TS3274 I pad disconnects from Internet when using it

When I am using my I pad on the net / wi fi it disconnects randomly. Anyone any ideas .

I would update the firmware of the wifi router to the latest's from the manufactor

Similar Messages

Disconnects from internet when it goes to sleep

I have Mountain Lion on an iMac I purchased in 2010. Once I installed Mountain Lion, it started disconnecting from the internet when it goes to sleep. Does anybody know how to repair?

Oh yeah I forgot to say I use an ETHERNET connection.

Macbook air keeps disconnecting from internet when going to sleep mode

New macbook air keeps losing Internet connection when going into sleep mode. Have tried deleting and re adding network and adding DNS 8.8.8.8 still is disconnecting.
Also, since Lion update 2 days ago Internet is very sluggish
HELPPPPPP!!!

You're not the only one. See here:
https://discussions.apple.com/thread/3704539?start=0&tstart=0
The current fix is to turn off sleep mode or use an Ethernet cable.

WebStart Fails to load cached app when disconnected from internet under Apple OS-X

Java WebStart broken under OS-X
Our Java WebStart application fails to re-launch when disconnected from the internet.
Instructions:
Running OS-X 10.8 or 10.9 with internet connected.
Launch a WebStart application (e.g.. from http://www.dsuk.biz/Downloads/SmartType/SmartType2.0.19/APPLICATION.JNLP)
Disconnect from internet.
Relaunch the application either with the downloaded JNLP file or the installed desktop shortcut.
I get "Unable to launch application" error with following exception:
java.net.UnknownHostException: www.dsuk.biz
at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:184)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:392)
at java.net.Socket.connect(Socket.java:589)
at java.net.Socket.connect(Socket.java:538)
at sun.net.NetworkClient.doConnect(NetworkClient.java:180)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:432)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:527)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:211)
at sun.net.www.http.HttpClient.New(HttpClient.java:308)
at sun.net.www.http.HttpClient.New(HttpClient.java:326)
at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:1167)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect0(HttpURLConnection.java:1103)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:997)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:931)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream0(HttpURLConnection.java:1511)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1439)
at com.sun.deploy.net.HttpUtils.followRedirects(Unknown Source)
at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
at com.sun.deploy.net.BasicHttpRequest.doGetRequestEX(Unknown Source)
at com.sun.deploy.cache.ResourceProviderImpl.checkUpdateAvailable(Unknown Source)
at com.sun.deploy.cache.ResourceProviderImpl.isUpdateAvailable(Unknown Source)
at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source)
at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source)
at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.launch(Unknown Source)
at com.sun.javaws.Main.launchApp(Unknown Source)
at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
at com.sun.javaws.Main.access$000(Unknown Source)
at com.sun.javaws.Main$1.run(Unknown Source)
at java.lang.Thread.run(Thread.java:744)
I have reproduced with Java build 1.8.0-b132 and 1.7.0_51
Java Web Start 11.0.2.132
Using JRE version 1.8.0-b132 Java HotSpot(TM) 64-Bit Server VM
Re launching the application under Windows 7 when disconnected from the internet seems to work fine (tested in virtual Windows 7 64 bit VM under Parallels). It used to work fine on OS-X!
RANT/QUESTION
WebStart over the last two years has given me no end of headaches with deployed applications mysteriously breaking when either Oracle or Apple have made changes. So far WebStart just has not been a reliable and robust means of deployment.
Is WebStart to be taken seriously as a deployment vehicle for a commercial application or should I be looking at other solutions?
Also: How do I report bug to Oracle? Do you have to pay for support in order to report bugs?

Java WebStart broken under OS-X
Our Java WebStart application fails to re-launch when disconnected from the internet.
Instructions:
Running OS-X 10.8 or 10.9 with internet connected.
Launch a WebStart application (e.g.. from http://www.dsuk.biz/Downloads/SmartType/SmartType2.0.19/APPLICATION.JNLP)
Disconnect from internet.
Relaunch the application either with the downloaded JNLP file or the installed desktop shortcut.
I get "Unable to launch application" error with following exception:
java.net.UnknownHostException: www.dsuk.biz
at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:184)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:392)
at java.net.Socket.connect(Socket.java:589)
at java.net.Socket.connect(Socket.java:538)
at sun.net.NetworkClient.doConnect(NetworkClient.java:180)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:432)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:527)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:211)
at sun.net.www.http.HttpClient.New(HttpClient.java:308)
at sun.net.www.http.HttpClient.New(HttpClient.java:326)
at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:1167)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect0(HttpURLConnection.java:1103)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:997)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:931)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream0(HttpURLConnection.java:1511)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1439)
at com.sun.deploy.net.HttpUtils.followRedirects(Unknown Source)
at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
at com.sun.deploy.net.BasicHttpRequest.doGetRequestEX(Unknown Source)
at com.sun.deploy.cache.ResourceProviderImpl.checkUpdateAvailable(Unknown Source)
at com.sun.deploy.cache.ResourceProviderImpl.isUpdateAvailable(Unknown Source)
at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source)
at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source)
at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.launch(Unknown Source)
at com.sun.javaws.Main.launchApp(Unknown Source)
at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
at com.sun.javaws.Main.access$000(Unknown Source)
at com.sun.javaws.Main$1.run(Unknown Source)
at java.lang.Thread.run(Thread.java:744)
I have reproduced with Java build 1.8.0-b132 and 1.7.0_51
Java Web Start 11.0.2.132
Using JRE version 1.8.0-b132 Java HotSpot(TM) 64-Bit Server VM
Re launching the application under Windows 7 when disconnected from the internet seems to work fine (tested in virtual Windows 7 64 bit VM under Parallels). It used to work fine on OS-X!
RANT/QUESTION
WebStart over the last two years has given me no end of headaches with deployed applications mysteriously breaking when either Oracle or Apple have made changes. So far WebStart just has not been a reliable and robust means of deployment.
Is WebStart to be taken seriously as a deployment vehicle for a commercial application or should I be looking at other solutions?
Also: How do I report bug to Oracle? Do you have to pay for support in order to report bugs?

After installing visual studio, I get continuously disconnected from internet

Hi all.
I just installed Visal Studio 2013 Community on my new Acer R13 with W8 Pro. After installation, I get continuousy disconnected from internet. It seems to be something with the virtual adapter that VS creates in order to run WP emulators. Some times I have
to wait a minute or two and the connection comes back up, but sometimes I have o restart my system in order for it to work. Has any one run into this? Any suggestions?
The same thing happend o me on my old latop, a Samsung Chronos Serires 7. I used to think it was a problem with that compuer, but now it seems like a VS or Windows issue.
Thanks.
:. HUGONNE .: Please mark as answer if the post helps. Coding tips - http://hugonne.blogspot.com/

Hi Hugonne,
Based on your issue, to check this issue is related to the VS IDE or your Windows OS, I suggest you could try to install same version of VS on other machine check the issue.
(1) If you get same issue, I suggest you can try to repaid or re-install the VS2013 Community and then reset the VS setting check this issue.
(2) If you did not get same issue, I suggest you try to check your network connections on your windows. If the network connections did not have issue, maybe you will need to repair or re-install your OS check this issue again.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My 1st generation Time Capsule/2007 keeps shutting off and disconnecting from internet? What could be the problem? How long do the Time Capsules usually last?

My 1st generation Time Capsule/2007 keeps shutting off and disconnecting from internet? What could be the problem? How long do the Time Capsules usually last?

That it is still working is miraclous.. most have died.. lots started flaking out at 18months to 2years..
See deadtimecapsule.org
The few that remained now seem to have reached EOL.. you can repair if you have some skills.. fairly cheaply.
But it is well and truly time to replace.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair

Why does My I-pad drop the internet when I open several sites.

My I-pad drops the internet when I open several sites. Why?

If you are saying that Safari crashes when you open several Tabs then:
Most likely the problem is bugs in Safari which are crashing the App.
You can try Settings > Safari > Clear History and Settings > Safari > Clear Cookies and Data.
That might help but report these crashes and the sites that cause them to Apple at:
http://www.apple.com/feedback/ipad.html

How to transfer range parameter from vb when using bapi calling

Hi,everyone.how to transfer range parameter from vb when using BAPI calling?

Did you get the solution to your problem? Can you please share it with me. I have a similar problem. I have a VB program that calls RFC function. It works with a single parameter but not with a range of parameters. If you have the solution, could you please share sample codes with me? Thank you so much.

I am unable to get dragging guides from rulers when using CS6 InDesign. Is anybody else getting this problem?

I am unable to get dragging guides from rulers when using CS6 InDesign. Is anybody else getting this problem?

Try restoring your InDesign preferences:
Trash, Replace, Reset, or Restore the application Preferences

Do I have to be connected to internet when using illustrator through creative cloud? And can I change the language on the trial version if I would extend it to pay version? Thank you in advance.

Do I have to be connected to internet when using illustrator through creative cloud? And can I change the language on the trial version if I would extend it to pay version? Thank you in advance.

Lelisa it is only necessary to connect to the internet periodically to receive updates and validate your membership. If you have an annual membership you can be offline for up to 99 days. You can find additional details at Activation & Deactivation Help.
I would also recommend reviewing Creative Cloud Help | Install, update, or uninstall apps which discusses adjusting the installation language.

PAD DISCONNECTS FROM WIFI AFTER A SHORT TIME HARD RESTART IS REQUIRED TO CONNECT AGAIN

MY IPAD NEEDS TO BE HARD RESTARTED EVERYTIME BEFORE I CAN ACCESS MY WI FI ANY IDEAS?

Franco Solerio wrote:
Since I updated to iOS 5.1 my iPad (1st gen) disconnects from WiFi network after 30 minutes. I did a full system restore with iOS 5.1 and the problem persists.
How to replicate:
Disable auto-lock
Connect to wifi network
Open an app that continuously does network activityYou might for example run a shoutcast webradio streaming app and start listening to some music
Leave the iPad running and turned on
After approx 30 minutes wifi drops and your music app stops the stream
This happens to me every time, after approximately 30 minutes, with either the iPad on USB charge or disconnected from charge.
Used to run apps connected to wifi regularly for hours and never had this problem before the upgrade to 5.1
I already tried to:
Restore network settings
Completely wipe and restore iPad to 5.1
Reboot wifi router
My router is a Netgear 834 G
try updating your router firmware http://support.netgear.com/app/products/family/a_id/1288

HT4589 How do I change the audio to dual mono from stereo when using Share to DVD in Final Cut 10.1?

How do I switch the audio to Dual Mono from Stereo when using Share in Final Cut Pro 10.1? Even though the audio is all in dual mono in the timeline, it lists it as stereo in the share box.

Hi rationale1,
Welcome to the Support Communities!
The share to DVD settings in Final Cut Pro X use the Dolby Digital settings which are stereo for DVDs. So this can’t be done directly in Final Cut Pro X.
The link below will explain the Dolby Digital parameters and options in Compressor 4. You may need to research a different DVD authoring software to achieve your desired result.
Dolby Digital - Compressor 4 User Manual
http://help.apple.com/compressor/mac/4.1/#cpsrb71736a2
Dolby Digital
The built-in Dolby Digital settings (in the Create Blu-ray and Create DVD destinations, as well as the built-in AC-3 and EC-3 audio settings) use the Dolby Digital transcoding format. This format encodes Dolby Digital (AC-3) and Dolby Digital Plus (EC-3) audio files that contain multiple audio channels, including 5.1 surround sound. You can also create custom settings that use the Dolby Digital transcoding format.
Note: All files intended for video and audio DVD authoring must have a 48 kHz sample rate as required by the DVD specification.
DVD Video: Choose this option if you’re encoding for use in a DVD video authoring application.
DVD Audio: Choose this option if you’re encoding for use in a DVD audio authoring application.
Tip: For stereo encoding, rates of 192 kbps and 224 kbps are typical and will produce good results. For Dolby Digital 5.1 encoding, a rate of 384 kbps is recommended. For 5.1 Dolby Digital Plus encoding, a rate of 192 kbps is recommended.
Cheers,
Judy

My i pad is new at xmas it keeps disconnecting from internet my lap top is fine and ive tried resetting wi fi on i pad. can u help.

my i pad was brand new at xmas but keeps disconnecting from the internet. my lap top is fine and i have tried resetting the i pad. can u suggest anything else

Hi and thanks for your help, it was only my ipad that kept disconnecting from the internet but i think this happens when there are a lot of users on the same channel. it has been ok today so far, so, thanks again.

Macbook Pro freezes when disconnected from Internet

I'm so frustrated, I was doing important work and now I'm about to pull my hair out, I need to finish what I was doing but I can't even turn on my computer without it freezing, I literally can't even move the mouse because it freezes right on loading screen every time I restart, here's the story.
I disconnected the Internet for just a few seconds, then the computer froze. So naturally I restarted the computer, but each time I restart, it just freezes, I can't move the mouse, I can't click on anything, it's just frozen. Let me know how frustrating that is that you don't have computer access after working on important files.
I have a 2008 non unibody Macbook pro with OS X mavericks, I knew the computer froze when I turned off wifi, but I correlated that with the app that I was running, since I wasn't running the app this time, I thought I could turn off wifi no problem.
But like I said, now I can't even restart or use it at all. I can't even use safe mode because it freezes there too. I can do the cmd+shift+ctrl+r thing and I can connect to the Internet that way, but there's nothing I can do from there. Once I restart, the Internet connection is still disconnected in the main operating system.

Okay I solved the problem. For anyone who runs across this issue in the future, here is the solution:
Step 1) Turn on the computer and hold CMD + Option + S, this will boot the computer into single user mode
Step 2) Type in "Mount -uw /"
Step 3) Type in "vi /Library/Preferences/SystemConfiguration/preferences.plist"
Step 4) Scroll down until you find this part:
<key>Interface</key>
<dict>
        <key>en1</key>
        <dict>
                <key>AirPort</key>
                <dict>
                        <key>JoinModeFallback</key>
                        <array>
                                <string>DoNothing</string>
                        </array>
                       <key>PowerEnabled</key>
                        <false/>
                        <key>RememberJoinedNetworks</key>
                        <true/>
                        <key>RequireAdminIBSS</key>
                        <false/>
                        <key>RequireAdminNetworkChange</key>
                        <false/>
                        <key>RequireAdminPowerToggle</key>
                        <false/>
                </dict>
        </dict>
</dict>
Step 5: Edit the part where it says:
<key>PowerEnabled</key>
<false/>
and change it to <true/>
Step 6: Hit Ctrl + X, hit Y for Yes, press enter.
Step 7: RESTART AND YOU HAVE YOUR COMPUTER BACK!!
I panicked by the way because as someone said earlier, it's nearly impossible to fix:
You cannot fix this problem with Safe Boot, Repair Permissions, Repair Disk, re-install Mavericks, restore from Time Machine backup, reset the SMC, reset PRAM, or boot into single-user mode. Thus far, the only solution is to boot from a (homemade) Install OS X Mavericks USB, erase the hard drive, perform a clean Mavericks install, re-install your applications, and manually restore your data.
Anyway I'm thankful for Ira Wolf 81 for figuring out, he deserves all the credit for this, I merely repeated his steps and found out he was right. Cheers.

Please help! iMac randomly disconnects from internet. Wi-fi via BT hub. I am baffled by all of the suggestions when I google this problem! Any simple solution? Thanks!

Please Help! My brand new imac randomly disconnects from the internet. We have a BT hub - wi-fi. I have googled this issue and see that it is relatively common and it is incredibly frustrating. sadly, I have been unable to wade through the suggestions others have had as to how to solve the problem as i have no technical knowledge and am basically baffled by the list of suggestions. Please can anyone explain why this happens and what to do? It is fairly simple to reconnect each time but it is driving me mad having to. It generally happens when the computer is asleep but sometimes in the middle of doing something. Thanks!!!!!!

What frequency, security are you running? It would have been helpful if you specified in the first post.
Did you create a new Location in System Preferences->Network pane, Location pull-down. Create a new custom named Location. Then after you create that new Location click on the 'Apply' button to save that new custom named Location. See if that helps.
Lastly a lot of people have reported that WEP in lion is problmatic and it would be better to use WPA2 if you can.

TS3274 I pad disconnects from Internet when using it

Similar Messages

Maybe you are looking for