TS3274 I can't get any volume on my I Pad.
I can't get any volume on my I Pad. My grandson used it to play games yesterday. Today it makes no noise
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
Cheers, Tom
Similar Messages
-
Hi there. A common question but I can not get any of our iphone/touch/pad to be recognised as a device on itunes on a PC with XP. ANy quick solutions?
jrburrows wrote:
Ok, fair enough. But since Job's death - Apple's control on leaks has been terrible. I got the new iPhone, and I like it - but it hasn't made nearly as big as an impression as previous ones. Because of the vast ammount of leaks. With the iPad mini leaks, it's 99% sure to come out next week.
Apple uses many manufacturers and it's massive also websites prefer to report on Apple whether true or false because it brings more hits.
Amd by "others" I meant other people on iPads - not other devices/manufacturers. It's possible to do so, I just want to know how. I honestly don't think we'll ever be in a Post-PC era until all tablets allow us to use USB in the way computers do.
No, USB is not the future, you missed the memo about cloud and wireless computing? -
TS3274 How can I get the volume to work?
We have an iPad but can't get the volume to work?
Alright now if you are talking about issues using Safari, here a few things that you can try.
1. Quit Safari completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
2. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
3. Clear Safari. Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
I can not get any volume on the ringing tone when somebody is ringing me can you help
I can get any volume on my ring tone when people are phoning me can you help.
Hello, Martin Stuart.
Thank you for visiting Apple Support Communities.
I would recommend making sure the vibrate switch is not engaged. If the ringer switch is set to audible alert, try the steps in the second article below.
iPhone: Ringtones
http://support.apple.com/kb/ta38610
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Cheers,
Jason H. -
There are black dots below some of my icons and I can't get any volume
there are black dots below some of my icons and I can't get any volume
OS X 10.10.1 Yosemite
Black dots under the icons in the Dock?
If an application is running, it is normal seeing a black dot under the application in the Dock.
Closing the window doesn't make the application quit.
Quit the application from the menu bar.
Sound
1.Plug in and remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
2. Reset PRAM. http://support.apple.com/kb/PH14222
Do this twice
3. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for: "Resetting SMC on portables with a battery you should not remove on your own". -
Can't get any Volume while watching Bloomberg TV
I have a MacBook Pro running OSX 10.4.9. I like to watch Bloomberg TV on my laptop but since I upgraded from my old PowerBook the the MacBook Pro I have not been able to get any sound. When I click on the TV icon on the Bloomberg web site Quicktime lights off and a pop out screen appears. The sound icon appear active in the lower left hand corner of the screen but no sound. I checked all the settings and cant find where I'm going wrong. Any body have any ideas? Thanks
I'm still confused about what's not happening here. I deleted Flip4Mac out of my application folder and downloaded WMP9 for mac. While looking through all the preferences settings in Safari, WMP and Quicktime, I noticed the Flip4Mac icon was still in my systems preference screen. So I looked through the preferences in Flip4Mac. The Audio screen there was in grey and won't let me make any selections. Does anyone know why? (Bloomberg - I still get video but still no audio. I dont have this audio problem with any other content from any other source. That's what has me stumped!) Thanks in advance
Macbook pro Mac OS X (10.4.9) -
I can not get any volume at all from my hp pavillion dv6 notebook pc.
I have done nothing differently? Any suggestions? It isnt on mute and I have checked the volume in the control panel.
This question was solved.
View Solution.Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp58001-58500/sp58226.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
No sound out of earphones. Yes, cord is all the way in the jack. Screen shows tune is "playing", but I can't get any sound out. Help
If this is the case, I recommend to visit Apple store to request for replacement. Cheers!
-
I believe I have Apple TV installed, but with no functionality. Was able to select a TV show but with voice from another show--couldn't ever get rid of that voice or do any volume changes. I have sharing set in itunes but can't get any music. Can't access any streaming from laptop, iPad, or desktop--all on same network.
In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first. -
Recently, I can't get any sound from my game applications. Sound works fine with video, streaming, etc, but not my game applications. I've tried powering down and re-booting, but the sound does not return. Can anyone help me?
Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't on the side switch is set via control centre instead : http://support.apple.com/kb/HT4085 -
I downloaded firefox in order to do some online training that I couldn't open in any other browser. I can't get the volume to work in this browser. I can use internet explorer and the volume works. But I can only do the training through firefox.
You can click the Volume icon on the Windows Taskbar near the clock and click the Mixer link at the bottom to open the mixer.<br />
You can adjust the volume level for each application in that window, so make sure that Firefox is not muted or set at a low level.<br />
Current Firefox versions use the plugin-container process to run plugins, so you need to check the volume setting for the plugin-container process.<br />
You will only see the Firefox program or the Plugin Container in the Mixer if you are on a website that plays sound.<br />
See also:
* https://support.mozilla.org/kb/No+sound+in+Firefox
* https://support.mozilla.org/kb/Video+or+audio+does+not+play -
I can't get any sound from my ITunes library. The IMac is set to internal speakers, the volume bar on ITunes itself is all the way to the right, there seems to be no problem with the speakers themselves (they play sound from internet videos, for example), but I can't play music from the ITunes library on the IMac. Please help!
Is it possible that you have iTunes set to send audio through AirPlay to an AirPort Express, Apple TV, or other AirPlay device (which is itself not turned up so you can hear it)?
-
Why don't I get any volume in iMovie?
Why don't I get any volume in iMovie, whether using the internal mic or hooking up fast track to it with a condenser mic I comes through but no volume?
Can you please try the first solution mentioned at :- http://helpx.adobe.com/elements-organizer/kb/organizer-video-playback-errors-issues.html and see if the issue goes away?
-
My phone thinks the headphones are plugged in and I can't get any sounds. How to fix?
My iphone 5 thinks that the headphones are plugged in and they are not. I used them earlier today but they are no longer plugged in to the phone. I can't get any sound (text alerts, ringing, etc) on the phone outside headphones. Any ideas on how to fix?
I have resolved my own problem thanks to reviewing other discussions. The solution that worked for me and that was suggested by an Apple store associate some time ago was to plug and unplug my headphone jack into the iPad four times. On the fourth time leave the headphone jack connected and rotate the plug clockwise, then remove and try your sound. When you use the external volume control the HEADPHONE label should be gone. It appears I have to do this now every time after I've used my headphone jack.
-
Is there a way to get a version of the Garage Band app that runs on version 5.1.1? I have an iPad 1 and can't get any higher iOS. The App store is telling me that Garage Band only runs on iOS 7.
Unfortunately the answer is still no.
Maybe you are looking for
-
i know it is not a question but i needd help it is soo annoying and i just wanna look at my pictures and email them to friends and family. whe i try to click on a pic on iphoto, a balck exclamation point pops up and won't let me view the picture. i a
-
Hate the new Firefox - is there a way I can uninstall and go back to old one?
How do I uninstall Firefox 4 and go back to old version? 4 is a disaster
-
Hi, We are using dsee 6.3.1 in a mutli-master configuration. We are using insync in a script to monitor our replication status. We have an alert which is sent anytime a delay of more than 30 seconds between 2 replicated instances occur. We have this
-
What is the best operating system i can run
Processor 2 GHZ Intel Core Duo Memory 2 GB 667 MHZ DDR2 SDRAM, currently running Version 10.4.11 <Title Edited by Host>
-
'Sensible' Definition & Security settings for a Production APEX environment
Hi Folks. What's the feeling on Definition and Security settings for a production APEX application? Here are my settings for my UAT environment (not quite in production just yet) Debugging: NO Status: AVAILABLE Build Status: RUN APPLICATION ONLY Auth