TS3274 cant configure wifi
I bought my mom a "New iPad" for mother's day and she can't connect to her household wifi right out of the box. I thought perhaps it was ineptitude on her part so when I visited this weekend I tried myself. I turn it on, it asks me what language to communicate in and one other question, then the wifi screen pops up and while her network appears, you can't connect to it. You can't really select it. Any ideas?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Similar Messages
-
hey all..i hv problm .. i cant connect wifi properly ..its disconnect itself after evry 5 mints and reconnect after evry 5 mints.. signal showing but there is no avail internet ..plz helpe...sorry for bad english but hope u will understand..
If your connection won't 'stick', check for interference in that area from other devices on competing channels, etc.
Configure your choice of band/channel with interference robustness, but mainly reduce the sources to be sure it's not just a too noisy environement.
Still no joy, be sure your software is up to date and then walk it into the nearest Apple store for a professional opinion
Good luck in any case. -
How can I transfer an App purchased on iTunes on my pc to my iPhone 4s. I have tried synching but this does not make the app appear on my iPhone. I cant use wifi as my chip was fried on the latest update.
When you tried syncing, did you connect the phone, then click on the phone icon near the top left of iTunes, then click on Apps under Settings in the sidebar, then find the app in question and click the Install button beside it before clicking Sync at the bottom right?
-
Cant find wifi,Help!
My iphone's hardware is broken??? I cant find wifi???,Help!!!
alex87109 wrote:
Ive tried everything !!!
Have you tried turning your Home router Off for 30 seconds and then turing it back on... -
IP discovery tracking. Cant configure under interface.
I was tasked to re-IP a network and its being done by floor. I need to figure out what iP addresses are connected to ports on each switch. Half the range is being re-numberd while others stay the same. Everything is currently on the same subnet and VLAN so I can differentiate by VLANs. There are over 1000 hosts so tracing mac to ip addresses through "show ip arp" will take entirely too long. I have been using "ip device tracking" on all of the 3750 switches and it works great but I cant configure it on the two 4506-E switches I have. I can configure it globally but the option is not available under the interface. Its running IP-base-12.2(53)SG upgrading to ip services in a week. Has anybody had this issue, or am I missing a command somewhere. I check the configuration guide and its shows that the config is valid for that platform and ios.
BTW: I cant configure it on the core 6513 either its running advancedenterprise12.2 (53)
Sent from Cisco Technical Support Android AppI was tasked to re-IP a network and its being done by floor. I need to figure out what iP addresses are connected to ports on each switch. Half the range is being re-numberd while others stay the same. Everything is currently on the same subnet and VLAN so I can differentiate by VLANs. There are over 1000 hosts so tracing mac to ip addresses through "show ip arp" will take entirely too long. I have been using "ip device tracking" on all of the 3750 switches and it works great but I cant configure it on the two 4506-E switches I have. I can configure it globally but the option is not available under the interface. Its running IP-base-12.2(53)SG upgrading to ip services in a week. Has anybody had this issue, or am I missing a command somewhere. I check the configuration guide and its shows that the config is valid for that platform and ios.
BTW: I cant configure it on the core 6513 either its running advancedenterprise12.2 (53)
Sent from Cisco Technical Support Android App -
Need configure wifi, but adobe air cd won't install, why?
Am trying to configure wifi after installing new motorola wireless modem sbg901 and am trying to run the cd wifi instrux.
It asks to install Adobe Air, but it won't install. Why can't I install Adobe Air?Thanks for that link. Got it downloaded.
It appears that something is wrong with my laptop... because the downloaded file stalls at the same point as the disc. While it still says "Installing Shared components". This is when the green progress bars stop(about 10% of the way) and the HDD activiity light on the laptop stops as well.
Back when I reinstalled windows, I had some issues updating. Once I got to a certain point, one of the updates would render my laptop screen completely blank.... so after reinstalling a few times, I stopped installing updates at a certain point... though I did make it to Service Pack 2.
That's the only reason I can think of, as to why the program won't install. It's really odd.
BTW: I did shut down the antivirus while attemptinng Premiere install. -
While restoring password on my MacBook, cant connect wifi
I tried to restore my MacBook account password. It put me to the restoring menu and asked to enter my Apple ID and password. The problem is when I am in that menu MacBook cant connect wifi. I tried to connect it during the loading (holding ctrl), but in this way it disconnects and puts me to that menu again, so I cant enter any menu to connect wifi, it only asks me to choose the language and than continues with this password resroring menu. What I have to do?
OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite
Reset Password
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse pointer to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box under “Select user account”.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”. -
Hello there
i bought iphone 3gs from china unicom and u didn't find wifi on it i searched and i didn't find a reason can someone help me plz tell me what should i do to connect to find where is my wifiFeras89 wrote:
i think China unicom delete it when they made it because i update it and still i can't fine Wifi and i restore it 3 times still i cant fine wifi
I think it is more likely that you have been given a fake, which have been spread across china in particular. They look amazingly similar to the real thing, and that would explain the lack of Wi-Fi, since the makers of the knock-off could save money by leaving out the Wi-Fi antenna. -
cant get wifi to work on ipod
would help if you added more then that
as in what set up is on your router, what have you tried etc -
Cisco 3640 cant configure voice-ports
I've an cisco 3640 with a VWIC-2MFT-E1 network module. Can anybody tell me why i cant configure any voice-port? without able to configure voice-port, i cant assign any port for my "dial-peer voice xx pots". Anybody has any solution?
what im trying to do is sending voice data traffic to 192.168.10.1
controller E1 1/0
framing NO-CRC4
clock source line primary
channel-group 0 timeslots 1-31
interface Serial1/0:0
bandwidth 2048
ip address 192.168.10.2 255.255.255.252
ip mtu 300
encapsulation ppp
no ip route-cache
no fair-queue
no cdp enable
dial-peer voice 777 pots
destination-pattern 77T
no digit-strip
direct-inward-dial
forward-digits allI've only got this from my controller E1
Vertigo(config-controller)#?
Controller configuration commands:
channel-group Specify the timeslots to channel-group mapping for an
interface
clock Specify the clock source for a DS1 link
default Set a command to its defaults
description Controller specific description
detect Enable detection of loopback request
exit Exit from controller configuration mode
framing Specify the type of Framing on a E1 link
guard-timer Guard timer (0-20) for xcsp calls - timer duration and
accept/reject on expiry
help Description of the interactive help system
line-termination Specify the line termination for E1
linecode Specify the line encoding method for a E1 link
loopback Put the entire E1 line into loopback
mode Configure the controller mode
no Negate a command or set its defaults
shutdown Shut down a E1 link (send Blue Alarm)
tdm-group Configure DS0 group for TDM
Do i need DSP for the voice-ports? Please guide me on what more module i need to get. Thanks!!
https://supportforums.cisco.com/message/3022639;jsessionid=AF45FBC0DDB8636D70F9B526A367016F.node0 -
I have an iphone 4S and stupidly let it update to iOs 7 and now I cant get wifi or bluetooth. Anyone know how I can get back the previous update when my iphone was working perfectly?
Your WiFi/Bluetooth chip has failed. Bring the phone (and $199 if outside the warranty period) to Apple for replaceement.
-
my iphone 4 cant find wifi. i have reseted wifi and iphone, but it still isnt working! it just stopped yesterday. please help!
You could try syncing the contacts with yahoo or google contacts, then sync them to the iPhone. Or, export the contacts and then import them into one of the aforementioned servicse, or iCloud, then sync to the phone.
-
TS1398 I cant activate wifi function or bluetooth after new OS update
After i updated it started having trouble staying connected to a wifi network, so i restarted the phone and now i cant activate wifi or bluetooth.. It just says off and cant turn it on..
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
iPhone 4 cant detect wifi at all. I tried resetting the network settings (It didnt work). I also tried rebooting but it also didnt work. Also tried putting the name and password on the wifi>choose a network>other But it still didnt work.
Im using IOS 7.0.2 Im not able to update it yet to the latest 7.1.2 cause it requires wifi network.
I dont want to use my data plan all the time when i have wifi at home. your help will be greatly appreciated.Hi nanxsh,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your Wi-Fi.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
I hope this information helps ....
Have a great day!
- Judy -
Hi i m using 4s and its updated but i cant configure with microsoft exchange for my gmail account. Anytime i tried to configure it the message comes connection to the server failed. Pls help me out.
<Email Edited by Host>Discontinued by Google. Read here:
http://googlesystem.blogspot.com/2012/12/google-sync-discontinued-for-gmail.html
Maybe you are looking for
-
Playing icecast stream with flash-plugin problem
Hello, i've got a problem playing an mp3 stream from a livecast server with the flash-plugin (version 8,0,24) on IE (version 6.0.2900.2180.xpsp_sp2_gdr.050301-1519) On my pc it plays fine, on another pc (with the same versions) it doesn't play at all
-
Can't view man pages on solaris 8 x86
Hi, I installed solaris 8 on a intel x86 machine not using the webwizard because I wanted a minimal installation. When I try to view man pages I get the following error: man manReformatting page. Please Wait...Invalid SGML. File cannot be formatted s
-
Everytime i go into the app store ( from itunes ) and press get app, it downloads into itunes under applications in the library but how do i get it into my touch .
-
Hi All, I'm currently performing a setup in User Role Managment around roles for a department. We've identified 11 roles we need to create and the responsibilities that need to be assigned to the roles. We've created a Role Category so all our setups
-
Hi Experts, Now I want to use a batch input recording to implement LSMW.We all konw that we can get return message if we use call transaction like below. CALL TRANSACTION CALL TRANSACTION 'VA01' USING V_IT_BDCDATA OP