TS3258 First my the TV section would not play any episodes. I then upgrading to the latest version of Itunes and now I am also getting error (-42404)
My Itunes stop playback of all in the TV section.
While waiting for a response from apple, I upgraded to the latest Itunes (10.7)
Now not only not playing back TV it now is giving me an error (-42404)
I would appreciate any insite into these issues.
-Carlos
Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy
Similar Messages
-
I downloaded the latest version of itunes and now my ipod nano won't sync. The sync process appears to lock up on the 2nd song and will not continue to sync. I let it run all night the first time and it never went past the 2nd song. I unchecked the 2nd song so a different song would be 2nd, no benefit; reset my ipod nano; shut down laptop and restarted a different time; shorted the number of songs to sync; all without benefit.
When you connect your ipod up to the computer. It should show the device, usually with the name of the device, in my case 'jordan's ipod'. This should be on the row which shows 'songs', 'albums' e.t.c on the far right. There when you click on it it should go to a different screen showing a picture of your ipod along with two buttons - Update and Restore. Click update and it should take a 2 mins while your ipod is updated to the latest version of Ios.
After updating te ipod see if there is a change in results.
PS: make sure the device is active while syncing so keep tapping the screen.
Sorry for any incorrect info, i have an ipod touch, but i've had experience with an ipod -
I just loaded the latest version of itunes and now I cannot sync my notes from Outlook 2010 to my iphone. Notes no longer appears under the advanced section of the info tab. Since I have not had luck syncing in the cloud I always check the boxes and tell the sync to sync from my computer to my phone. Does anyone know how to get this to work.
When you connect your ipod up to the computer. It should show the device, usually with the name of the device, in my case 'jordan's ipod'. This should be on the row which shows 'songs', 'albums' e.t.c on the far right. There when you click on it it should go to a different screen showing a picture of your ipod along with two buttons - Update and Restore. Click update and it should take a 2 mins while your ipod is updated to the latest version of Ios.
After updating te ipod see if there is a change in results.
PS: make sure the device is active while syncing so keep tapping the screen.
Sorry for any incorrect info, i have an ipod touch, but i've had experience with an ipod -
I have always been able to create playlists on itunes, then drag them to my ipod when it is plugged into the mac. I recently downloaded the latest version of itunes, and now am unable to do that. I can drag songs and albums to the ipod, but not my playlists. It used to be so easy, am I missing something here?
Plug your iPod into your computer, it will begin to sync. Now check to see if the playlists have been added.
If not, go to the songs tab under your iPod when it is connected to iTunes, Unless you have checked "Sync all songs (or something to those words)" you should have an option on what you can put on your iPod. Make sure to check the playlists that you want on your iPod. -
just updated to the latest version of itunes and now my iphone won't sync with my email or calender because the apple mobile device is not started. Anyone know any way roudn this - Apple wish to charge me to fix this. not impressed
It is working now. I no longer get the message about the item not being available in the US and I can access the store.
-
I just updated to the latest version of iTunes and now it will not sync with my iPhone 5
I just updated to the latest version of iTunes and now it wont detect my iPhone 5 to sync. Can anyone help? I am running on Windows 8.
I have already gone into control panel and repaired the program. Nothing is working!See the tt2 user tips for help:Troubleshooting issues with iTunes for Windows updates
-
I downloaded the latest version of iTunes and now I cannot play the songs in order. It will skip around or just stop playing the song currently playing when it is finished. I just want to play an album from start to finish. The shuffle feature is turned off.
It is working now. I no longer get the message about the item not being available in the US and I can access the store.
-
I recently downloaded the newest version of itunes and now I can't get it to open
I recently downloaded the newest version of itunes and now I can't get it to open
I got that Exact message... I think I updated my version of iTunes and it worked correctly.
Hope this helps... -
Have downloaded the latest version of ITunes and now i get "Incompatable Application" I tunes will no longer open. have worked my way through FAQ and help to no avail. What am i doing wrong? currently running windows 7.
Have downloaded the latest version of ITunes and now i get "Incompatable Application" I tunes will no longer open. have worked my way through FAQ and help to no avail. What am i doing wrong? currently running windows 7.
-
Everything was fine with my iTunes library until i decided to update to the latest version of iTunes and now I'm getting to arror message "an application has made an attempt to load the c runtime library" what do I need to do to resolve this problem? I already tried to redownload it a couple of times
Hello, see if this helps...
https://discussions.apple.com/thread/5864236?tstart=0
Are you running Windows?
https://discussions.apple.com/message/16458988#16458988 -
I updated to the latest version of iTunes and now I can't go into the iTunes Store. Every time I try, the program closes. Any suggetions?
Reading multiple threads here and other sites. Very frustrating without a possible solution in sight so far.
-
I tried to install the latest vversion of Itunes and now I cannot open it because it says this version is corrupt and I should reinstall it. I have no idea what to do. Any help will be appreciated. Thanks
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
Hi there. I recently updated to the latest version of itunes, and am unable to get newly-purchased ibooks onto my ipod - I don't see any way to click and drag the ibook. Am I missing something?
Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help -
I am using OS 64 bit Windows Vista Home Premium and recently updated the latest version of iTunes. (I only have this CD burning software on my Laptop). Ever since updating, I received the message 'Registry settings for the iTune drivers are missing for CD burning'. The drivers for Lower and uppper filters in the registry are missingand I now have no optical drive. I have unistalled and reinstalled Itunes and manually entered the filters. Have tried everything including something called GEAR driver installer which was suggested on several technical sites. Everything was working fine in iTunes until I updated it.. It's strange I can still import music but not burn?? Friend s have told me they have ha dthe same problem when updating iTunes but resolved the problem by uninstalling/reinstalling or altering registry keys.
Today I went to use my Epson Printer and now have problems with it not working. I decided to uninstall/ install printer software and still can't get it to work either. I may be wrong but his all seems connected to me?
I have been trying for days to get telephone support and been told today you have to pay
Please can someone help me before I throw the lot out the window!!!!Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help -
i installed the latest version of Itunes yesterday and when I looked at my library most of my songs that i purchased lost there artwork and cannot be trnasfered to any device saying that the info cannot be located. what should i do ?
Plug your iPod into your computer, it will begin to sync. Now check to see if the playlists have been added.
If not, go to the songs tab under your iPod when it is connected to iTunes, Unless you have checked "Sync all songs (or something to those words)" you should have an option on what you can put on your iPod. Make sure to check the playlists that you want on your iPod.
Maybe you are looking for
-
Is there any way this can be done?
I have a 30GB video Ipod(2005 Fifth Gen I think) I had my ipod hooked up to my PC for a couple of years and it worked fine. Then it just stopped recognizing my ipod all together. I didn't really care that much because I had lots of music on it but n
-
Check if files exist using ABAP
Hi All, I'm currently using FM: FILE_GET_NAME_USING_PATH, and I'd like to do a check to see if the filepath with file (i.e. /com/tmp/file.txt) I am getting back exists or not. Very simple question, just not sure what to do. Thanks, John
-
When my 5th gen ipod is connected to my tower, everything works just fine. Except for one thing, I cannot manually edit the ipod library, all of the songs are dimmed out and you cannot select them to remove anything. Anyone else experience this, if s
-
Disable (all) functions on the block diagram with right-click menu
Hello to everyone, here is one more idea, which I'd like to propose. As for me, it would be useful to have the following: when all components (functions, wires, subVIs, etc.) are selected on the block diagram (like, after ctrl+A), operator could do
-
why is it everytime i go to publish to iweb, and the publishing fails - as usual - MY DISK space on my computer goes down???????!!!!!!!!