TS3274 I restored my IPad and lost pictures and all info-how do I undo?
I restored my IPad and lost my pictures and all info for email ect..How do I undo and go back ?
A restore erases everything from your device, if you didn't back them up to your computer or backup your iPad then they are gone.
Similar Messages
-
I restored my iPad and all my pictures and videos are gone how do I get them back?
I restored my iPad and all my pictures and videos are gone how do I get them back?
Well, when you restore your ipad, there is really no way to get the information back. The reason you restore it i to get all of the information off of it. Why did you restore it if you wanted to keep the info?
Aa far as I know, there is no way to un-restore any device. But, you can put the info back onto the device if it was on your computer, etc.
Sorry... -
I recently restore my iPad,I lost my apps and some of my pictures.Can I reverse it to have my staf back?
Connect the iPad to your computer's iTunes and right-click the iPad 'device' on the left-hand side of iTunes and select 'Restore From Backup' from the pop-up : backups and restoring.
You will need to restore the complete backup to the iPad, you can't just restore photos. -
I had to restore my IPad and lost all my pics and videos. Is there any way I can get them back?? They were all of my baby walking and his first words. Please help!!!
1. iTune Backup?
2. iCloud Backup?
3. PhotoStream?
4. My Picture in your PC?
5. Backup on Thumbdrive? -
i accidently restored my ipad and lost all my information.
nope, not unless you have the data backed up in iCloud or on a computer.
-
Nothing was deleted. We opened up the app and they were all gone. HELP!! I have restored the ipad and they are still not back!
Are the files in www.icloud.com (use your computer to check).
-
I have an IPad with a Restriction code that we cannot remember. Is it possible to delete and restore the IPad without the code. If not how do I figure out the code or how to remove it?
The only option is to wipe the device clean and restore it to factory settings. Hope you have a backup.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
Cheers, Tom -
HT201412 I have tried to restore my ipad and it cant be found in itunes
I have tried to restore my ipad and it cant be found in itunes
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
I restored my iPad and then i clicked "Restore iTunes backup". It is finished but on the iPad screen it says connect to iTunes. I connected it to iTunes but it says the same thing. What should I do?
You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port. (Make sure you have the latest version of iTune on your computer)
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
Can someone help me. I am using an iPad mini with iOS 7.0.4 with wifi connection. Have had no problems until recently when I was unable to update apps and then noticed that some apps would open but no data would be available in apps like intelicast and Pinterest. I have restored the iPad and now I am unable to download any of my previously purchased apps.
1. Make sure iPad is using the latest software
2. Settings>General>Date and Time>Set Automatically>On
3. Make sure Time Zone is correct
4. Reset iPad. Hold the Sleep and Home button down until you see the Apple Logo. -
i bought a second hand ipad 4 4g the first user forgot the apple id and password, how can i restore the ipad and create a new id and password for it?
You cannot get around Activation Lock without the oringinal owner disassociating the iPad from their account.
See the Activation Lock FAQ for what you and they need to know. -
I updated to the most recent version of itunes before restoring my ipad- and now I cant find the "restore" feature! Anyone know where it went?
It is in the same place as it always was.
Ctrl B to show the top menu
View > Show Sidebar
Your device should be in the left hand panel
Select your device the restore functionality is on the summary page on the right as usual -
I just restored my ipad and now when I connect it, I get a message that says itunes dected an ipad but doesn't recongnise it. it then tells me to unplug the ipad and plug it in again.l I do that and get the same message.
have you tried a different usb port? for the **** of it try restarting the computer as well
-
I am unable to restore my Ipad and get error 14. Help
I am told I need to restore my iPad and when I try I get an error message 14 unknown error and the task won't complete. Can any one help?
http://support.apple.com/kb/TS3694#error14
-
I was taking pictures on my iPad and all of a sudden these single white horizonital and vertical lines appeared on my photo off center connected to a little white box. How did they get there and how do I get rid of them.
Thanks,
landscape designerSounds like you have the Grid turned on. Tap Options and turn off Grid.
The grid is used to assist in composing a photo using "the rule of thirds". Rather than centering your subject line the subject up on a line or intersection of the line for a more pleasing photo. Landscape photos can also look better by aligning the horizon with one of the horizontal lines
Maybe you are looking for
-
Sending Date parameter from the form to Report
Dear Friend Hi everybody, I am sending the date parameter to my report through a form ,and my date format in the form and in the report as follow : DD/MM/YYYY but when I enter the date as 18/1/2004 the system pass this value as follow : 18-JAN-04 but
-
Issue during clearing for vendors
Hi All, When making the clearing for vendors, am getting the below error message:- "Net document types are not allowed when clearing". Whereas I have not given any document type while clearing. What to do? Regds, Bhavesh
-
HT1766 Where do I find the Devices tab in itunes to back up my i-phone?
I just go the i-phone 5s and want to transfer my data and apps from my old iphone. I can't find the device tab in itunes to download my old phone so I can transfer the date to my new one. thanks.
-
pls help me to get the scenario below There is group condition wich will be triggered in sales order and applied across all materials, when there is partial delivery , group condition needs to be triggered in biling document in accordance with qty de
-
How can I programmatically change the number displayed on a digital control?
In my application, there are two while loops. The inner loop has a digital control where the user can enter a number. If he enters an invalid number, I want to clear his input.