TS3274 ipad with white screen only after startup
Just downloaded/installed the latest ios for my iPad and will turn on but stop at a "white scren". It is "stuck" at a white screen with no other functionality ???
Tom-
Try resetting (rebooting) your iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow if it appears. The iPad will restart after a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
Fred
Similar Messages
-
Just for the future on the ipad air there seems to be a white screen glitch after a certain amount of use. This needs to be fixed thanks
You are not talking to Apple here. We are all users trying to help one another solve issues with their iPads.
I have an iPad Air and have never experienced something that I would call a " white screen glitch."
Please explain exactly what is happening on your iPad, what you might have tried to fix it and what, if any, error messages you receive. -
TS1702 only coming up with white screen
my ipod touch 2nd generation 32gb only coming up with white screen. i could hear the click that we hear when the ipod or iphone makes when it get started. then the white screen goes off.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
HT201210 I updated my ipad 1 to 5.1.1 and after that, my ipad shows black screen only, no more
I updated my ipad 1 to 5.1.1 and after that, my ipad shows black screen only, no more screens, what can i do to fix it,a already tried to recover several times, on three different computers nothing happens
1. Turn off iPad
2. Connect USB cable to computer
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times. -
Apple Hardware Test Stuck with white screen
hy every one..............
i am unable to start the apple hardware test ,i've done anything ,holding d at start up with inserted installation disk,also with holding c........
also inserted application cd....
apple logo appear and after some time with spinning wheel it stuck with white screen....What that means
please help me out....
what can i do???If you are still using Snow Leopard -
Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer. Now reboot.
If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again. If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up. At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver.
If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode.
If the Mac starts up correctly, restart without pressing the "shift" key.
If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
(If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Remove any 3rd party ram.
Reinstall Snow Leopard - This will install a "fresh" copy of Snow Leopard without archiving old system files but leaves the rest of your files in place.
If your computer is still under warranty or you have Apple Care, take full advantage of it by letting tech support deal with your problems. It's what you're paying them for.
Out of warranty - take the computer to an Apple store or an AASP. Whichever is more convenient for you. -
Appletv: downloaded but white screen only
Ive never had a problem renting films via appletv. I am trying to play two films,one completed download and one downloading in process. When I try to start film...white screen only.
The itunes store has no problem communicating on network as I can watch trailers,and stream content from my machines in network. But no love on playing my films!
Help.Apple TV - HD Movie Rental - White Screen:
Short Answer -
Unplugging the Apple TV and then plugging it back in solved the problem.
Long Answer -
Shortly after the HD movie I rented began downloading, I received the prompt that I could begin watching the movie, so I pressed play. All I saw was a white screen. I then waited until the movie was 100% downloaded and tried again. Same result. I deleted the rental and then re-rented it, which resulted in a second download and the same white screen as before. In between the two downloads, I tried watching some HD movie trailers and experienced no difficulties. I also tried the communication dis-association thing but that was not successful either. I finally unplugged the Apple TV power cord, let it power down, then plugged it back in. The HD movie played with no further problems.
It looks like PC users get the "blue screen of death" and Apple TV users get a white one. -
Hi, my Macbook doesn't turn on, it just show a white screen and after a while a big question mark blinks but nothing else, cannot click the question mark, cannot do anything.Also it makes a funny noise. Any suggestions?
Suppose it's a HDD crash. Boot from Install DVD which came with your MacBook(Press C during startup) and open DiskUtility to repair your HDD if it's able to mount.
-
Computer pauses on startuo with white screen
Why is computer pausing on startup with white screen?
It pauses on the white screen for how long, does it finally go through?
Hold the Shift key down while booting,
run through this list and do #1 - #7
If you get into the machine, then do #9 - #13
Step by Step to fix your Mac -
My iPod has a white screen. After holding down the middle and menu button, the screen goes black then back to white and beeps twice. I have returned to original settings and resorted content to no avail. I still have a white screen. I have plugged it up and tried resetting again and again, still a white screen with two beeps - help.
I have the same exact issue. Fifth generation iPod Nano, blank screen, Restore had no effect. I'm running Windows 7 Home, with all software up-to-date. I suspect hardware damage. Any clarification would be appreciated. Thank you in advance.
-
HT201274 how to restore a iphone with white screen
how i can restore my iphone 3gs with white screen to see if it's can resolve the problem
Plug the device into a computer with iTunes and restore it.
-
Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.
Try to reset the PRAM first then go from there.
http://support.apple.com/kb/HT1379 -
I switch on my iPod,apple logo comes and a white screen comes after the apple logo and it restarts again
Try here:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Frozen and unresponsive
You may have to let the battery fully drain and then charge and try again.. -
Sorry for my bad english. My ipod have a white screen and after few secondes somes lines appear
Sorry for my bad english. My ipod have a white screen and after few secondes somes lines appear.
- Try a reet:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next connect to computer and if it shows in iTunes restore the iPod.
- If the screen is still white, let the battery fully drain and charge for an hour.
- If still white screen it is time for an appointment at the Genius Bar of an Apple store.
- If not, the try the reset and connect to iTunes and restore. Also try placing the iPod in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
i restored my ipod touch because it had a white screen but after i restored it the screen was still white what should i do?
Sounds like a hardware issue. Make an appointment at an Apple Store.
-
APP store indicates 1 update. Press "store", "loading" briefly on screen then white screen with updates bar on top. Press updates button in lower right; nothing happens frozen with white screen and still indication 1 update. Other store features and ipod work ok
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iTunes and App Stores and sign ut and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Also see:
https://discussions.apple.com/thread/4751197?tstart=0
Maybe you are looking for
-
Windows 7 brightness reverts back, wifi takes long to reconnect after sleep
Hi fellow members, My brightness setting keeps reverting to max. I have tried setting via power manager and also from control panel.I can adjust but when the computer restarts, the brightnes reverts to max. It started happeing around a month ago. I d
-
Compressor 3.5 Watermark Rendering Bad
Hi All, Just upgraded to Final Cut Studio 3 (Compressor 3.5) and when I render Watermarks that looked fine in Compressor 3, they are now almost totally 'washed out' or faded. Specifically, the watermarks were made in Photoshop (PSD) and the Opacity w
-
How to modify and compile SDK 4 frameworks file in Flash Builder 4
Hi, I would like to modify \Program Files\Adobe\Adobe Flash Builder 4\sdks\4.0.0\frameworks\projects\framework\src\mx\core\ScrollControlBase.as file for testing of my application. How do I get FlashBuilder 4 to compile that file and include it into m
-
Hi This is a newbie sort of question, so thank you for your patience. I barely use vector images. But I need to draw an entire graphic in vector so I have drawn it using the pen. My question is if I save the path (.ai) file when I open it in Illustra
-
CS4 wont open, product licensing expired
I installed AI CS4 as a trial to see if I should buy it. When I try to open it up, a little popup comes up and says "Liscencing for this product has expired.". It wont even open to the main window where I would be able to enter my serial code. I trie