TS3274 Can not get my sound to work on games apps

Can anyone help. Cannot get any sound on my games apps, I think my son has had his hands on it again. It has happened once before but I can not remember how to switch it back on.
PLEASE HELP
THANKYOU
MIKE

Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
 Cheers, Tom

Similar Messages

  • Help, please! i can not get the sound to work on my pc

    i can not get the sound to work on my pc

    Try opening the device manager and remove your sound hardware and then rediscover.  This works often.  Let me know how it goes.
    iGirlTech

  • Help... I can not get my microphone to work

    Help.... I can NOT get my microphone to work with my Blaster X-Fi XtremeGamer Fatal1ty Professional card. When I plug it in and test it (in either Configure Speech Recoginition - Windows Vista / or in Counter-Strike Source, Test Microphone Button under the game options) both indicate that the system is not receiving any sound. However, both the speakers (5.1) and headphones work fine. I am using a Plantronics headset.
    I am not sure what I am doing wrong. Below are my complete system specifications. Let me know what additional information you need, if any.
    -Michael
    PS - Seems like I have a similar problem to this post (http://forums.creative.com/creativel...&message.id=58)
    Motherboard: MSI K9A2 Platinum Socket AM2+ ATX
    CPU: AMD|PHENOM 9600 2.3GHz
    RAM: GeIL Evo One 8GB(4 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Quad Channel Kit
    Video Card: Two (2) ATI Radeon HD 3870 512mb ddr4 w/hdtv & DVI - CrossFire Enabled
    Power Supply: CORSAIR CMPSU-750TX TX 750W Power Supply
    Monitor: Samsung 305T SyncMaster 30in Analog/Digital LCD Monitor
    Hard drives: Two (2) Seagate Barracuda 7200.11 ST3500320AS 500GB 7200 RPM SATA 3.0Gb/s
    Optical Drives: Two (2) Lite-On Super-Multi LH20A1H Lightscribe DVD Burner, PLEXTOR px-810sa 18x DVD+/-rw dual layer/dvd-ram SATA
    Additional PCI cards: HAUPPAUGE wintv-hvr-1800 dual tuner ntsc/atsc/qam pci express, Creative 7.1 Channels PCI Interface Sound Audio Card: Blaster X-Fi XtremeGamer Fatal1ty Professional
    Number of fans present: Seven (7) [2 Front - 1 Center - 1 Side - 1 Rear - 1 Power Supply - 1 CPU]
    Video Card Drivers in Use: Catalyst Control Center
    Message Edited by mac19406 on 02-10-200807:57 PM

    Here is the fix:
    http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=29191

  • Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode

    Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode
    Hello, I am having problems migrating data from my old PC running XP (SP3) to my new Mac Pro 2012 using the Migration Assistant.
    - I downloaded and installed the Windows Migration Assistant from Apple
    - My Mac recognized PC and displays passcode
    - The sasscode does not show / display on my PC
    - My Mac is then stuck in "authenticating" loop and the PC is stuck "waiting for Mac to connect."
    - Both computers are connected on same network (have connected PC on WIFI and using ethernet to Reuter)
    I have looked on support site and only response I saw says to reinstall Windows Migration Assistant (which I have done)
    Any ideas?  If cant get this to workare there instructions for manually bring across relevant data eg itunes music and apps, photos, picasa data etc?

    Why not turn off the Windows firewall and uninstall any other firewall software you have installed?
    If you are using a Norton product uninstall it and discard it. To fully unistall most Norton products you have to go to the Norton website and download a soecial program to completely get rid of it. The normal uninstall feature built into the program will not remove all of it.

  • Can not get Software Update to work in Mountain Lion, switches to App Store

    Can not get Software Update to work in Mountain Lion, switches to App Store

    Software Update is now in the Mac App Store...
    See Here  >  Re: Software update on Mountain Lion

  • After update to OS4.2.1 I can not get the ringer to work for incoming calls

    after update to OS4.2.1 I can not get the ringer to work for incoming calls. If I set Vibrate on, that's the only notification I get. Tried everything including blowing away ALL my apps and restoring phone to new. Lost all my apps but the ringer still won't ring

    God Bless u! LOL I have an otterbox case on my phone and had no clue that the mute button was there....Thank you so much!! The volume on my movies & everything else worked...even when I would go into "settings" and adjust the volume of the ringtone. I knew it was something simple...Thanks again..

  • I can not get my facetime to work. I have a wireless connection but I can not get my facetime to work

    I can not get my facetime to work. I have a wireless connection but it is not working.

    Doublechecking, Jensen. What's the precise text of your error message, please? (There's a few different ones I can think of that you might be getting.)

  • HT3867 can not get my wifi to work in any other location than my home. How dow I get it to work in other locations?

    can not get my wifi to work in any other location than my home. How dow I get it to work in other locations?

    What happens at those other locations? Error messages?
    Do other devices connect to those other locations?
    What kind of networks are they?

  • Can not get my cam to work on skype

    I can not get my cam to work when using skype - any ideas? cam is working when in photo booth....

    Then you have a problem with Skype. Check their forums for input.

  • Can not get my emails to work on iPad?

    Can not get my emails to work on iPad?

    google
    <Insert mail provider> guide Ipad
    if following the guide of your  mail provider does not result in fixing your problem
    then maybe your carrier block the required ports your mail provider need in order to send you mails

  • I can not get face time to work on my sons ipod touch any ideas

    I can not get face time to work on my sons ipod touch - it just keeps going back to the verify screen even though my apple user account shows the email is verified and the ios update has been refreshed. even tried hard restart. help ? his grandad wants us to use it whilst we are away skiing this coming week .........!!

    Maybe here:
    iOS: Troubleshooting FaceTime and iMessage activation

  • I can't get any sound to work on my iPhone 4S unless I have the headphones plugged up. Help...

    i can't get any sound to work on my iphone 4s unless the headphones are plugged up

    http://support.apple.com/kb/TS2802

  • I can not get the debugger to work on oracle studio 12.3 - It will not attach

    I can not get the debugger to work on oracle studio 12.3 - It will not attach

    APN for Tmobile is epc.tmobile.com
    MMSC is http://216.155.174.84/servlets/mms
    Here are the instructions:
    Create devel catalog (appl from this catalog can damage your phone but don't have to so if you are not sure about your needs or skills dont use it and wait for official applications from Nokia or firmware update) The software hosted in Extras-devel is NOT ready for normal users! PLEASE PLEASE PLEASE don't play with it unless you really know what you are doing. Be ready to file proper bug reports instead of posting complaints. Expected problems: crashes, battery drain, poor system performance, full disk space & more - SERIOUSLY! Don't play with Extras-devel if you haven't backed up your data or are prepared to re-flash your device.
    Application manager --> Application catalogs --> New
    Catalog name: Extras-devel
    Web address: http://repository.maemo.org/extras-devel
    Distribution: fremantle
    Components: free non-free
    Refresh catalogue
    Install fAPN and fMMS
    Run fAPN and create new APN with MMS setting which you can get from your operator or find on this page (this may not be needed for all users, see note below)
    Run fMMS and it will start with configuration
    Put APN name the same you named your MMS APN point during fAPN configuration
    Type MMSC which you can take from your operator
    Type your number starting with +
    Put max size of pics you want to have in outgoing MMS
    Save all and start sending MMS from fMMS menu.
    It is very important to put correct setting in new APN and be sure if there is proxy needed in your operator.
    WHEN YOU GO TO MMS to set your configuraions, the information should look like this
    MMSC: http://216.155.174.84/servlets/mms
    Resize Image: 300
    Your Phone Number: +##########
    NOW U ARE DONE!! =)

  • Can't get ac3 sound to work

    I have rent a movie and cannot get ac3 to work properly.
    I have rent movies before so it's nothing wrong whit my computer. But this time I can't get any sound at all is it to do whit iTunes update I am running the last update for iTunes.

    Quicktime, Quicktime Pro and iTunes don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
    See:iPod plays video but not audio.
    You need a 3rd party converter to convert the file with both audio and video.
    See this for help: Guide to converting video for iPod (Mac/Windows).

  • I can't get the sound to work

    I just got the 
    HP ENVY Phoenix 810-160 and I can not for the life of me get the sound to work.  I am using it with a HP Envy 23 inch monitor that also has Beats audio and an HDMI cord hookup.  I have gone through all the steps on the monitor support page and the desktops support page.  Any help out there?  Thanks in advance.
    This question was solved.
    View Solution.

    Hi,
    No, this is not going to work, you can't hook the desktop to the AiO 23 and get sound from the AiO 23.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for