TS3274 It does not restore-unknown error is shown

It does not restore-unknown error is shown

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

Similar Messages

  • HT201364 I'm trying to restore my iPhone 5 and its gone into recovery mode and won't go out I've gone on to iTunes it says that its in recovery mode and to restore it after about 10 seconds it come up with could not restore unknown error occurred (9) i wo

    im trying to restore my iPhone 5 and its gone into recovery mode and won't go out I've gone on to iTunes it says that its in recovery mode and to restore it after about 10 seconds it come up with could not restore unknown error occurred (9) i wonder if you could help

    you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    If that does not work, take in for service
    Genius reservation http://www.apple.com/retail/geniusbar/

  • Apple TV2 Not restoring - Unknown Error 14

    My ATV2 started showing blank screen (while constantly trying to choose either 720p or 480p), with it's LED blinking rapidly. I've tried to restore / reset it with the remote and in iTunes.
    Nothing works.
    When connected, when I connect the ATV2 to my TV, it shows the iTunes logo and usb cable????
    ATV shows in iTunes (via micro usb), I can start the restore procedure, but at the point of 'Verifying Apple TV restore with Apple' restore drops with the error message  'The Apple TV could not be restored. An unknown error occurred (14)'.
    ATV has not been jailbroken. Latest update was about a month ago...
    Is there something I'm missing?

    Sorry.  Not a great answer but I think it might be dead.  If you can not restore it even from iTunes I am not aware of any other options to get it working again.  You might try a different USB cable, and make sure the USB port is free of corrosion.

  • IPod Touch 4g does not restore/update - error 3194

    Hello,
    I've recently been having a great deal of trouble with my 64GB iPod Touch 4g, which I purchased in maybe late March or early April of this year. I consider myself adequately learned in technology and I've done a vast amount of research into this problem, and have not been able to resolve it, so I took it upon myself to ask my question here.
    Firstly, I am running iTunes on a Windows 7 64-bit system, and I should note that I have found lots of answers to similar problems for people with jailbroken iPod Touches, but I don't think these solutions would work for me since I have not jailbroken my iPod. I have also not yet upgraded to iOS 6, but was on the latest version of iOS (5.x...I don't remember). Also, I bought my iPod from Amazon so obviously the 30-day return window has expired.
    Anyway, on to the problem. Yesterday, my iPod froze and so I reverted to the 'hard reboot' method of fixing it by pressing the home key and the sleep key at the same time, and released when the Apple logo showed up. I waited for the device to reboot as it normally does, except that in all the previous times I have done this hard reboot, while the Apple logo shows up for a little while until the lock screen loads, this time that did not happen. Instead, there were colored bars that showed up on the screen (I don't know how to describe it, exactly) that eventually covered up the Apple logo and faded into a completely white screen. From this screen, I tried the hard reboot again and the Apple logo showed up again, only to be covered up by those bars and fading into white again. I tried rebooting it a few more times, but to no avail.
    I then opened iTunes and plugged in my iPod, but it was not recognised by the computer (presumably because it was not fully on), so I tried putting the device in DFU recovery mode (hold the sleep key and home key until the device tells you to connect to iTunes). At this point, iTunes seemed to recognize that a device was plugged in, but not that it was my iPod because where it normally gives you the information (my iPod, Capacity: ...., Serial number: ... and so forth), the information just read 'iPod' (not 'My iPod', as it was named before this unfortunate event), 'Capacity: n/a, Serial number: n/a', and so forth. I pressed the 'restore' button and there was an error, 3194, on the step 'Verifying restore with Apple'.
    So I went to Google, looking up troubleshooting tips for this particular error, and most of the answers I found were just for people with jailbroken iPods, even though mine isn't jailbroken. I have tried numerous solutions (updating the hosts file in drivers, turning off the firewall, etc) to no avail, and I still get that pesky white screen whenever I try to reboot my device.
    I'm also worried that even if I get my device to restore successfully, then it still might not boot up properly. To be honest, I'm a little more worried about the booting problem than the restoring problem.
    Does anyone have any advice for what I should do in this situation, other than visit the Apple store? There is one in my town but I feel like I've invested a lot in this device and I don't want to pay too much for any repairs that may need to be done (especially considering that this appears to be a software issue and not a hardware one); I'm a high school student and don't have that much money.
    Thank you for any help.

    See the actions for that error here:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    Also
    iPhone Error 3194 - How to Fix iTunes Error 3194?
    Fix Error 3194 from iTunes during iPhone restore

  • Touch will not restore, unknown error (-50) PLEASE HELP!

    I keeping getting this error. Right when i plug my ipod in it shows i need to plug it in to itunes. It says it's in recovery mode and needs to be restored i say ok and then it gives me this error. I'm basically freaking out right now because it's brand new . I really need your help. anything might help please, thank you. I ran a diagnostics test and everything is fine expect it failed the ipod connection test. PLEASE HELP!

    Hey reds12,
    The tips in this article may resolve the issue.
    http://docs.info.apple.com/article.html?artnum=304996
    You could also try uninstalling and reinstalling iTunes.
    http://docs.info.apple.com/article.html?artnum=305409
    http://www.apple.com/itunes/download/
    Jason

  • HT201210 could not restore unknown error occurred (11)

    what's the problem?

    When I search for the error code, everything leads to articles about the device being jailbroken, which would mean Apple doesn't support that device anymore. Can anyone confirm this?

  • HT201263 My ipod touch does not restore properly and comes up with an unknown error (9). What do I do?

    My ipod touch does not restore properly and comes up with an unknown error (9). What do I do? I have tried restoring it a few times and it keeps coming up with this error. Yet on Itune on my computer, it tells me that the ipod software is up to date. ipod screen is just showing the itune logo and a usb connector.

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    http://support.apple.com/kb/TS3694#error9

  • TS1372 a message comes up when i plug in my iPod shuffle (version 1.0.2) and when i click to restore and update message comes up saying iPod could not be restored unknown error occurred (1430)

    a message comes up when i plug in my iPod shuffle (version 1.0.2) and when i click to restore and update message comes up saying iPod could not be restored unknown error occurred (1430)

    The linked article
    http://support.apple.com/kb/TS1372
    has some suggestions.  Did you try doing those things?

  • HP recovery could not restore computer error code 0xe0ef000e

    I bought a nice Solid State drive.  Unfortunately it is not possible to upgrade my system to new hard drive.  It fails every time with HP recovery could not restore computer error code 0xe0ef000e.  This is after removing everything...  graphics card, ram, cd drive...  nothing is plugged in except the keyboard, monitor and mouse.
    Windows 8 strikes again.  Does anyone have any suggestions about how to actually use the recovery disks to reinstall windows 8 onto a new solid state drive.  I hate this computer and wish I would have never bought it actually.  It's been nothing but crap from day one.

    It's the HP 500-023w desktop.  I ended up just buying a Winodws 8.1 OEM disk and installing that on the SSD.  The recovery tool is a bit useless.  Reading through various forum posts it seems I would have ended up spending hours trying to figure it out or else buying the recovery disks from HP.  Just paying $89 for an OEM disk is a good deal by comparison since at the very least the computer has no bloatware on it now.
    What a hugely unnecessary hassle really.  Now if only I could get this heap of junk to boot with a PCI-e graphics card installed I might actually be able to use it with two monitors.  Good grief.

  • Help, the iPhone cannot be restored,unknown error 1015

    Im having this problem and I got paniced, tried to update the software on the iPhone( with the newest) & now I cant even restore it, always comes up with this Warning- the iPhone could not be restored, unknown error 1015. Please, advice what to do? Thanks in advance, any help would be appreciated

    Type "1015" inot the search abr at the top of this page by "Support" and read the appropriate help articles.

  • TS3198 iphone could not updated unknown error occurred(11)

    iphone could not updated unknown error occurred(11) when restoring the iphone 3g. Please help.

    When I search for the error code, everything leads to articles about the device being jailbroken, which would mean Apple doesn't support that device anymore. Can anyone confirm this?

  • TS3694 iphone cannot restore unknown error occured 1015. anyone help please?

    trying to restore my brothers iphone 3 however it comes up with cannot restore unknown error occured 1015. can anyone help

    mazunzo tembo wrote:
    "the iphone could not be restored, an unknown error occured(1015).
    Unauthorized modification of iOS  >  http://support.apple.com/kb/HT3743
    ERROR 1015...
    This Error Code is indicative of the Device being jailbroken / Hacked...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.

  • TS1456 When it is trying to restore it freezes and does not restore.

    When it is trying to restore it freezes and does not restore.

    If no error messages
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • SAP PI Message Cancellation Alert - Message does not have restartable error status

    Hello SCNers
    Version: 7.1
    Scenario: File --> PI -->SOAP
    We have a situation where a PI message  in Integration Engine shows error status.We want to cancel the message in IE but are unable to do so.
    On clicking Cancel for this message in SXMB_MONI, we are receiving an alert "Message does not have restartable error status".
    In SXMSPMAST table, value for ITFACTION is DEL.
    We do not want to run report RSXMB_DEL_TO_ARCH, that would change status of all messages with DEL status to ARCH.
    Is there a way to Cancel or Change the Status of this single message?
    Regards
    Sudheer

    Hi Hareesh,
    Tried that too, but to no avail.
    Strangely, the log shows NO_ERROR_STATE for the cancelation of this message thru RSXMB_CANCEL_MESSAGES.
    But in SXMSPMAST table the status of this message is 14 (System Error - Manual Restart Possible).
    Regards
    Sudheer

  • Yesterday double clicked home button and all of my apps disappeared; cannot shut off i-pad, and syncing it does not restore apps or enable me to use it again. Help!

    Yesterday double clicked home button and all of my apps disappeared; cannot shut off i-pad, and syncing it does not restore apps or enable me to use it again. Help!

    See if this fixes things.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Maybe you are looking for

  • Unable to launch application with webstart

    Hi all, hope someone can help I recently installed j2se 5.0 update 1 and uninstalled my earlier version of 1.4.2_06. Since uninstalling the earlier version I am unable to run my application, I get the following error: An error occurred while launchin

  • Kisight:- How do I get my iSight working ?

    kisight:- How do I get my iSight working ? Trouble Shooting an iSight Camera. Hi, On many subjects Apple has Articles and Documents that can help. In some case they are written by an Engineer or similar and can miss the mark for the average user. In

  • Document View Question

    Is there a way to have the document view in InDesign work the way that it does in Illustrator in that I can change the size of my window w/o anything in the document moving around as well. I will attempt to explain.In Illustrator I can place a 2 X4 s

  • Hot to have my website point to a webpage instead of the default page

    Hi, I have a website set up for iAS and it shows the default page for iAS and there's a link to EM. How can I make my website redirect to a specific page? Thanks. I tried mod_rewrite on the httpd_conf and it isn't working so far. # Loading mod_rewrit

  • Edit in Photoshop Elements is now greyed out

    Edit in Photoshop Elements is now greyed out in Lightroom 3.6 although I have used it before - anyone help me to change this?