TS3253 Is my original iPad compatible with iHome DM12 wireless speaker.  I am having trouble with pairing.  The iPad sees the device but does not connect

Is my original iPad compatible with iHome iDM12 wireless speakers?  I am having trouble pairing.  iPad sees device but does not connect.

It should be it the iHome supports the bluetooth profiles that the iPod supports. See:
iOS: Supported Bluetooth profiles
Try resetting the iHome if it was previusly paired to another device.
Also see:
'iOS: Third-party Bluetooth headsets, headphones, and keyboards

Similar Messages

  • I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s but does not connect , it shows that it wants to connect , how can you connect this?

    I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s by USB cable but does not connect , it shows that it wants to connect , how can you connect this?

    http://support.apple.com/kb/ts1538

  • Configuring the time capsule airport wlan function as "connect to wlan", the time caspule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport Express it worked!

    Configuring the time capsule airport wlan function as "connect to wlan", the time capsule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport express it worked, the single Ethernet port got the IP Parameters passed through!
    My setup is a Vodafon Esaybox connected to ISP. Time Capsule is not able to extend the wlan of the easybox, neither airport express can do.
    Only the option "connect to wlan" is succesful.
    With airport express I was able to connect my Sony Bravia TV to the lan via ethernet to stream pictures, the TV set got an IP adress from the easybox.
    With the time capsule the easybox dosn't find devices connected to the ethernet ports to submit IP adresses. The TV set get another IP adress (169.xxx.x.x.) in subnet mask 255.255.0.0 and I don not now where from.
    My notebook is a MacBook pro.
    Any idea????
    Thank a lot in advance!
    Kind regards
    Ingo

    Neverthe less, could there be the chance, that this feature could be implemnented with an firmware update?
    That would appear to be a question for Apple to answer. You can make suggestions to Apple here:
    Apple - AirPort Extreme - Feedback
    If the AirPort Extreme and Time Capsule are configured to "extend a wireless network" they will provide additional wireless coverage....and...the Ethernet ports are enabled in this type of setup.
    The "catch" here is that you must have an Apple router providing the network to be extended.

  • I HAVE A MAC G5 WITH V10.4 TIGER OS, I AM HAVING TROUBLE WITH THE LETTER "N" ONLY WHEN I USE CAPS AND SHIFT KEYS DOSE IT TYPE THE LETTER "N"SE

    HAVE A MAC G5 WITH V10.4 TIGER OS, I AM HAVING TROUBLE WITH THE LETTER "N" ONLY WHEN I USE CAPS AND SHIFT KEYS DOSE IT TYPE THE LETTER "N". I HAVE CONNECTED A NEW KEYBOARD BUT THE PROBLEM STILL EXIST. WHAT ELSE CAN I DO?

    You might look at "Keyboard Shortcuts" in the Keyboard and Mouse preference pane and see if somehow the lower case n has been inadvertently assigned to something.
    Probably the best solution would be to click the "Restore Defaults" button.

  • Bluetooth ANYCOM FIPO Pairs with iMac but does not connect

    Bluetooth ANYCOM FIPO Pairs with iMac but does not connect. Have paired and connected iMac to Bluetooth Keyboard, Mouse and a Plantronics Headset without issue. I have a Dell Latitude D620 that paired and connected with the ANYCOM FIPO so I know the device works. It is currently plugged into the iDock port in a Bose SoundDock..
    Bluetooth Device Details.
    Devices (Paired, Favorites, etc):
    FIPO:
    Name: FIPO
    Address: 00-07-88-a0-12-ce
    Type: Headset
    Services:
    Paired: Yes
    Favorite: Yes
    Connected: No
    Apple Bluetooth Software Version: 1.9.0f8
    Hardware Settings:
    Computer:
    Address: 00-14-
    Manufacturer: Cambridge Silicon Radio
    Firmware Version: 3.1965 (3.1965)
    Bluetooth Power: On
    Discoverable: Yes
    HCI Version: 3 ($3)
    HCI Revision: 1965 ($7ad)
    LMP Version: 3 ($3)
    LMP Subversion: 1965 ($7ad)
    Device Type (Major): Computer
    Device Type (Complete): Desktop Computer
    Composite Class Of Device: 1057028 ($102104)
    Device Class (Major): 1 ($1)
    Device Class (Minor): 1 ($1)
    Service Class: 129 ($81)
    Requires Authentication: No

    You may have to enter device code like 000 in phone so it can pair up.
    Try checking the box you mentioned
    Check the manual for your Bluetooth device it will tell you the code Read all of it!!!!!
    Try turning on Bluetooth just as phone is put in search mood.

  • HT201270 My ipad is displaying the carrier settings update box but does not respond to either the "update now" button or the "not now" button and has totally frozen. The ipad cannot switch off as I need to clear this box before I can "slide to shut down".

    Can anyone help me with carrier settings??? My ipad is displaying the carrier settings update box but will not respond when I press "update" or "not now". I have tried to switch the ipad off, but cannot "slide to shut down" as I need to clear the carrier settings box first!! HELP PLEASE!!!!

    Have you tried a reboot? Hold down the power and home buttons simultaneously. Ignore the Slide to Power Off prompt if it pops up. The display should go dark, and the Apple logo should appear as it begins a reboot. This is a soft reboot - it does not erase data.

  • HT1296 My contacts are synching with Outlook 2007. The synch appears to complete but does not actually update the contact data.

    I am having trouble with synching contacts between Outlook 2007 and iPhone5s via iTunes. The synch appears to work but data is not actually updating in either place.

    The information I received gave me the courage to proceed with download to allow my handheld to sync with my new Outlook 2007 running on my laptop.  It worked and I still seem to be able to sync with my Outlook 2002 version on my desktop system.
    Next problem is that I have some reurring appointments on my calendar that will NOT delete.  I have tried all methods I can find and nothing works.  Even if I get to the point where it asks if I want to open "this occurrence or open the series" (then save and delete), the darned things seem to be lurking in the future.  I have tried changing the end date or the recurrence schedule and it acts like I have entered them day by day and I can't successfully change the entire series.  Any ideas?
    Thanks so much for the help with the previous issue.  You took a worry off my shoulders.
    L
    Post relates to: Tungsten E2

  • On ipad to hp 6500A printer, message says contacting printer, but does not connect.

    New 6500A prints wirelessly ok from vista laptop and desktop. also prints from ipad printbureau app. but when printing direct from ipad email or pic, I get message that it is "contacting printer", but will not go any further to connect

    I have the HP Envy--but it's at my studio and I'm at home so I'm going off memory here, and my understanding of networking is,shall we say, limited. But, as the HP Envy is an AirPrint printer, you don't need Print and Share or any of the other wireless printing apps (although I have Print and Share).
    I have a WiFi iPad 2. After Setting up the Envy, I just joined a local wireless network using the Envy touchscreen and then joined that same network on my iPad. Then, when I choose Print in, for example, Pages, the Envy appears after the Select Printer option.
    All I can suggest is to make sure the Envy has a connection to the same wireless network as your iPad. (in my case I have to select a local network which does not have Internet access as my Envy isn't registered on the university-wide network.)
    (I did complete the initial setup of the Envy on my laptop (MacBook Pro) (and which requires a USB cable for setup) and that gave me printing and scanning options from my MacBook. I don't see how that would have any bearing on the AirPrint function from the iPad.)
    (I do think that the Envy printer is an amazingly useful little printer, especially with the ability to scan to a flash drive or SD card.)

  • I have an ipod thats from the 3rd or 4th generation, but does not have a camera and any apps I try to download it says the software is not up to date, but I checked.  How do I fix this and get the next update? My itouch is stuck with version 4.2.1.

    Please help me figure out how to get my 3rd generation ipod to have the newest software in order to download apps.  It will not let me.

    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
    Identifying iPod models
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • When trying to sync with itunes error message reads Apple mobile device not started.  I pod turns on but does not connect to itunes

    When I try to sync my ipod with itunes I get an error message which tells me Apple mobile device is not started.

    "itunes could not connect with the itunes store. An unknown error occurred (11556)."
    This error is associated with ringtones, are you trying to sync a ringtone, purchase a ringtone...need more info...
    I have also an error message saying it cannot sync and error message number 0050.
    Are you on Windows XP? Is this the error message...iTunes displays -50 error message? If so, follow these directions:
    http://support.apple.com/kb/TS1539

  • My Iphone calendar connects with my wifes calendar but does not connect with my ipadmini

    My Iphone calendar will connect with my wife's ipad calendar but I cannot get it to connect to my new ipad mini calendar.  What to do?

    My experience with hotel wifi is that it's an open, and unsecured, connection, but unless you agree to their terms on a launch page, you can't go any further or connect. Sometimes I need to force safari to come up and even make it go to a page, to trigger the auto load of the 'agree to our terms' page.
    Unless your machine is work provided so maybe could be blocked from unsecured net access?

  • My i phone search was deactived after my new iPad air had a production fault and had to return it. Now FaceTime is not working on our macbook air. any ideas how to activate FaceTime. it looks like it is working, ringing etc but does not connect.

    Hi, can anyone help please. Thanks

    Hey Gordon and Verena,
    Thanks for the question. I understand you are experiencing issues with FaceTime on your MacBook Air. The following resource may provide a solution:
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/TS4185
    Additional Information:
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Thanks,
    Matt M.

  • L7580 found but does not connect with ver 14 software

    Lenovo R61i LaptopWindows XP SP3.  connecting wirelessly from laptop to router, printer is connected via ethernet cord through a D-Link Dir-655 Router. Updated to Version 14 of all in one driver for L7580.  In set up the setup sees the L7580 on the network, I choose it slows down at 44% goes to 50% and connection fails.  I have realoded  and followed all of the trouble shooting tips... Is there anything else?  I can select the printer via the windows set up but I cannot get the HP Soulution center to install the printer so I can fax from the laptop.

    Duplicate :
    http://supportforums.blackberry.com/t5/BlackBerry-​Torch/after-restart-reset-its-hang-on-main-screen/​...
    Hi there,
    One thread is enough for an issue  
    Please check you existing  thread !
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Anyone having trouble with downloads showing up after purchasing with os 11?

    anyone having trouble with downloads showing up after purchasing with os 11?

    jcosmo wrote:
    anyone having trouble with downloads showing up after purchasing with os 11?
    Did you really mean "os 11"?  There is no such OS.
    There is iTunes 11, is that possibly what you are referring to?
    It's best to be specific about the issues that are occurring and in what version, as some versions fix issues that exist in other version.

  • Having trouble with Dreamweaver and fireworks willing to pay for support

    I'm new to the forum and i was hoping to get some help with
    dreamweaver and fireworks.
    I built a site on my own using dreamweaver 3 years ago but
    have forgotten almost everything. I am planning on building a new
    web site and have been messing with dreamweaver for over a week
    trying to figure it out, with little success. I bought a web
    building package years ago that included fireworks, dreamweaver,
    freehand and maybe more, but i lost my books on dreamweaver and
    fireworks somehow.
    Anyways, I was trying to learn dreamweaver 3 and fireworks
    and was having a lot of trouble with it. The dreamweaver bible
    assumes you know how to make a navigation bar using fireworks and
    that simply isnt the case for me. So I need help with that.
    Also, i have been having trouble with my template. This is
    how you save your basic page correct? For some reason it doesnt
    save the whole page for me. I figured out the editable regions
    part, I think, but since i didnt know how to make a navigation bar
    I made my own links out of text, and this part isnt saving with the
    template.
    I have a lot more questions but i think ive taken enough of
    your time. I am willing to pay someone to help me build this site,
    i cant afford a lot but i think my questions are pretty basic.
    Thanks

    There is a recent thread on the FW forum that may interest
    you - it's called
    "Firworks and HTML". The advice there applies in your case,
    too.
    One problem with your use of DW3 is this -
    the browser world has changed quite a bit in the almost 10
    years since DW3
    was released. Some (many?) of the behaviors in DW3 simply
    won't work any
    more because of these (significant) changes. Are you
    absolutely locked into
    using DW3?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "jfmalewitz" <[email protected]> wrote in
    message
    news:[email protected]...
    > I'm new to the forum and i was hoping to get some help
    with dreamweaver
    > and
    > fireworks.
    > I built a site on my own using dreamweaver 3 years ago
    but have forgotten
    > almost everything. I am planning on building a new web
    site and have been
    > messing with dreamweaver for over a week trying to
    figure it out, with
    > little
    > success. I bought a web building package years ago that
    included
    > fireworks,
    > dreamweaver, freehand and maybe more, but i lost my
    books on dreamweaver
    > and
    > fireworks somehow.
    > Anyways, I was trying to learn dreamweaver 3 and
    fireworks and was having
    > a
    > lot of trouble with it. The dreamweaver bible assumes
    you know how to make
    > a
    > navigation bar using fireworks and that simply isnt the
    case for me. So I
    > need
    > help with that.
    > Also, i have been having trouble with my template. This
    is how you save
    > your
    > basic page correct? For some reason it doesnt save the
    whole page for me.
    > I
    > figured out the editable regions part, I think, but
    since i didnt know how
    > to
    > make a navigation bar I made my own links out of text,
    and this part isnt
    > saving with the template.
    > I have a lot more questions but i think ive taken enough
    of your time. I
    > am
    > willing to pay someone to help me build this site, i
    cant afford a lot but
    > i
    > think my questions are pretty basic.
    > Thanks
    >

Maybe you are looking for

  • Imac freezes in safe mode yosemite

    The power in our house was suddenly disconnected in the middle of the night and when I wanted to start my imac again it froze during the start up. I can see the apple logo and the progress indicator, but it stops at about 50%. Waited all night, nothi

  • Weblogic portal vs webcerter portal

    Hi, I am newbie, start working on WebCenter Portal, but what is the difference b/w WebLogic Portal & WebCerter Portal? Thanks

  • System hardlocks when ejecting firewire drives

    Anyone else having this issue?  I've had it since the 2.6.16 kernels, and I'm currently running -8.  I have both an ipod and an external hard drive that will hang the system about 75% of the time when I "safely remove" or use the eject command and un

  • Getting ringtone from itunes

    I am trying to turn a song into a ringtone for my iphone. There used to be a ringtone symbol to do this but I can no longer find it. Is this still possible and how do I do it? thank you.

  • Bang for the buck board and ram ?

    well ive looked thru the sticky about ram and i really dont feel like spending an hour looking thru a million posts of each persons different experience with different ram so whats my best nvidia based mobo to get and which ram ? or which is going to