TS3274 ipad keeps flashing apple logo

Help!  trying to recharge ipad 1
apple logo keeps flashing on/off and beeping
unable to sync on desktop as the ipad keeps turning itself off
any suggestions?  Many thanks

Try This  >  http://support.apple.com/kb/HT1808
You may need to try this More than Once...
If no joy...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is suggested...
Be sure to make an appointment first...

Similar Messages

  • Phone Keeps FLASHING Apple LOGO and wont work with a power source.

    When I was doing the update something happened on my iphone 4 and now the phone wont properly turn in and keeps flashing the apple logo (also it wont even charge in a power source). What should I do?

    I think what you are describing is what happened to my iPhone. I was updating my software then after it was 'done' it just started flashing the apple logo every 5 secs. What I did was I connected my iPhone to my computer via USB then I pressed and held both the top and the home button for about 15 secs then released the top button while continuing to hold the home button. Then I followed these instructions: http://support.apple.com/kb/HT1808
    Then, in my case it said that it could not restore my iPhone. If that happens to you, too, I suggest you follow these steps: http://support.apple.com/kb/TS1275
    I hope it works for you, too.

  • My ipad mini is showing an flashing apple logo

    My ipad mini is showing an flashing apple logo.i have tried resetting (off button and home button), but when it turns back on, its the same problem., i have also tried a hard reset twice, but it wont continue until i put the passcode into ipad.any help really appreciated.

    Hi patriciabognorregis,
    Thank you for using Apple Support Communities.
    To help resolve this issue where your iPad will not boot past the Apple logo, I'd like you to please follow the troubleshooting steps in the article linked to below.
    iOS: Not responding or does not turn on - Apple Support
    Take care,
    Alex H.

  • Why does my ipad keep flashing the apple symbol and battery symbol

    why does my my ipad keep flashing the apple symbol?

    Have you tried charging it using the power adapter & cable that came with the device?

  • Flashing Apple logo - does not come on and cannot power it down

    My husband has original iPhone from Dec '07. For some reason, while using it, his volume went low and he could not raise it. He tried powering it down to reset it but screen went black and then apple logo came on, then went black, then came on, flashing like that for several minutes before going black. He brought it home, i tried holding the sleep/wake button, but same result - flashing apple logos for few minutes, then black. Tried holding home button but also same result. Plugged into computer - it came on but the "Sync in Progress, do not disconnect" did not come on and phone did not register on desktop even though iTunes showed it. Anyways, did a complete restore with most recent software but again, we're still having the same problem. Phone works when plugged into computer, but not in the way it should and once you unplug it from the computer, sleep/wake button does nothing and cannot power it down. After restoring it, i again tried to power down holding sleep/wake button, but got flashing apple logos again. Any suggestions? Do we need to just take this in and have it looked at?

    Have you tried booting it to recovery? If you haven't, try these steps:
    1) Close iTunes and unplug and power down your iPhone
    2) Press and hold the home button
    3) Keeping the home button held down, plug your iPhone into your computer
    5) Keep the button held down until a recovery screen with a pic of a USB cable with an arrow pointing to an iTunes icon shows.
    6) Open iTunes and perform a restore
    If this doesn't solve your problem, you have to go to an Apple store and get it exchanged, as the above post said.
    Message was edited by: eaglesflight1258

  • Iphone flashing apple logo screen!

    Hi my iphone 5 is stuck on a flashing apple logo sceen. I put my iphone into the charger and the phone turns on but the apple logo keeps on flashing every 5 seconds and it will not go into the proper main menu. My power button is broken so the only way to turn on the phone is by putting it into the charger and once its charged the phone turns on automatically, so i can't enter dfu mode etc
    I found a similar problem on youtube to show you https://www.youtube.com/watch?v=w3O0iBLGiyU
    Anyone know how i could fix this? i have tried some methods that i found online but none worked so far..

    If you connect it to your computer, does iTunes see it?
    If not, without a working power button, there is no further troubleshooting you can do. You will need to bring it to an Apple Store and have them take a look.
    There is a known issue with some iPhone 5 model's power/sleep/wake button, and you'll want to go here to see if you're eligible: https://www.apple.com/support/iphone5-sleepwakebutton/ .
    Not a guarantee that you'll get your phone working again but certainly won't hurt to check!
    ~Lyssa

  • When I power up my ipad air the apple logo comes up like it should then the lock screen only comes up for a second or less so I can't swipe it fast enough.

    When I power up my iPad Air the Apple Logo comes up like it should then the lock screen only comes up for a second or less so I can't swipe it fast enough to get to the home page. The lock screen just disappears. I have to hit the sleep/wake or home button to bring the lock screen back up so I can swipe it. Have others found this situation with the iPad Air. I have an iPad 2 and it does not happen at all. The Apple store checked it out. One rep said to me this is unusual and had a tech check it out and they said this is normal. If the iPad is suppose to be user friendly, why this extra step to get to the lock screen? Are other owners of the iPad Air having the same problem? If so, what have you done to correct it?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
     Cheers, Tom

  • HT4060 Cannot get iPad 2 charged beyond 1%.  All charging ports tried: AC adapter(s), USB 2 port on MacBook Pro. ITunes shows iPad only for a few seconds. iPad displays alternately: Apple logo, battery w/slim red band, then battery w/1% charged informatio

    Cannot get iPad 2 charged beyond 1%.  All charging ports tried: AC adapter(s), USB 2 port on MacBook Pro. ITunes shows iPad only for a few seconds. iPad displays alternately: Apple logo, battery w/slim red band, then battery w/1% charged information. How can I get it to charge beyond 1% so I can proceed to troubleshoot?

    I have had your exact problem with my old 3GS, now I cannot even get it to turn on, I still see that it is supposed to be charging though, but it never charges any so it seems.
    I replaced the Lower Dock Connector Assembly back when it still charged while hooked to my PC, and it found it made no real difference.
    http://www.amazon.com/gp/product/B003Y5YXLK/ref=oh_details_o05_s00_i00?ie=UTF8&p sc=1 
    At this point I am not sure if I should replace the battery and hope for the best, or just junk the phone, I cannot really sell it if I cannot reset it...

  • My iPhone 4 won't turn on unless I plug it in to a charger it says the battery is 100% and that I need to conect to iTunes when I plug it in to my computer it just comes up with a flashing apple logo :(

    My iPhone 4 won't turn on unless I plug it in to a charger it says the battery is 100% and that I need to conect to iTunes when I plug it in to my computer it just comes up with a flashing apple logo :(

    The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
    You're on your own.  Good luck.

  • My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

    My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • Iphone 4 unresponsive and flashes apple logo but itunes wont recognise it . when plugged into the mains it turns onto recovery mode and asks to be plugged into itunes, when i unplug it from the mains it turns straight off again

    please help! my iphone randomly went unresponsive, when plugged into itunes it flashes apple logo and itunes doesnt recognise it and when plugged into the mains its in recovery mode, asks to be connected to itunes, but immediately turns off when unplugged from mains

    You could try to do a hard reset, sometimes resetting the phone helps. Hold down the sleep/wake button on the top and the home button until you see the apple logo, this make take a minute or two but this might help.

  • How do i get my Iphone 5 to turn back on from the flashing apple logo?

    I kist [icked it up and the screen was black so i put it on the charger and now its a flashing apple logo and i cannot get it to do anything else.

    Hello, lwilson20. 
    I would recommend processing the steps in the article below. 
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Regards,
    Jason H. 

  • HT1296 iPad stuck on Apple logo after trying to reset, how do I fix

    iPad stuck on Apple logo after resetting how do I fix?

    Hi..
    Follow the instructions here >  Apple - Support - iPad - iPad Troubleshooting Assistant

  • My ipad kept showing apple logo n no red slide in appears

    My Ipad kept showing apple logo and no red slide appears.
    Pls help.

    Unable to Update or Restore
    http://support.apple.com/kb/ht4097

  • IPad cycling between Apple logo and Grinding icon endlessly

    I was tooling along using my iPad when a notice for updating to IOS 8.02 came up. Then without touching any buttons my iPad started rebooting.  I am cycling between the Apple logo and the working or grinding icon grinding then freezing.  I cannot turn the iPad off and the battery is almost totally depleted.  I tried to charge the battery overnight, but it is not charging.  Any solutions?  I went to iTunes to back up.  When the Apple logo is showing iTunes says it cannot back up because the iPad is locked.  it only recognizes the iPad when the Apple logo is showing

    If you can't get in any other way, you can try restoring using recovery mode first. If that won't work, maybe you can erase it and start over using find my iPhone.
    If you can't update or restore your iPhone, iPad, or iPod touch
    iCloud: Erase your device

Maybe you are looking for

  • Insert statements in jsp

    I am having a problem. I would like to insert some form data into a database using jsp but I have coded it and it gives me an error insert statement syntax is incorrect here is my code <%@page import="java.sql.*"%> <html> <head> <title> </title> </he

  • To add the multiline data into an internal table from TextEdit

    Hello Experts, I have one requirement that I have to use the TextEdit field. and put the values into an internal table. can you help me. with some sample code. Thanks in Advance Kuldeep

  • Premiere Pro CC Crash on new MacPro and will not reopen.

    Crashed while running warp stablizer, when i tried to reopen it it said Adobe Premiere Quit Unexpectedly, so i sent the error report and hit reopen, and the premier pro title screen comes up for a split second than it goes back to the exact same erro

  • Update with exists and subquery

    Hi how to pass index to this sql Table pap ( eqid,seq,histseq,docno,status,value1,value2) PK(eqid,seq,histseq) and indx (docno) table pa ( eqid,seq,docno,status,value1,value2) PK(eqid,seq) and indx (docno) update pa set (value1,value2) = (select pap.

  • "Creativity_E": LR/PS integration problem solved!

    After waiting for more than an hour on hold for Adobe tech support, I gave up and managed to resolve the problem myself. Since I found several other reports of the same problem online with  no solution, I decided to share mine: SYMPTOM: Lightroom 2 f