TS3274 dropped ipad now screen doesn't display

My daughter dropped her ipad and now the screen doesn't display anything. We can see some light changes but nothing else. It appears that the screen can still be touched to use apps because we are able to play music. Any suggestions on what we should do?

Not sure if you've fixed this, but it really works. After reading similar advice, I banged it on the corner of my couch and the display totally came back clear as day. Could not read it before.

Similar Messages

When I turn my iPad the screen doesn't turn?

When I turn my iPad the screen doesn't turn- please help?

On the top (near the battery indicator) do you see a little circle with a padlock in the middle? If so, there's a slide switch by the volume toggles. flip that switch and see if it restores the accelerometer

Youtube video screen doesn't display with firefox 3.6.15 and adobe flash plug-in 10,2,152,32 installed.

The video screen (and its controls) doesn't display. All the other parts of the screen display correctly.

Yep, looks that way to me, too. There's (right this second) '''147''' folks on this thread: ->https://support.mozilla.com/en-US/questions/789534 and
'''504''' on this thread: ->https://support.mozilla.com/en-US/questions/776670?page=2#answer-143849, not counting our''' 7 '''on this one (my screen's white, too). There's indications that it's a Google/Adobe thing, or a Google/YouTube thing. (That one's after linking Goggle Acct with YouTube.
And yes, it was still messed up in Safe Mode.
My take on it is to removing/disallowing cookie setting on YouTube for now, till '''whoever '''finally gets it fixed.
I hope they'll send a email telling all of us when it's fixed. Heaven knows they have our addresses...
OOPS--and another '''93'''on this thread: ->https://support.mozilla.com/en-US/questions/789443 And '''117''' on this one:->https://support.mozilla.com/en-US/questions/789576

Since IOS 5 iPad video app doesn't display correct art for shared videos.

Hello,
I like to watch my movies located on my mac computer over my network to my iPad. Ever since I installed IOS 5 on my iPad when browsing shared movies on iPad the artwork doesn't match the movie making it difficult to pick the correct movie. When I select a movie, then the correct movie artwork shows up before selecting play. when clicking back(Shared) button the artwork flips back to the incorrect artwork in the move list. I've tried rebooting my mac, rebooting my iPad. I even restored my iPad with no success. This problem didn't start until I installed IOS 5 on my iPad. Apple can you please fix this!!!!
Ken
[email protected]

It doesn't work.. I have already tried many ways to close the app. This is the step by step guide I have to follow every time I want to close the video app:
1. When everything doesn't react - press the lock screen button.
2. press it again (or the home button) and slide the screen to unlock.
3. Now the Application doesn't have any picture. Just a black screen, but sound is still running, and it still doesn't react when I am doing anything. Now this was the tricky part to experience, because now I simply press the home button one time and after 12-15 seconds, the application hides and I am back to home screen. (sound still playing.)
4. Open the task bar and close the app. (Sound is still playing)
5. Press lock screen button. (sound stop playing).
6. Unlock the screen and open the video app again to start over.

Satellite M30X-111 screen doesn't display anything but external monitor works

My laptop screen just doesn't display anything (look like when the computer is off) but when I connect the external monitor, then the desktop will be displayed on that monitor. I tried to recover the laptop using the recovery disk and it worked again, but today, it stopped working again.
I again have to plug in the external monitor, and after I tried to reboot, I keep pressing F8 but the start up mode doesn't come up, only the sound of when you keep pressing a button for too long beeps, however, the laptop monitor works again.
How do I fix this problem?

Hi
According to your first posting I presume that LCD display on your notebook is defective. If you can not see BIOS settings or Toshiba welcome screen there must be some display problem.
Experiment with external display is to be sure that graphic card is not responsible for that. In your case it works with external display and graphic card can not be responsible.
Like I said try to enter bios settings and report if you can see Toshiba welcome screen.

TS3274 My Ipad 2 screen stopped working his morning. I've rebooted it. No joy. I've restored it. No better. What next? Who do I take it to?

My Ipad 2 screen stopped working his morning. I've rebooted it. No joy. I've restored it. No better. What next? Who do I take it to or what else can anyone suggest please......

If you have reset to Factory Default and it still doesn't work; bring it to an authorized Apple Sevice Center.

TS3274 My IPAD 2 camera doesn't seem to work. It doesn't want to go thru and seems to be on "hold".

My IPAD 2 camera doesn't seem to work. It doesn't want to go thru and seems to be on "hold".

By 'hold' do you mean frozen or the shutter doesn't open ? Have you tried closing the Camera app completely and seeing if it works when you re-open the Camera app ? From the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camer app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Custom Screen doesn't display properly

I am on SRM 5.5 and I have created a custom screen with a custom field in all the proper structures it's supposed to be in. The screen has been generated into HTML and it has a service. I am calling the screen in the BADI BBP_CUF_BADI. The field is showing properly, but my problem is that my custom screen is not displaying where I expect. If I generate the HTML template as a type classic, it doubles my fields when it displays and it shows them at the top of the header above all the other standard fields.
If I create my HTML template as WEBGUI, it covers the entire Header section and displays partly at the top over the standard buttons on the screen and partly at the bottom after the last header field. I presume the custom screen should display after the last header field. Does anyone know why the screens behave differently when I generate the templates as Classic (shows twice) versus WEBGUI and does anyone know what I might be doing wrong?
Points will be rewarded.
Thanks,
Marty

Hi
There seems like a bug in the SRM system...
Have you created a bespoke service in this case ? Please give some more insights in next reply ?
Meanwhile, go through the links which might help ->
Contract Custom fields are not showing
Re: New Tab in Bid Process Screen
Re: New screen with table control information in Process Bid Invitation
BBP_CUF_BADI_2
Regards
- Atul

After rendering a movie, the DVD project screen doesn't display

Q. After rendering a movie, my DVD project screen won't display?

Hi and welcome to the forums!
Sorry to hear about your mishap.
Do you have a backup using desktop manager? If so, your data is in there. Had you recently sync'd with outlook?
Did water get into your BB? If so, place your BB in an open container of UNCOOKED white rice and set in a warm place for a few days. Rice should absorb the water.
Let us know!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

TS3274 What to do after being dropped? Now screen is black and gray.

What do I do if I dropped an Ipad and now it has a black/gray screen and won't do anything?

Sorry, but dropping is accidental damage, and it's not covered by your warranty. You can take it to the apple store and see wha they can do or see about an 'out of warranty replacement', read pay a reduced fee to swap out your broken one for a refurbished replacement.

My screen doesn't display. do i need a new iPad?

My iPad charges, and displays on my computer when connected. But the screen is blank. Has this happened to anyone else.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipadhttp://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htmhttp://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274http://support.apple.com/kb/TS3274
 Cheers, Tom

TS3274 My iPad "froze" and doesn't respond

Hi all,
I have an iPad 4. It recently started showing the "apple" whilst working on it, as if it "faded out". Now it just "froze". No responding, turning on or off.... nothing.
What can it be?

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Dropped ipad black screen

Dropped my iPad from bottom drawer- not more than a foot. Now will not turn on. Slight blue/black light showing, but blank screen. Anything I can do other than taking in to repair?

You could try a reset and see if that makes any difference : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. If that doesn't work then yes, you will probably need to contact Apple

Dropped iPad back screen turned red

My iPad fell off of a shelf and the black light turned red on the screen I was devastated! After looking up on the internet what people with this similar issue have done most said to just try dropping it again and worked for many. I first dropped it at about 2feet w/ case on flat, but the screen was still messed up, then I tried dropping it at 2 feet by the corner of the iPad at that did the trick! I am so thankful I dont have to junk this one, thanks iPad forum :)

If your black light screen is now red from dropping your iPad, then try dropping it from about 2 feet on one of the bottom corners( there are 4 corners on the iPad) so it will be a tiled vertical drop.. So don't just drop it flat on the ground. And try to do it on a carpeted or rubber surface for less impact. Also leave the case on so there is no exterior damage

Screen doesn't display anything. GT70

Me as a few other I have seen on the forum is having the problem were the laptop simply refuses to use anything but the Intel HD 4000 video card. I tried several different maximum performance settings to no success. I went into my device manage and display manager to see if the computer even knows it has the GeForce GTX 670m video card. It acknowledges the video card and I thought. If i disable the Intel HD 4000 it has to use the GTX 670m right? WRONG. The screen went completely black and refuses to display anything. I have absolutely no idea what to do now and need your help. I have tried hooking it up to another monitor but still nothing.
I dont understand in the first place why it refuses to use the graphics card I have paid for. Without it it has the same performance as my 4 year old 800£ computer I upgraded from.

Removing the HD4000 that is used for non 3d load display of course results in a black screen as the Nvidia is only meant for 3D load.
For the switching working make sure your notebook has SCM (for Win 8): http://www.msi.com/service/download/utility-19670.html and Nvidia VGA OC (for Turbo/Win8): http://www.msi.com/service/download/utility-19690.html or S-Bar (for Win 7): http://www.msi.com/service/download/utility-19324.html and Nvidia VGA OC (for Win 7): http://www.msi.com/service/download/utility-18804.html installed

TS3274 dropped ipad now screen doesn't display

Similar Messages

Maybe you are looking for