TS3274 ipad camera to projector not showing image.

I have my ipad hooked up to a projector so the cameral on the ipad will focus in on item and project it, it first showed and then when I tried to reconnect the ipad isn't passing the image to the projector to display on the wall

Thanks for responding.  I have ipad first generation.  When i open photo app it goes to photo screen and shows all my photos in thumbnail view.  At the top of screen I only have three choices,  photos, albums, events.  switching from photos to albums shows album titled last import and a album titled All Imports.  Opening either shows all the same photos as in the opening screen.
I took some pictures on my camera and imported them thru the camere connection kit.  Still same result.  When I open photo app it goes to photo screen and show orginal photos + the new photos in thumbnail view only.  My new ipod with ios 5 pre installed show a camera roll.
Seems like upgrading may have left out some files???
I've tried resetting, looking in iexplorer, etc. 

Similar Messages

  • HT4101 Once pictures are moved from your camera to your iPad (using the camera connection kit), how do you get the photos off of the iPad? They do not show up in my photo stream or my iCloud.

    Once pictures are moved from your camera to your iPad (using the camera connection kit), how do you get the photos off of the iPad? They do not show up in my photo stream or my iCloud. I am able to see any photo I took on the iPad using the iPad camera (in iTunes, photo stream, or when I open windows explorer and browse the iPad director), however I cannot see any photos transfered from my camera to the iPad. The camera connection kit must have put my photos in a directory I cannot get to and cannot sync.

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • Mail does not show images anymore server stopped responding on my iPad 2 when attempting to browse web

    Over the last couple of days my ipad 2 has started to play up. First the mail would not show images in mail then when trying to browse the web it now will not open any pages. I have attempted a wipe & reload but still no difference.

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

  • Changes I make in camera raw do not show up or update in bridge.

    Greetings.
    I’m working in PS CS4 in XP(government).
    Changes I make in camera raw do not show up or update in bridge.
    These images DO process with the changes when I run my actions.
    For example: Open images in bridge. Edit. Open reaming images in camera raw. Push the images two stops in camera raw. Close camera raw. Images in bridge show no change. Run action to turn raw files into psd. Final PSD appear pushed two stops.
    Purging Cache make no difference.
    Thoughts?

    You are using Embedded thumbnails.  These are small and fast, but do not show raw edits.
    You need to use one of the HQ thumb options to see the edits.

  • Camera attributes do not show (sometimes​)

    I am aiming to configure a webcam (Trus Exis) so that the camera attributes can be configured in labview. This followed in a program (see attatched), however it sometimes does not work (camera attributes return empty and cannot be written). I am not totally sure of the problem as it appears quiet random, however after playing around a bit it appeared that it works better if I quickly stop and then start the vi again. To test this I placed the vi in a while loop and added a wait function. If this wait is 10ms the defect disappears, at 1sec it works about half the iterations, and at 10sec it occasionally works.
    One thing I also noticed is that in IMAQdx Configure Grab VI the check if session in exists always returns true (so path isn't found) and the standard path (cam0) is sent. Now however, this is the same path that is inputted. So I suspect this might be a couse of the problem too.
    Anyone have any ideas on how to solve this? Help is greatly appriciated.
    Attachments:
    test01.vi ‏58 KB

    Hello ThiCop,
    Thanks for your reaction, in The max it is showing that the camera connection is DirectShow. I have rebooted my pc so I could give you a clean MAX report (plugged in webcam after windows booted). This is the ni_support.zip. Here all camera Attributes show and can be edited at will (I think this is the sometimes that my program does work). Then I closed the MAX and reopened it (you could see it check for the webcam again and it was found again) this is the second report, here the camera attributes do not show.
    I tried opening your reccomended vi to test it but as I have labview 9.0 (student edition) I was unable to open it. I have however used the NI examble Grab and basic attributes.vi and here it worked after rebooting the pc. Stopping and restarting the program makes the vi stop being able to edit the attributes (still getting image though). As said before I suspect it might have something to do with time between starting and stopping the VI. If I place a grab and read attribute configuration in a while loop (so that the camera is configured and stopped multiple times) it appears that with a short wait (so a short time betueen the stopping and restarting) it works more often then with a long wait. Here the long wait still shows a immage if the attributes are not shown.
    Although it might seem like a strange problem I hope you can help me further. Just ask for more info if I have not suppied enough.
    Thanks in advance
    Attachments:
    ni_support.zip ‏371 KB
    ni_support2.zip ‏370 KB

  • I am trying to transfer my movies (mp4 files) to my IPad, but they are not showing up on the IPad. I have 13 movies showing on my IPad that they are in ICloud. I've sync'd the movies I want to the IPad, but only one is showing under the "movies" folder. ?

    I have been trying to transfer some different movies from my PC to my IPad, but they are not showing in the "movie" folder. I have sync'd the movies (these are mp4 files) that I wanted transfered, but only one is showing in the folder. There are 13 other movies in the folder that have the ICloud symbol in the corner of their picture. I understand that I can pull those movies from ICloud any time I want to watch them, but I want to watch the ones that I've just sync'd with my IPad. How do I find them? After I checked the movies I wanted, I "applied" them and watched it sync and copy the wanted movies to my IPad. Now what?  Thanks.

    There are some good programs that you could use to convert the format, Handbrake or Mpegstreamclip are two good free ones. Convert them to MP4 and then try importing them again.

  • I downloaded a movie from my iPad  and it is not showing up on my iPad

    I downloaded a movie from my iPad  and it is not showing up on my iPado

    You downloaded a movie from your iPad but it is not showing up on your iPad????
    Did you look in the videos app for the movie?

  • My mac will not show images when on the internet?

    My mac will not show images when on the internet?  I think I have inadvertently changed some settings but nor sure which one.

    I am going to assume you are using Safari here. If so then go to the Apple menu bar and hit Safari-> Preferences.  Under the Apperance tab there is a check box that is called "Display images when the page opens".  Check if that is unticked.

  • I just rented a video on my iPad, but it's not showing up under rented videos. Where do I go?

    I just rented a video on my iPad and it's not showing up under rented videos. I have rented videos before. But don't know what to do. Help.

    It should be in the Videos app
    If not, are your age restrictions set up in the Settings >> General >> .......?
    If your restrictions are turned on and you rented a PG18 rated movie or something, it won't show by design.

  • Camera new d810 not showing pix up in raw files in elements 11

    camera new d810 not showing pix up in raw files in elements 11 and lightroom 4

    DNGC 8.7 can be found, here:  http://www.adobe.com/downloads/updates/
    You can purchase upgrades to LR and/or PSE, here:
    http://www.adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_software _sl_mostpopular.html

  • I have got an ipad 2 .It is not showing any home screen but showing a symbol of connecting USB with itunes.I have downloaded itunes on my pc and it shows sync with ipad.How di I get my home screen.Pl help

    I have got an ipad 2 .It is not showing any home screen but showing a symbol of connecting USB with itunes.I have downloaded itunes on my pc and it shows sync with ipad.How di I get my home screen.Pl help

    Follow the prompts for setting up your iPad with iTunes on your PC.
    Which Windoze version is your PC running?

  • My camera button is not showing up in my Locked Screen on my iPhone 4 but will show up when I get a notification.

    My camera button is not showing up in my Locked Screen on my iPhone 4 but will show up when I get a notification.

    Double Click home button, then tap the camera icon next to the slide to unlock.

  • Jdeveloper visual editor do not show images and other component shapes

    I used jdeveloper(10.1.3.3.0) to create an ADF BC application, I create a jsf jsp file and drag and drop components from ADF Faces Core to this file visual editor, but jdeveloper visual editor do not show images and other component shapes.
    Could you tell me how I can fix this problem?
    Thanks,
    Mike

    Actually, I need to make a dummy change to the jsp file and then it will display boxes representing the objects in the visual editor whereas I get an exception in the log:
    javax.servlet.jsp.JspException: Cannot find FacesContext
    This does not talk much to me !
    Thanks

  • Hi, i am having a problem in my ipad 2 , it is not showing main screen just showing a black blank screen in which downloading icon is only shwn which is continously and when i connect to itunes via windows 7 it showing this error (0xE8000065) can any one

    hi, i am having a problem in my ipad 2 , it is not showing main screen just showing a black blank screen in which downloading icon is only shwn which is continously and when i connect to itunes via windows 7 it showing this error (0xE8000065) can any one

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • Mobile Safari not showing images

    Hi there,
    Since upgrading to 4.01 and then 4.02 on my iPhone, Safari seems to intermittently not show images on websites... does anyone know the reason for this and a solution?

    I am having the same issue. I have found in my case the site I was working on is pulling content from JSON and the mobile app is using a Cache Manifest file. When I removed the manifest file reference I could see the images again.
    Message was edited by: Adam Randlett

Maybe you are looking for