TS3274 IPAD wont activate after resetting to startup screen

A couple of nights ago, my iPad3 reset itself to the signing screen - and starting cycling through the activation process. I can't get it to activate now...and itunes won't complete activation when hooked up by USB - any suggestions?

Try resetting your iPad.
Do you have an iPad Wi-Fi + 3G? Make sure it has access to the Internet through your computer, a Wi-Fi or cellular data network.
This might help ya out too -> iOS: Resolving activation messages

Similar Messages

My ipad wont activate just got it new

My new ipad wont activate, geting error code 0x80090318
tells me the serial No can not be found in records,
My iphone works on my itune my ipad works on it but this thing wont activate,

Look at this link http://support.apple.com/kb/TS3221
 Cheers, Tom

HT4623 what do u do if your iphone wont activate after u update it

what do u do if your iphone wont activate after u update it

You contact the carrier it's locked to and see if they will unlock it for you. Activation problems are almost always due to the fact that the phone was hacked to unlock it instead of being legitimately unlocked.
Of course, this can also happen if you're trying to activate it without a SIM in it. You can not activate the phone without a SIM.

3gs wont activate after latest update

My Iphone wont activate after the latest update was installed, even when connected to Itunes it just say disconnect and install sim card, even though there is a working sim in the phone, any help would be gratfull.

"We're Sorry, Activation Server Temporarily Unavailable, contact Customer Care...Your request Could Not Be Completed?"
99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
So, you need to get a sim card from the carrier the phone was originally locked to, or get it officially unlocked, if you want to activate it. Because it appears that it was not officially unlocked.

Re-activate after resetting Ipad 1

Hi,
My Ipad 1 was running slowing few weeks ago, so i did reset it. After resetting process, it's unable to re-activate.
Here is the IMEI
It's bought in Taiwan or Hongkong by my company La Veranda Resort in Phu Quoc, Vietnam.
Please advise me what to do!
Tuan (Mr.)
<Edited by Host>

iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
 Cheers, Tom

I NEED HELP!! my iphone 5s wont activate after updating to ios 8 . what is wrong?

hello! I updated to ios 8 two days ago and it was ok. I started using my iphone later that day and it just rebooted . Now it wont activate .

look... I start my iphone and and it goes to main LOCK screen where a message is shown, the message is "activation needed" . After I slide to unlock and write my security code it goes directly to the activation page , not to the very begging ,where you should select the lenguage but from the part where you have to chose a wifi connection . I connect to wifi and the activation process starts . On the screen is a message that tells me to wait a couple of minutes . After a couple of minutes there is another message shown on the screen where it tells me that the activation server is unreachable for the moment , please try again later . and this procedure can be repeated a hundred times and the same message will appear . It wont eaven reset . Any ideas wat is rong with it

TS3274 ipad wont power on

my ipad wont reset. Help.

Try this ...
Turn the iPad Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the iPad On...
More Info Here > http://support.apple.com/kb/TS3281

PC wont reboot after reset untill power removed

Hi
My PC wont reboot after a "restart" from windows or pushing the "reset" button untill i unplug the power supply from the mains. Then it restarts without fault.
If i dont unplug it the monitor remains blank, the hard drives spin etc but no action.
PC SPEC
K7N2G ilsr
bios v 1.2
amd 2400
512mb 333ddr ram
128 assigned to VGA (onboard)
windows XP PRO
300W psu
ALL Brand new
Thanks
ste

i would replace the power supply get new one higher wattage wont hurt

TS3274 ipad wont slide to unlock

ipad wont slide open it is showing time and date also a box with cannot back up i clould could some one advice me just new to this thanks

Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Iphone 5s wont activate after resseting

helpp
i resetted my phone because i forgotten my code. now it wont activate, he cant find my wifi network and with itunes it also doesnt work because my sim is locked
what do i have to do to unlock my simcard? so i can use my phone again

Hello essieswijk,
Thanks for using Apple Support Communities.
From your post I understand that you have restored your iPhone due to forgetting the passcode, and now you are presented with an error that the SIM is locked. To help resolve this issue please follow the directions in the link below.
iOS: Understanding the SIM PIN - Apple Support
Have a great weekend,
Alex H.

Ipad wont connect or reset

My ipad wont connect to my mac, so i tought i moght be a good idea to reset to factory settings.. but when i do that, is just keep showing loading screen for hours... help me!?

Your reset to factory settings was not a good choice. In your circumstances I WOULD HAVE recommended -
Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1591
HOWEVER, in your present circumstances I hope you have a backup and I suggest you go down the route of putting your iPad into recovery mode and doing a Restore from your latest backup. See here for the guidance -http://support.apple.com/kb/HT1808 and note the Additional Information at the end.

TS2811 my iphone wont activate after restoring it

i bought an iphone 3g off a friend of mine and i signed up for itunes and i restored the phone but now it wont activate itself. What should i do?

Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
If your iPhone has not been jailbroken, see the troubleshooting suggestions here:
http://support.apple.com/kb/TS3424?viewlocale=en_US

My iphone 3gs wont activate after updating to ios 5

ive updated my iphone 3gs to ios 5 but now itunes wont activate my phone and comes up with a messege saying my phone has no sim inserted when it has one (original orange UK sim), what can i do to sort this out

I had the same problem with mine and found out because i bought it second hand and had it unlocked updating it causes it to go back to being locked again. If you've bought it in the same situation then maybe that's the problem, i got it unlocked really cheap too and now its back to normal and all my messges, apps and pics are back.
hope this helps

Satellite A210 - Screen turs off after the Windows startup screen

when I boot my windows there is the startup screen. After this my screen turns off and can't login to windows.
Satellite A210
ATI Mobility Radeon HD2600
Where can I get some old drivers for the ATI Mobility Radeon HD2600, which I can install without starting windows?

> Where can I get some old drivers for the ATI Mobility Radeon HD2600, which I can install without starting windows?
Please dont understand me wrong but I think you are on the wrong way.
Device drivers (graphic card, LAN, etc.) have to be installed within running system (i.e: Windows OS, etc)
Im sure; driver isnt the problem if nothing is visible on the screen.
First of all I would recommend you to connect the notebook to an external screen/monitor just to check if something would be visible on the 2nd display.
But just one question: did you try to boot the notebook using a bootable disk (windows installation disk, Toshiba recovery disk or similar???).
Maybe the Windows system is muddled up and therefore you are not able to boot up the system? In my opinion you should test this option.

Computer wont go past grey apple startup screen with spinning gear help!!!!

Hey everyone Im hoping someone can help. I just did a software update download from Apple. It came back and said that not all of the items were installed and the computer needed to restart. I did the restart. Now it wont go past the grey apple screen with the spinning gear.
Any ideas anyone?
THanks

Hi Ghost516, and a warm welcome to the forums!
You have corruption on your Hard Drive, likely before the updates even.
"Try Disk Utility
1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
The usual reason why updates fail or mess things up, or things don't load/run, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions before & after re-install, then reboot again each time.
If all the above do not resolve the problem, then it's time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space, and don't have any Disk Directory problems...
http://docs.info.apple.com/article.html?artnum=107120
Be sure to use Preserve Users & Settings.
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
If it appears to be time for An Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
http://docs.info.apple.com/article.html?artnum=107120
Be sure to use Preserve Users & Settings.
If none ofthis works report back.

TS3274 IPAD wont activate after resetting to startup screen

Similar Messages

Maybe you are looking for