TS3274 My apps sound has stopped working.  Music and Internet sound is fine but all games have no sound

My sound has stopped working only on games
Works fine for Internet and music
How do I fix this?

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Similar Messages

  • HT1533 my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in

    my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?

    OS X Mountain Lion: If you can’t hear sound from your speakers
    Read the "If you’re trying to listen through external speakers" section.

  • Satellite C650 sound has stopped working

    I've had my laptop for about 6months and have had no problems with the sound until now.
    I have recently done a windows update and a few hours after my sound has stopped working completely.
    I have updated the driver (Conexant Cx20671 smart audio hd) after that failed i un-installed and reinstalled the driver off the toshiba downloads, after restarting again no sound.
    When i have media player on, the sound mixer recognizes there is something playing but there is no sound coming out the speakers
    _*please can someone help!!!*_

    Ok, this means that the sound driver is OK.
    Please go to the control panel -> sound -> Playback tab
    Here you have to check if the speakers are set as default device.
    Furthermore mark the speakers and click on settings button.
    There you can also check the volume level.

  • Ok..so i was on my iPod 5g listening to music and the sound just stopped working. And whenever i turn up the volume it says that there are headphones in. and my iPod is brand new. please if someone can help it would be awesome!

    ok..so i was on my iPod 5g listening to music and the sound just stopped working. And whenever i turn up the volume it says that there are headphones in. and my iPod is brand new. please if someone can help it would be awesome!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    If within warranty (yours is since the warranty is one year) and not abused, Apple will exchange it at no cost.

  • Using iMovie and the voice over sound has stopped working?

    Using iMovie and the voice over sound has stopped working?

    Are these the internal speakers?
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    Intel-based Macs: Resetting the System Management Controller (SMC)...
    http://support.apple.com/kb/HT3964

  • My app store has stopped working is it a bug????

    my app store has stopped working help plese

    Try resetting the device.
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    Then try the App Store.

  • Hi my iPod touch gen 4 has stopped working properly and App Store will not load but Internet will, also you tube also won't load. Any ideas?

    Hi my iPod touch gen 4 has stopped working properly and App Store will not load but Internet will, also you tube also won't load. Any ideas? I should probaly also add that I have also recently tried to download a screen recorder from safari and a message keeps popping up and saying that it can't verify server, even for this website

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    Files cannot be downloaded from Safari on an iPod touch.

  • HOST APP SERVICE has stopped working

    I keep getting the message "HOST APP SERVER has stopped working" whenever I try to select the home button on my screen. It simply says that Windows will close the application and notify me when a solution has been found, but this has been going
    on for a week and it has yet to message me a solution. The error message isn't very specific as to what is going on and I have no idea what to do!

    Hi kgabriella,
    Please open Event Viewer and check the related logs, if possible, post the information here.
    Further, follow the advice posted by Arnav Sharma, follow the guide to boot into clean boot and check the issue again.
    Besides, see if the thread below would help:
    Catalyst control centre host has stopped working.
    Best regards
    Michael Shao
    TechNet Community Support

  • Satellite A60 - sound has stopped working

    Satellite A60 - sound has stopped working. Downloaded new sound driver from toshiba web site - clicked on sound update icon and it worked, but disappeared every time I restarted.
    Clicked on installshield icon, and install starts, but then has an error message saying 0x80040303, unknown error, setup terminates - this happens every time.
    Tried to download other updates, but it says I didn't register my laptop, which I'm sure I did, and won't let me do it again because it's more than 6 months old.
    Help!!

    Hello
    Try to roll back the operating system to an earlier time when everything works fine. On this way it is not easy to say why this happen. Try also to remove sound card from device manager and restart the unit.
    All drivers for your unit you can find on Toshiba download page under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  • My sound has stopped working on my iphone 4s I did a complete restore and still no luck, any suggestions?

    my sound has stopped working on my iphone 4s I did a complete restore and still no luck, any suggestions?

    If the silent switch is off, no change after inserting and removing the earbuds or headset cable a number of times, and the same after restoring your iPhone as a new iPhone or not from the backup, your iPhone has a hardware problem.
    The iPhone includes a one year warranty.

  • HT1199 Hai, i tried to open itunes on my windows 8 laptop but it comes out with 'iTunes has stop working' notification and need to close the program everytime i try to load it. Please help! thanks.

    Hai, i tried to open itunes on my windows 8 laptop but it comes out with 'iTunes has stop working' notification and need to close the program everytime i try to load it. Please help! thanks.

    Hi ajay-9,
    Thanks for visiting Apple Support Communities.
    The steps in this article can help if iTunes is quitting unexpectedly on your PC:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Cheers,
    Jeremy

  • HT3964 Hi folks, I own am IMac 27" running OS X 10.8.2. The optical drive has stopped working in that it accepts the disc but spits the CD, DVD even my original iMac install DVD back out, after attempting to read the disc. Any of you kind folks any ideas?

    Hi folks, I own am IMac 27" running OS X 10.8.2. The optical drive has stopped working in that it accepts the disc but spits the CD, DVD even my original iMac install DVD back out, after attempting to read the disc. Any of you kind folks any ideas?

    Have you tried one of those CD cleaning Discs yet?
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.

  • My MBA 13" Late 2010 displayport to TV has stopped working, is there a way to troubleshoot the port? Have tried several different ways of trying, but TV still reads "No Signal"?

    My MBA 13" Late 2010 displayport to TV has stopped working, is there a way to troubleshoot the port? Have tried several different ways of trying, but TV still reads "No Signal" while the TV changes resolution as if it were sharing it's screen?

    Hi garyducati,
    If you are having issues with the video out on your MacBook Air, you may find the following article helpful:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Regards,
    - Brenden

  • The app Grab has stopped working

    The Apple app, Grab, is one of my favorites. But suddenly, it has stopped working. When I capture a screen shot, the shot appears blank.

    Screen shots

  • Sound has stopped working on 1 account; works ok on another; how to reset?

    The sound on my main account has stopped working ....
    When I press the volume controls, I get a little "no go" sign and nothing happens
    No sound-related applications are working
    But when I log in as a different user, sound is working fine
    How shoudl I start debugging this one? (it has been working until recently, and I do not think I've installed anything weird...)
    Many thanks, Tony

    Thinking doesn't help, knowing does. Try this. Create a new admin user account, log into it, set up the sound prefPane as desired, and test that sound works. Open that account's Preferences folder (it's in the account's Library folder), make a list of those preference (plist) files, including those in the ByHost subfolder, log out and back into the problematic account, open up its Preferences folder, and move those list plist files into an empty folder on the Desktop, log out and back in and see if the problem's fixed. If so, then slowly move the moved plists back, log out and back in, and eventually you'll figure out which ones are conflicting or are corrupted. Once that's sorted out, deleted any moved ones remaining on the Desktop.

Maybe you are looking for

  • Change documents for created for Customer Master

    An existing program makes changes to the Customer master table KNA1. The changes are made at the table level using the UPDATE command. Since the changes are being made at table level, the change documents are not created. I need to create IDocs for a

  • Disoverer Business Area and Timestamp

    I'm using BI Discoverer 10.1.2.1 and when I create a new business area any Timestamp fields are not imported. They are just not there. I switched one field to a Date and it imported fine. Is it the case that BI Discoverer 10.1.2.1 can't cope with Tim

  • FYI...PowerMac G5 (June 2004), Dual 1.8GHz PowerPC G5 Model: M9454LL/A

    All issues I've posted were a result of a CPU (CPU0) continually failing sortly after initial start up, the G5 would freeze and all fans would soon after ramp to full speed. After multiple attempts to resart the issues would progress to no start chim

  • Password stopped working suddenly

    I walked away from my MacBook Air for a few minutes, and it went to sleep. Now the password to log in to the computer isn't working. I'm currently on the guest account. I'm not really sure how this could happen, and I'm a little worried it was hacked

  • Mulitvalue Properties in XML Forms via Checkboxes

    Hello All, I hope someone can help me with the following issue: I want to create a XML form whicht contains a custom cm-property called "<b>plant</b>" the property is a multivalue property and contains the possible entries <b>plant1,plant2,plant3,pla