TS3274 I pad was working fine then started to to get a message I pad not connected to internet. Other devices are working in our home. wireless is working. Help
I pad was working fine then when tring to access safari or facebook recieved a message Safari cannot open page because your I pad is not connected to the internet. How do I correct?
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
Similar Messages
-
Verizon signal is strong but get error message "Ipad is not connected to the Internet" When I try to use Safari.
Wireless works but my Verizon account does notSome things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Since upgrading my iPhone5 to the newest iOS (6.1.2) I can longer connect to WiFi. It sees the wireless network but will not connect.. Other devices in my home that weren't upgraded can connect just fine.
I had the same problem. I did the reset networks on my iPhone & it did not work. My husband read somewhere that changing the channel on the router to manual & selecting the highest available channel number might help. I did that & it solved the problem. I have not had the problem since.
-
when I plug in my iphone5 or iPad into my Mac I get the message iTunes could not connect the service did not start properly on this device
If you are using Windows 7, go to:
Control Panel>Programs>Programs and Features
Look for a program called 'Apple Mobile Device Support'
Right-click on it
Click 'repair'
Wait until the repair operation is complete, and voila, your problem should be solved, itunes will recognise your iphone/ipod once more. This worked for me. -
When trying to sync to itunes I get a message it can not because the Apple Device Services is not started. How do I fix it?
Type "Apple Mobile Device Service" into the search bar at the top of this page by "Support" and read the resulting help articles.
-
I experience the same issues as some other posters here with the MacBook Pro, Lion, and certain networks. All other devices (Android phone, Windows laptop, iPad...) deal with the situation just fine on the same networks. The MacBook however gets its knickers in a twist:
I get perpetual "Sending request..." messages at the status bar of Google Chrome. All applications fail to find internet, despite full bars. This was only an issue since upgrading to Lion. A reboot of the Mac will always solve it, meaning it is not the router. Rebooting the router often does not solve it. Turning WiFi off then on sometimes solves it. Quitting Chrome/Safari sometimes solves it. But rebooting the Mac always solves it. This indicates it is an issue Apple really need to address.
Are there any ideas here? I have made sure there are no DNS entries. I have deleted my home network several times and re-added it. I have hard reset the router, and been through three (that's not a misprint) routers.
I doubt it is a hardware issue with the Mac as it only started with Lion, on the same Mac.Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I have recently started using iCloud on my laptop syncing it with my iPad. When the syncing process starts it stops and gives me a message something like: You do not have permission to sync this folder. Then it wants me to unlock and gives other suggestions. I have done them all and still cannot get the syncing process past this folder. I is a folder in my documents. Anyone have any solutions?
If you think this is a bug, you can report it here:
Apple - Mac OS X - Feedback -
The useless support article is https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding?s=running&as=s
See:
* [[Firefox is already running but is not responding]]
* http://kb.mozillazine.org/Profile_in_use -
Firefox has encountered and need to close, we are sorry for inconvinience, if u r middle of something, the information/data might be lost
then two tabs are located, first is send a report and second is dont send
I am getting this error twice in one minute
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; InfoPath.2; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)Bonjour
J'ai désinstallé Firefox et réinstallé de nouveau
Le problème est le même
Merci de votre aide
Jak -
Recently I upgraded Lion to 10.7.3. Since that time I have been having a lot of trouble with my internet connection. I keep losing the connect and have to go to diagnostics and turn it back on. Is anyone else having this problem?
Thanks, PatI'm afraid there are numerous threads on here discussing this problem. I posted in this one earlier that has a couple of suggestions, but the real solution will hopefully be provided in an update from Apple:
https://discussions.apple.com/message/17589686#17589686 -
My imac (2 yrs old) will not connect to my home wifi with the exception of my ISP hotspot. All other devices are fine (iphone, ipad etc). I have changed my ISP recently and this issue has never happened before. I am with my current ISP for about 7 weeks and this was not an issue for the first 2/3 weeks. Went through the usual set up procedures but alas...nothing. Message states unable to join network! Don't think it is an ISP issue as all other devices work perfect...or is it? As I said It did work at the start, but no longer. I recently moved to NJ from Ireland, so my imac is a European model (don't think that makes a difference?) I can only presume it is the settings on the imac. Any help would be greatly appreciated! Thx
Hi - out of action for a few days. To answer your questions:
- and click on Advanced and make sure everything is correct - all in order
- Also check on your router's website to make sure the iMac is recognized there - it IS NOT recognized here as other devices are
- do you by chance have your router set up to do Mac filtering? - i don't know..how do I check?
Thx -
My other iPad is only 5 months old. It was working fine but after I turned it off - now it will not turn back on.
If you are using iTunes 11 - it helps if you enable the sidebars if its not visible. From the iTunes menu at the top go to View>Show Sidebar. If iTunes does recognize the iPad, it should appear under the devices heading in the sidebar.
If it does not appear in the sidebar, you can try restoring using recovery mode. Recovery mode will totally erase the device so I hope that you have a backup that you can restore from. If you sync with iTunes, you will be able to sync all of your content back to the iPad after the backup is restored.
You can read about recovery mode here.
http://support.apple.com/kb/ht4097
Here are the Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
I am trying to download and install OSX Mavericks but everytime i input my Apple ID it keeps asking to review my account and then starts looking for credit card info, I do not have a credit card, also I thought OSX Mavericks was free, some help please.
Yes I know it's free, but Im trying to find out how to download it and install, but I keep getting account review and asked for CC details as I have no CC I can't get the download or install it, any help please, what i don't understand is why would I be asked for CC details if it is a free download ?? i just want to know is there anything I can do.
-
I messed up badly by trying to restore my brand new macbook pro by doing restart then command R and choose disc utility repair now when I start ,all I get is the white screen with a folder and a question mark,What can I do???help please
Can you still boot to the Recovery partition using Command and R whilst booting? Or did you wipe the Recovery partition as well?
If your Recovery partition is still intact, you can simply boot to it and reinstall the OS via the Internet. If you wiped the Recovery partition, you can hold down Command, option and R keys whilst booting and boot into true Internet Recovery mode. You'll be able to reformat the hard drive, erasing all partitions (format it as "Mac OS Extended (Journaled)" with a dingle GUID partition) and then reinstall the OS that shipped with your machine.
Note that you should use a physical Ethernet connection when restoring over the Internet - it's three times slower if you use wifi.
Try your Recovery partition first and if that doesn't work, use Internet Recovery.
Clinton -
when I start firefox, i get this message ( The instruction at "0x7b9c77a9" referenced memory at "0x7b9c77a9". The memory could not be "read" ) hs anyone any idea why? I have scanned with AVG and something simply called 'Trojan Remover' and they both find nothing.... any advice would be greatly welcomed.. thanks
== This happened ==
Every time Firefox opened
== this morning 22/07/10Lyall,
I have seen this before, a long time ago (several years), and I cannot
remember how/if we resolved it.
If this is an impotant issue to you, I suggest that you open a case with
BEA support.
Regards,
Peter.
Got a Question? Ask BEA at http://askbea.bea.com
The views expressed in this posting are solely those of the author, and BEA
Systems, Inc. does not endorse any of these views.
BEA Systems, Inc. is not responsible for the accuracy or completeness of
the
information provided
and assumes no duty to correct, expand upon, delete or update any of the
information contained in this posting.
Lyall Pearce wrote:
The title says it all really.
I see other posts getting replies.
This is a rather important issue, I have seen another post with a similar problem.
While not being a show-stopper it certainly raises concerns.
The application works ok until the application exits (in both development and
executable form)
Apparently this did not happen with Tux 7.1
It does with 8, I do not have 7.1 so I have no workaround.
..Lyall
Maybe you are looking for
-
Key Figure in a Input Ready Query
I have 9 key figures in my input ready query. 5 of them are not input ready and being loaded through a job and 4 are input ready. There is a problem with one key figure, I am able to see data for the key figure when i have START QUERY IN THE CHANGE M
-
Can't open itunes or install or uninstall any apple programs, says error 2203
Hi itunes will not open on my PC, i have tried many oprtion that others have suggested but none work. I cannot install or reinstall as it keeps coming up with the error message 2203
-
Best way to (re)install Mountain Lion fresh on a new ssd
Hi, I've been running Mountain Lion on my 2010 Mac Pro 3.2ghz but it's got incredibly slow with only 120 GB on a 1 TB HDD.. I've used every utility to try to clean my old drive and speed things up (DiskWarrior, defragmentation, etc) without much hel
-
To get Current Business Partner number In BADi
Hi All, In Tcode BP (for creating Business Partner) i am using BADi 'BUPA_GENERAL_UPDATE'. In this i want get Current Business partner No Assigned for the current Creation process.Suggest me how to get Current Businees Partner no assigned or current
-
Cannot export a panel into adobe cs5 plugin/panels
this is the error message I reecive after creating and saving the panel in my documents folder can not export the panel to the cs5 plugins\panels