TS3274 after 3 minutes my ipad says its too hot? Whats going on?

Help! is my ipad dying? after only 3 minutes of use it keeps telling me its too hot and shuts down;-(

You should send it to Apple for a check.

Similar Messages

  • Its too hot what should i do

    In Pakistan its around 50 degree Celsius in Summer my phone gets too hot that i am afraid of it being destroyed....what should i do,

    Operating temperature: 32° to 95° F (0° to 35° C)
    Nonoperating temperature: −4° to 113° F (−20° to 45° C)
    Your phone will shut down before any damage is done, but keeping it in an environment higher than 45° C "could" damage it.

  • TS3694 ipad says its disabled. How can i fix this

    My ipad says its disabled , how do i fix it.

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • In updating to most recent ios, iPad says its gone into recovery mode - any ideas?

    When updating to the most recent iOS, my iPad says its gone into recovery mode and the only option i have is to restore to factory settings - any ideas?

    The message means what it says. Unfortunately something went wrong and you will have to restore your iPad now. If you have a backup, you can restore from the backup after you restore the iPad to factory settings. If you have no backup, you have to start all over again.
    You can download much of your purchased content again in the purchased tabs of iTunes or the app stores or if you sync with iTunes ( if you sync with iTunes you should have some sort of backup) you can sync your content back to the iPad.

  • HT4623 why does my ipad say its ios is up to date but i havent updated it to ios7

    why does my ipad say its ios is up to date but i havent updated it to ios7

    First generation iPads cannot be upgraded to iOS 7.  Which generation do you have?

  • I backed up my old mac to transfer to my new mac,but when i entered my password its saying its wrong ?what can i do ?

    i backed up my old mac to transfer to my new mac,but when i entered my password its saying its wrong ?what can i do ?

    1. [email protected], you can go here to figure out your appleid/password, and reset if needed
    2. iCloud.com, you can go here to get your numbers, but you will need your id/password.

  • TS3274 After updating my iPad, the automatic orientation of screen ---- vertical to horizontal is not working.

    After updating my iPad, the screen orientation will not stay on horizontal .  It was working fine before the update. Any suggestions?

    Some have reported success by going into the settings and 'reset all settings'
    You will need to retweak your device because it puts everything back to factory defaults.

  • TS3274 after updating my iPad i have no sound

    after updating my ipad i have no sound

    Do you get volume in any apps e.g. in Music and Videos but not in other apps and notifications ? If you do then have you got notifications muted ? Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
    If you don't get sound in any apps then have you tried a soft-reset to see if you get sounds after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. If that doesn't fix it then do you get sound via headphones - if you do then you coul try inserting/removing headphones and see if the fixes it

  • TS3274 Why does my iPad say " No SIM " in the upper left corner

    Why does my iPad say " No SIM " in the upper left corner ?

    Hi Edwardtracey,
    Welcome to the Support Communities!
    It sounds like you have a cellular data plan and there is no service where you currently are.
    The article below will explain this feature and how to turn the setting on/off.
    The article has more details and screenshots, but I've quoted highlights below for you:
    iOS: About the Cellular Data setting
    Cellular data is used for data communication in cellular networks. It does not affect your ability to make or receive phone calls or to use Wi-Fi networks for Internet connectivity. If you turn off cellular data, you will be unable to:
    See the cellular data icons in the status bar (for example, LTE or 3G).
    Send or receive MMS messages. However, you can still send and receive SMS and iMessages if you're connected to a Wi-Fi network.
    Retrieve or listen to new Visual Voicemail messages. To retrieve these messages, enable Cellular Data.
    Use Personal Hotspot.
    You can adjust this setting by going to:
    iPad: Settings > Cellular
    Additional Information
    You can also enable or disable cellular data for certain iOS features from this setting:
    I hope this information helps ....
    Have a great day!
    - Judy

  • HT1535 I have tried to add music to my ipod and it says no content but the itunes says its on there, what do i do????

    I have tried to drag music to my new ipod and it says its on there but when you eject it, says no content???*** i've had around 12 ipods and never got anything like this.

    - See if this works
    Fix for “No Content” on iPhone & iPod after iOS 4.2.1 update
    - Next try a reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Then try restoring the iPod from backup
    - Last, restore the iPod to factory defaults/new iPod and sync.

  • Everytime i go to sign a document it says my password is incorrect. I change it again today and it says its incorrect again What do i do?

    I need help with my password. It continue to say its incorrect even after i reset it

    Hi,
    Please log a ticket with support so that they can investigate this further. Include your Echosign username in the ticket.
    Thanks,
    Jat

  • *My* new iPad is also TOO HOT!

    I just want to post here too that my iPad runs SOOOOOO VERY hot!
    I mean, I'm no scientist... but I can say it gets hot enough that it HURTS TO HOLD. Not very Apple, but I am sure they will address this issue. I just wanted to post to say that little ole me is experiencing this too.
    Paul

    No, not yet. I am an Apple fanboy... So I'm buying a lot of the new products offered.
    When there's an issue, it's good for all of us to post about it. When people post, Apple takes it into consideration and will provide a fix or a statement.
    Then i can decide how to move forward. Anyone with this issue be sure to post.

  • HT4061 im not able to activate my iphone 3gs after upgrading to ios6, saying server not available, what i can do

    im not able to activate my iphone 3gs after upgrading to ios6, saying server not available try later. im not able to make my phone work, not able to bring serial # im in guatemala what i can do?

    Activation issues are almost always the result of a device that has been hacked or jailbroken.
    If this is the case, no support can be provided here.

  • HT5577 Okay so I have 2 apple accounts. One is newer & one is my old one. The older one still has money from Itunes on it & when I go to log it will not except my password. Then it asked me my date of birth & it says its incorrect. What do I do?

    Okay so I have 2 apple accounts. One is newer & one is my old one. The older one still has money from Itunes on it & when I go to log it will not except my password. Then it asked me my date of birth & it says its incorrect.So I tried to go the email route but i never get anything in my email about recovering my password. What do I do?

    Hey donnieandjamie31,
    It sounds like you are not getting the email to reset your password.  If you have a rescue email setup for your Apple ID, the reset password email will be sent there and not your Apple ID email address:
    When you provide a rescue email address, all future security emails, such as password resets from iForgot, will be sent to the address provided.
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/HT5312
    You might want to check your other email accounts for the password reset email, including their Spam folders. If you continue to have issues, please contact our Account Security Team:
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • I have broken my iphone5 and have an iphone 4.  I have an adaptor and put my sim in my iphone 4 but it says its not supported what do i do?

    I have broken my iphone 5 and have an iphone 4.  I have an adaptor to put the sim in but it says its not supported on this phone.  What can I do?

    They might have one at the Apple Store but a better chance is to go buy your cell providers store.

Maybe you are looking for

  • Macintosh HD desktop logo missing

    Hi I visited the genius bar this morning re a problem file on my new Mac Pro running 10.9.3 I was was told to create a new user with admin privileges and then use migration assistant to bring in all the files from Time Machine apart from the system f

  • Smaller images from linking Word doc not showing in RH8 Webhelp

    I am using RH8 and linking Word Documents.  Will generate as WebHelp.  All images are pasted into the word documents using Snagit.  The images are varying in size and need to be that way.  It seems as though RH8 imports larger images as .jpg files an

  • Server side file

    hi all iam developing flex application connectiong with mssql server database throught dotnet web service can i access a file on the server that does not occure in the web root of the application ? my second question is : what is the maximum ability

  • Patches are updating automatically when i ran rug refresh

    Hi i am able to see all the patches when i ran "rug list-updates" all the missing patches are automatically upgrading to higher level when i ran "rug refresh" i dont want that to be happend.. patches should be installed only when i ran "rug install -

  • Custom fields on Material Master - ECC6.0

    Hello We have added custom fields on material master basic data screen following these steps : 1) Copied Func. grp MGD1 to Z Fgrp via Spro -> Logistics General .. 2) Created a subscreen in Z fungrp by copying screen from original program. 3) Deleted