that redistributable packages for more recent versions of Visual C++ (eg 2008, 2010) will NOT work. Only 2005 version worked for me.
Good luck! -
Keep getting the following error message when I try to instal itunes 10.6. An error occurred during the installation of assembly 'Microsoft VC80 CRT.type="win 32". version = "8.0 50727.61 95". public Key token = ""1fc8b3b9a1e18e3b." processor architeture = "x86". Please refer to help and support for more information.
HRESULT:0x80073712
The program then acts like it is still trying to load, but then I get another message later which reads:
Service 'Aple Mobile Device' failed to start. verify that you have sufficient privileges to start system services.
any suggestions?HRESULT: 0x80073712
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80073712, or some other number? (If they're another number, what number are you getting?) -
Itunes updates now it says MSVCR80.dll was not found? I have tried to reinstall itunes and keep getting this message?
Hello emeraldhopes,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario -
i am trying to download itunes and i get this message: service apple mobile device failed to start. verify that you have suffient privileges to start system services. what do i have to do?
Hi txatxo
Thanks for using Apple Support Communities. You may need to restart the Apple Mobile Device Service. This article has instructions for doing this:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
If that doesn't resolve the issue, I would recommend trying a thorough uninstall and reinstall of iTunes as described here:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Cheers,
- Ari -
I received the message 'The registry settings used by the iTunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result on installing other CD burning software. Please reinstall iTunes.' I have re-installed iTunes and still receive this message. Any suggestions?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
i had to reinstall my itunes, and it wont reinstall, instead saying there was "an error occurred during the installation of assembly microsoft.vc80.crt.type = win32 version 8.0.50727 6195 public key token 1fc8b3b9a1e18e3b processorarchitecture = x86.
I have taken all apple products off my computer per other suggestions, I have run malwarebytes with no viruses found, and have even tried installing itunes as a different user on my computer but get the same message everytime.See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Can't download iTunes on my laptop receive following error message- an error occurred during the installation of assembly Microsoft vc80.CRT.type="win32", version 8.0.50727. 6195 public key token= ifc8b3b9a1e18e3b process architecture=x86hresult:0073
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
When I try to download the newest version of iTunes, I get the message : "An error occured during the installation of assembly "policy 8.0 Microsoft VC80.CRT type= "win32-policy".version="8.0.50727.6195.public Key Token="1fc8b3b9a1e18e3b.processorArchitecture = "x86" Please refer to help and support.
Ok I cant find a way to fix this so I basically cant use my Verizon Iphone 4 because it wont connect on an old version...OK. You may have to reinstall everything from scratch but follow following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
How can I get itunes to install with this issue?
Try right clicking the iTunes install file and choose "Run as administrator".
If that option is not available, log in as an administrator and install iTunes. -
Can someone help me?
OK. You may have to reinstall everything from scratch but follow following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
HT1386 Cant connect to iTunes and I got this message when i connect my iphone to my itunes
cant onnect my i phone to mu itunes and this message appear "Itunes could not connect to this iphone, Could not allocate a resource."
HOW TO FIX CANNOT ALLOCATE A RESOURCE ERROR!!!
I found a fix that worked for me after failing with all the others:
IF your computer has an old cydia app called Wi-Fi Sync (you'll recognize it on your toolbar as a black silhouette of an iphone that NEVER goes away), then this is probably your main culprit. Simple fix.
1. Goto your hard drive in the finder
2. Goto Library
3. Goto Launch Daemons
4. Throw this in the trash: com.ghughes.wifisync.root.plist
5. Goto Library
6. Goto Application Support
7. Throw this in the trash: Wi-Fi Sync (it's an entire folder).
8. Restart.
9. Thank me.
Peace and Love, Peace and LOVE!
Kendrick
Maybe you are looking for
-
A slightly different problem with aspect ratio and DVD Maker
I am converting VHS movies to DVD. All are 4:3. Using Microsoft Movie Maker, I create the desired final result, a WMV file that plays perfectly--aspect ratio, sound, whatever. The problem comes when I use DVD Maker to create the DVD. The picture gets
-
Sound does not match image - ????
I am now having the same problem with my mac mini that I was having with my G4 powerbook. When in imovie I choose share and then videocamera and send the movie to a video camera, sometimes the voice of the person speaking does not match the lips. Usu
-
Just barely got my MacBook last night. Wanted to take it to work with me today, so I left it on through-out the night copying music. When I got up this morning the screen was black, which I assumed was just from going into sleep. But I can't get it t
-
I have a timecard application where I use a header and some collection regions to capture employee data. I have the header working just fine as well as the first collection region, but I can't seem to get the second collection region to update proper
-
Blog or Wiki applications built using APEX
I have been tasked with finding a ready-made solution that we can use as a developers' scrapbook where development team members can store useful hints/tips, code samples, coding standards etc etc An APEX solution would be best (something similar to C