TS3274 camera screen is blank/ black and not working.

Camera screen is blank and wont work.

Try closing the Camera app:
1. Double-click the Home button to reveal the Task Bar
2. Hold down the Camera app for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Tap area above Task Bar to return to Home screen
If the above doesn't solve the problem, do a reset:
Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider

Similar Messages

  • Dropped iPod now screen is blank, restored still not working

    I dropped my ipod classic, screen blank, still plays music, tried restoring it, still nothing, any advice?

    Have you tried a hard reset yet? To do this, first make sure the hold switch has not been activated, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.  This may take a couple of tries.
    Otherwise, wait for the iPod's battery to fully drain. Then connect it to a power source charge up as normal. It might be necessary to restore the Nano via iTunes after that as there may be corrupt files still leftover from improperly ejecting the iPod.
    B-rock

  • To whom it may concern      Hi my name is Silvana Pires,I purchased an I Phone 4 S Model A 1387 EMC 2430 SCC.ID DCG E  2430 AIC.579 C-E 243 A in California one year ago,Unfortunately its Not working well the screen is getting black,and the phone is in goo

    To whom it may concern
    Hi my name is Silvana Pires,I purchased an I Phone 4 S Model A 1387 EMC 2430 SCC.ID DCG E
    2430 AIC.579 C-E 243 A in California one year ago,Unfortunately its Not working well the screen is getting black,and the phone is in good shape I can prove it,the Apple support in Brazil doenst work like in USA.
    I look forward to your reply and a resolution of this problem.
    Thank you very much!!!

    You are welcome. I'm glad you got it back up.
    (1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
    (2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
    (3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
    (4) Add some SARE rules:
    Visit http://www.rulesemporium.com/rules.htm and download the following rules:
    70sareadult.cf
    70saregenlsubj0.cf
    70sareheader0.cf
    70sarehtml0.cf
    70sareobfu0.cf
    70sareoem.cf
    70sarespoof.cf
    70sarestocks.cf
    70sareunsub.cf
    72sare_redirectpost
    Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
    backhair.cf
    bogus-virus-warnings.cf
    chickenpox.cf
    weeds.cf
    Copy these rules to /etc/mail/spamassassin/
    Then stop and restart mail services.
    There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

  • HT201263 My iPod touch suddenly stopped working. It was fine, but when I went back the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. What should I do?

    My iPod touch suddenly stopped working. It was fine earlier, but when I went back a few hours later, the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. I thought it just needed to be charged but there seems to be a larger issue now. What should I do?

    Let your ipod die. Then when it is dead charge it adn turn it back on. After that it should be fine.

  • Hi friends, I'm having troubles with my Ipad 2. I was working with it and suddenly the screen distorted. Now it is not possible to get it back to work properly. In fact, the screen is now black and nothing I have done makes the Ipad works again. Thanks

    Hi friends, I'm having troubles with my Ipad 2. I was working with it and suddenly the screen distorted. Now it is not possible to get it back to work properly. In fact, the screen is now black and nothing I have done makes the Ipad works again. Please Help. Thanks in advance.

    I think you should make an Genius Appointment.
    Genius Appointment
    http://www.apple.com/retail/geniusbar/

  • HT1414 My Ipod Touch have a black screen when an app shut down and I can not shut down the Ipod. The screen is still black and I did the press two buttons solution and it doesn't work. What I have to do now?

    My Ipod Touch have a black screen when an app shut down and I can not shut down the Ipod. The screen is still black and I did the press two buttons solution and it doesn't work. What I have to do now?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Aspire v5-571 screen is suddenly black and bios not working

    aspire v5-571 screen is suddenly black and bios not working
    kindly help me to solve this problem.
    thanks in inticipation.
    Jawad
    [edited to comply with guidelines]

    JAWAD1,
    Look over this article and see if that helps solve your issue.

  • My iPad is suddenly not loading any apps.  When I click on an app, the screen flickers to black and then back to normal, but will not load the app.  This is ALL the apps, not just one.  Have tried rebooting, to no avail.

    My iPad is suddenly not loading any apps.  When I click on an app, the screen flickers to black and then back to normal, but will not load the app.  This is ALL the apps, not just one.  Have tried rebooting, to no avail.

    Was a Restore one of the things tried.?  [Attach the iPad to your computer and in iTunes click on your device. On the Summary page click on Restore and go through the process. Be sure to click YES to Restore from a previous backup.]

  • My iphone 4 screen just went black and will not come back on, I can connect it and charge it and it makes noise but no screen?

    What does it mean when your screen just goes black and will not turn back on? I can connect it to computer to charge and it recognizes it and charges it but no picture on screen.

    Hey Krkirst10,
    Thanks for the question. It sounds like you may have a hardware issue with your device, however let's try to isolate as much as possible to determine if that is so. To isolate the issue, follow the regular troubleshooting steps for power issues:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    1. Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    2. Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
    Learn about LCIs and corrosion.
    3. Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    4. After at least 30 minutes, if:
                   - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen. Then unplug the phone from power. If it immediately turns off, seek service.
                   - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
                   - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    5. If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
                   - If the display turns on, go to step 4.
                   - If the display remains black, go to next step.
    6. Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    7. If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    For additional information, see this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thanks,
    Matt M.

  • I just downloaded the recent Maverick Software Update onto my Macbook Pro 15" and when the download/reset finished, my screen was completely black and I have not been able to get it back since. Help?

    My computer had been wanting to do a software update, with what I believe was the Mavericks Software, for a few weeks but I had been putting it off. When I finally decided to install the update onto my Macbook Pro 15" today, my screen went completely black and I haven't been able to get it back since. The computer still turns on, I can tell because my caps lock key still glows when I press it and my volume buttons still make sounds when I press them. However, I cannot see anything on the screen. I don't even get the grey start up screen when I reset my computer. I have tried the SafeMode Restart where you hold Shift while it is restarting and the Display Reset in which you hold Command + Option (alt) + R + P until you hear the start up noise twice, and neither have worked. Any other advice on what I can do to get my screen back without having to send my computer away to be fixed? 

    Try a SMC reset:
    http://support.apple.com/kb/ht3964
    Ciao.

  • Ipod photo stuck in disk mode and screen is in Black and white

    came to use my ipod photo after about a week of not using it. when i took it out the colour screen was in black and white and the screen is stuck to saying it is in disk mode with a large tick.
    the ipod will mount and does show up in itunes it will even play songs via itunes. i have tried resetting to no avail and my next option was to restore to factory settings which i am loathe to do as i have songs on my ipod that are no longer in my itunes library.
    anyone had similar issue or can suggest a fix
    thanks

    well the problem has been solved...hope this may help others having this issue.
    i basically just let the battery run out, then connected the ipod to my laptop and voila...it reset and all is well again...
    pretty random, but glad it is all working again.

  • Why is my 5s screen on in black and white?

    Why is my 5s screen only in black and white?

    Hello 2bblues,
    Thanks for using Apple Support Communities.
    I'd like you to first check your Accessibility settings on the iPhone to ensure grayscale is not enabled.
    See the screen in grayscale. Go to Settings > General > Accessibility, then turn on Grayscale.
    Invert Colors and Grayscale
    Take care,
    Alex H.

  • My buttons arent working and my screen is just black and its playing music, help me!!

    my buttons arent working and my screen is just black and its playing music, help me!!

    Hello yung_jvyden,
    So your iPhone is on or it wouldn't be playing music yet you can't seem to "wake it up" as the buttons aren't responding.
    There's a section in this article for buttons not responding.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    If your device doesn't respond when you press buttons
    Your device might not return to the Home screen when you press the Home button, wake from sleep when you press the Sleep/Wake button, slide to unlock or power off, or it might appear frozen. Try these steps:
    Restart your device.
    If it still doesn't respond, or if it doesn't turn back on, reset your device.
    Note it links to 
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Thank you for using Apple Support Communities.
    Nubz

  • Hello , ive reset my iPhone 5 and the option i selected was the one where all you content gets removed as i wanted , but now my screen has bona black and all that appears is the white circular loading sign which keeps spining. it won't stop ? help?!

    hello , ive reset my iPhone 5 and the option i selected was the one where all you content gets removed as i wanted , but now my screen has gone black and all that appears is the white circular loading sign which keeps spining. it won't stop ? help?! im not able to access my iphone becasue of this and i dont know what to do

    I just tried deleteing every smart mailbox and re-constituting a few. This went OK until I made one that had to reference a Gmail IMAP 'folder' and as soon I did that ... BAM! ... the infinite spinner appears.

  • GarageBand crashed, screen wen't black and my iMac won't start-up!

    Hello
    I was working on a new track in GarageBand and while I just imported a new audiofile the programm/iMac crashed and wen't black. There was only the indicator in front of the screen that's blinking. I've only been working on my new iMac for two weeks. I finally swithced from pc. Everything worked fine.
    I tried to restart the iMac but it won't boot! The screen still stays black and the indicator is blinking.
    What can I do?
    iMac 20" dualcore 1GB   Mac OS X (10.4.6)  
    iMac 20" dualcore   Mac OS X (10.4.6)  

    Lawyer? You think some lawyer wants to take on an issue like that? Who's gonna pay for it? By the time he got rolling the repair would be done anyway. It just one of those situations. You buy a new machine and it breaks you DON'T get a new one it gets repaired.
    No amount of acting like an idiot in the store at the "Mall of America" (or whatever other store you got it in somewhere in the country) is going to get you a new one. No amount of phone calling, No amount of emails. Nothing. They will simply tell you over and over its not policy to give you a new machine but rather to honor the limited warranty the machine comes with. (My experience made me purchase the extended warranty just out of fear).
    If you buy the machine and it worked and then it stopped working even a day later THAT falls under the limited warranty. You wait for the repair. if it cannot be repaired for whatever reason then you get a new machine.

Maybe you are looking for

  • I am trying to hide a column in a gridview but need access to the data in these fields.

    I have a gridview with columns that I want to hide but still need to access this data at the row level. What is the best way to achieve this? (Using Visual Studio 2013)

  • Command -` for switching windows within an application

    I ran an update to 10.6.5 last week and suddenly I appear to be unable to scroll between tabs within an application using Cmd - `. For example, using safari i was able to scroll between tabs using this keyboard shortcut, and in excel I was able to sc

  • ESS Debugging

    Hi portal gurus, Iam trying the blog "Simple way to debug ESS and MSS Web Dynpro Java based applications - Very useful technique" at Simple way to debug ESS and MSS Web Dynpro Java based applications - Very useful technique In this blog by debugging

  • Installation d'Adobe Creative Suite 6 Design Standard

    Je suis incapable d'installer le logiciel. De plus, mon numéro ne fonctionne pas.

  • Scrambled files

    I recently had a new hard drive installed in my Imac because tech. shop said my old one could not be repaired. They had transfered all my files to their computer before they tried to restore the original disc. After the new installation they put back