TS3274 i CANT GET MY VOLUME TO COME ON
I can't get my volume to work
Is it no sound, or no volume? If the former see here, and in particular the latter part. http://support.apple.com/kb/HT4085
Similar Messages
-
My volume button seems stuck,i cant get the volume to go up,any ideas?
ON my ipad2 the volume button is stuck,i cant get the volume to go up.any ideas?
Thanks for the link ..so far I was only able to acces the utility disk, it says my disk needs repair but while attempting to repair it I get the following: Invalid record count...Any ideas on what should I try next????
I appreciate your help! -
I cant get any volume from YouTube video with safari. With Chrome it's OK
I cant get any audio volume from YouTube video playing in Safari. In Chrome its OK
1. System Preferences > Flash Player > Advanced > Delete All
Press the "Delete All" button under “Browsing Data and Settings”.
Install Adobe Flash Player.
http://get.adobe.com/flashplayer/
Download it first.
The next step is important.
Click Safari in the menubar and select “Quit Safari”.
Follow the prompts and install it.
Restart computer. Relaunch Safari.
2. Allow Plug-ins
Safari > Preferences > Security
Internet Plug-ins > "Allow plug-ins"
Enable it.
3. Safari > Preferences > Privacy > Cookies and website data:
Press the “ Remove All Website Data” button.
Press the “Details” button.
Remove YouTube related cookies.
4. Safari > Preferences > Extensions
Turn those off and relaunch Safari.
Turn those on one by one and test. -
I cant get my Nano to wake up
Have you tried a hard reset? See this article for instructions on how to reset your iPod.
http://support.apple.com/kb/ht1320
Otherwise, try letting it charge for an extended period of time and then attempting to reset it again.
If nothing else, it's likely a hardware issue, possibly a dead battery, meaning you'll need to have it serviced. I would recommend making a trip to your local Apple store/Genius Bar to see if there is anything they can do for you.
B-rock -
TS3274 I cant get my music to sync to my ipad mini, is there any way to help this?
I recently purchased a new iPad mini but havent been able to get my music to sync on to it, could anyone help me out or give me any advice at all?
You have to give us a little bit more information.
Where is this music now: on a Mac, on a PC, on an iPhone, in iTunes Match?
Where did it come from: iTunes, CDs, other downloads?
How have you tried to sync the music to the iPad, and what results have you received: error messages, crashes, grayed-out buttons, just no action? -
After putting my phone back to restore settings ( only way i could get it off headphone setting) I cannot get full sound out of it it is showing it is on full volume but you can hardly hear it ring. It's a 3gs
This is an interesting subject .... I recently got a Sansa Clip (great MP3 player for the price) but the volume at max was pitiful. A search on the internet showed that due to an EU directive (I think) the volume was capped. I found instructions to reset the device and instead of Europe enter USA during the setup process. I did just that and now the volume is fine - much louder. So ... this may be a legal requirement imposed on us (and Nokia) by our elders and betters (HAH).
Extract from another website;
"Finally, your comment on European Union iPods. You are correct, all iPods (and all other makes of mp3 player) sold within the European Union (EU) countries have lower volume output than those sold in the rest of the world. This is because the EU has decided that we should be protected from ourselves."
So iPods seem to be subject to this as well - from my knowledge it applies to any device capable of playing sound - and I suspect this includes mobile phones.
The regulations have been introduced as listening to 85db for more than 40 hours a week, or 89db for more than 5 hours per week have been shown to have long term damaging effects on hearing. Given the fact that on public transport I can regularly here the music (from so-called personal devices) of half a dozen young people round me, I wouldn't be surprised if half the population currently at teenage is deaf by the time they are 30.
My current phone - Samsung Galaxy Note -
I cant get the volume controls to work. The only sound it will make is the ringer
My volume control will not work. I can only hear ringer if I change it in the settings
Hi gavinruth,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180
Cheers,
- Judy -
Cant get call phone to come on my page even though...
i click call phones and no dial pad enters nor my friends/contacts HELP [edited for privacy]
If you have followed the instructions in the support document, then there is likely a hardware problem with the phone. You can make an appointment at the Apple Store to have the device checked if you like. There is no cost for that, however if the device is defective, since it is out of warranty, you can either take it as it is and see about a 3rd party repair, or you can get an OOW replacement from Apple. The cost for a 3G is $149 in the US. If not in the US, you can check at this website, http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne change your location and see what the price is for you.
-
when i open ffox it doesnt even come to hm page, i cant navigate. it shows this
Unable to connect
Firefox can't establish a connection to the server at en-us.start3.mozilla.com.
* The site could be temporarily unavailable or too busy. Try again in a few
moments.
* If you are unable to load any pages, check your computer's network
connection.
* If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
i have checked my firewall and stuff like that there are no restrictions on firefox on my computerOpening in the side bar is the default for bookmarks that are created via a link or button on a website.<br />
You can check the Properties of a bookmark via the right-click context menu in the side bar (Ctrl+B; Cmd+B on Mac).<br />
In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.<br />
Make sure that "Load this bookmark in the side bar" is not selected.<br /> -
need help getting the screen to turn on
Darlene170 wrote:
I am having this same issue. I tried resetting the device, since the screen is black there is no apple.
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps... -
I cant get any volume to work on my laptop except when im in i tunes then it works great
no volume except on i tunes on the laptop what could cause this? and how to fix it
u can uninstall plugin like gtlak , facebook or other and restart your windows then check it
-
no volume on my mac
u can uninstall plugin like gtlak , facebook or other and restart your windows then check it
-
Hello Im Having A Problem With Itunes im Not Able to reinstall itunes at all nor quicktime and bonjour service is not working either .i have tried tweaking my firewall but to no avail hoping someone can help me cos apple sure cant typical like politicians they sway away from the problem and blame someone else ?.
Well you need to understand the behavior of h-reap or what it's called now, FlexConnect. In this mode, the clients are still remembers on the WLC until the session timer/idle timer expires. So switching between SSID's in h-reap will not be the same when switching when the AP's are in local mode.
Take a look at the client when connected in FlexConnect in the WLC GUI monitor tab. Thus will show you what ssid and vlan the client is on. Now switch to a different ssid and compare this. It's probably the same because the client has not timed out. Now go back to the other ssid and look again. Now on the WLC, remove or delete the client and then switch to the other ssid at the same time. Or switch SSID's and then remove the client. The client will join the new ssid and in the monitor tab, you should see the info.
There is no need to have clients have multiple SSID's unless your testing. Devices should only have one ssid profile configured to eliminate any connectivity issues from the device wanting to switch SSID's.
Sent from Cisco Technical Support iPhone App -
My imac is stuck on mute? cant get any volume.
Does anyone know how I can fix this? I tried the obvious places to unmute, but to no prevail.
Usually resetting the SMC will clear it.
Resetting the SMC (System Management Controller) on Intel-based Macs:
http://support.apple.com/kb/ht3964
Resetting your Mac's PRAM and NVRAM:
http://support.apple.com/kb/ht1379 -
Cant get my iPhone to come online that was taken.
Is their a way to turn your Iphone on from another device so that it will be able to be tracked by the find my ophone?
No.
Maybe you are looking for
-
why is itunes saying "iphone could not be synced because this computer is no longer authorized for purchased items that are on this iphone"
-
A stubborn executable jar: refuses to execute
i'm trying to make an executable jar to be activated by double-clicking (on a Windows system). trying it on a simple example works well end-to-end. trying it on my app i get only partial success. when i run it using: java -jar lipidia-1.1.0.jar ev
-
7920 with Leap: association ok, but get no IP-Address
...first time that I configured a 7920 phone. A laptop with the same leap settings get an ip-address without any problem, but the 7920 not, even authentication is successfull. Static address on 7920 works fine firmware version is 7920.3.3-01-03. Do I
-
After printing with Capture & Print addon, printers won't restore
When I captured an area to print using this addon version 0.1.9.2 I had to zoom out to enlarge the document to read it. After it printed on 2 different printers, an HP LaserJet 4L and a Brother Color, the printers now when printing from Google Maps p
-
all the lights are flashing the only way to stop is disconnect power cord this even happens when power button is off