TS3274 Apple logo appears on iPad, but nothing else happens.
Earlier today, I downloaded some updated apps - about 13. I deleted a newspaper app, then did a sync. Since then, all I get on my iPad is the Apple logo. It isn't recognized in iTunes, and there is apparently no recognition of the iPad when I connect the USB to my computer. I'm running Windows7 Enterprise, and have had no problems in the nearly 3 years I've owned the tablet.
Start with this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If that doesn't help, and the device is still showing the Apple Logo only and is not being recognized in iTunes, read this about restoring via recovery mode.
http://support.apple.com/kb/ht4097
Similar Messages
-
can not switch my phone back on, yhe apple logo shows but the phone wont do anything, unknown error when trying to reboot from itunes
Does your device have a full charge? Often if you give it a full charge, that will fix the problem
If that doesn't work, plug it into itunes and run any updates that may be available.
Let me know if we are still broken after this. -
I have the apple logo on my phone but nothing else works
I have the apple logo on my phone but nothing else works, how do I turn the phone back on?
Try resetting your iPhone. Hold the on/off and home buttons together for 6 or 7 seconds till the Apple logo appears.
-
I was syncing my ipad yesterday and everything froze up. Now it tells me I need to restore the ipad. When I try restoring, itunes says its waiting on the ipad, but nothing else happens. What should I do?
Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
iphone only displays logo, nothing beyond this. any suggestions please other than two buttons pressed at same time? thanks, stu
See Here for Device Unresponsive
http://support.apple.com/kb/ts1445
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore from Backup.. Restore as New...
Try this First... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
ipad not turning on.On charging apple logo appears in between.But its not turning on,tried to restore by pressing start & home button for 10 seconds.But its not working.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
my ipad does not start or reset even. when i hold both buttons only apple logo appears and ipad wont start. plz help somebody
try restoring see guide
http://www.ipadforums.net/ipad-help/2987-how-put-your-ipad-into-recovery-mode.ht ml -
i have a nano 4th generation 8gb i have tried resetting it, i get the apple logo come up but nothing else happens. It will work in my docking station but as soon as i take it out it will not respond. any ideas, do i need a new battery?
It definitely sounds like your Nano needs a new battery at this point. You can have Apple replace it for a flat fee, send it into a third party service center to be replaced for much less, or you can purchase a new battery online and swap it out yourself if you feel up to it.
B-rock -
When I try to download apps, I am asked to answer security questions. However, when I cklick "continue", I am required to type in my Apple ID password but nothing else happens. Bottomline, I am not able to download apps at the time which is annoying.
Try downloading something from the iTunes Store on the iPad and see if that solve the password problem.
-
My mac doesnt start. All i get is the gray screen with the apple and the loading icon but nothing more happens. I tried to start it in safe mode but it doesnt help. What can i do?
If you have a external USB enclosure - trying installing your hard drive in that enclosure and connect it to your usb port - restart your macbook while holding down the options key. If you Macbook boots to your desktop then you have a faulty cable. If you get the same error, then your hard drive just died on you.
good luck. -
My Apple TV suddenly stopped working. When I hit a button on the remote the light on the apple tv flickers but nothing else happens. Anyone know how I can fix this?
I had the same problem; Apple TV was working proper then for no reason I got the continuous blinking front LED. The Apple TV has no sound or video output at all. I tried reseting the Apple TV via my Apple remote controller but that didn't do anything for me. I finally called Apple and they told me that the way to fix my box is to reset the Apple TV to factory default. So I had to attach the Apple TV to one of my Apple computers and launch iTunes. Once iTunes was running it recognized my Apple TV and I clicked on the option to restore to factory default. After the restore my Apple TV now works properly. My final action on the Apple TV was to sign into my account and enter my password.
-
Hi
i have a Mac book little bit old .and I use LR5
when i want to use the defat correction tool , i open the tool , i choose "correction" and then i clic on the defaut
a second circle appears but nothing else happens . No correction
do i miss something???
ThanxIt's sounds like you're using the Spot Removal tool. What happens depends on the Feather and Opacity controls. If the Opacity is at 0, you won't see any change. 100 will give the full healing or cloning, while feather controls the size of the edge of the healing.
-
At App Store I see that Facebook needs updating. However, when I click on "update" the blue circle appears but nothing else happens.
The blue circle should go around, clockwise, as a fine line, and then as a heavy line indicating it is downloading. Then it sits while the install takes place. It may sit and wait to start the download if the internet connection is slow.
-
I cannot open itunes on my mac. The Icon jumps, but nothing else happens.
I may have shut my computer off while a new version of Itunes was downloading. Not sure if this would affect it, but I can't open it now. When I click on the icon, it jumps a little, but nothing else happens! Any ideas?? Help! I can still open it on my iphone.
Boot from your Snow Leopard install DVD, run Disk Utility and run Disk First Aid.
Reboot.
Then Apple menu > Software Update.
Then reinstall iTunes. -
i cant seem to edit my engraving, the order is still in the processing status but when i click save changes the buttons fade slightly but nothing else happens.
not sure what to do, any suggestions?not sure about this number i live in the uk, and besides the ipad mini im buying is for my girlfried and shes in the house so i cant really call anyone about it, i was more so hoping that someone else had this problem and knew how to olve it or something, you see the engraving is in irish and i was able to do the first line correctly but the change i want to make is in adding to the second line... however as ive said nothing happens but the buttons (save changes and cancel) just fade slightly... other than that the page does not do anything else... i really need this to be edited asap because im not sure how much of a window i have to do it and i sur eyou can understand my concerns of correcting the situation over the phone when its in irish and has a very specific spelling with faddas etc.
thanks for your help though!
Maybe you are looking for
-
To release credit check while creating sales order
Hi, I have a requirement of releasing credit check for list of open sales orders of a customer while creating a new order in VA01 for a customer. E.g in va01,i'm creating sales order for kunnr ABC for kunnr ABC, open sales order existing in database
-
I purchased Adobe Photoshop Elements in Dec 2013. I have had to buy a new computer and when I try to install and when I am asked to enter the redemption code I insert the serial number but it tells me it is not valid. What do i need to do. Noel
-
Make photo grid objects into links?
I would like to make the photos and captions in the photo grid into links. When I select a photo or a caption in the photo grid, the link inspector is grayed out and I can not click "enable hyperlink". Every thing works fine for images and text not i
-
Applet Servlet Comm. Problem
Dear friends, i have an applet that sends a serialized object to the servlet,the Servlet creates another object and passes it back to the applet. Everything works fine, till i read the object with: ObjectInputStream objInputStream = new ObjectInputSt
-
Change Request SDCR- adding Actions
Dear Colleagues, In the change request transaction I can see the ACtions "Authorize Change Request" & "Reject ECR". So change manager can Authorize or reject from the actions. If change manager require more information from requester, then chnage ma