TS3274 My cammera does not respond! Why?

Why camera in my new iPad does not respond and is just a back page?

Quit the camera app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that didn't work - try this. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Similar Messages

Since upgarding to Lion I can not save e-mails to files. E-mail does not responding, Why is this?

Since upgarding to Lion I can not save e-mails to files.
I always get the message E-mail is not responding, Why is this?

Since upgarding to Lion I can not save e-mails to files.
I always get the message E-mail is not responding, Why is this?

Address Book does not respond, why

Address book is stuck. I open it and it simply does not respond.

So there is something wrong with permissions on your disk. I am not enough of a geek to do other than make the standard suggestions:
Do all the disk utility repairs (even if this means booting off your repair CD), run all the daily/weekly/monthly scripts (I use Yasu for this), click your heals together three times and say "I wish, I wish, I wish..."
If worst comes to worst, you could try
1) Create a new user
2) Copy ~/Library/Application Support/AddressBook from the old user to the new user (by way of ~/Public)
3) Open AddressBook in the new user
4) If it opens and if the addresses are there, do an export
5) Delete files until AddressBook opens in the old user with an empty address book
6) import the addresses from the new user
Obviously, I have never done this, and the steps above are an outline, not a recipe, but it might work.
A
Good luck.
Dual G5 + 15" MBP 2GHz Mac OS X (10.4.6)

Why is it that when i am receiving a call the phone does not respond to my finger touch?

Why is it that when i am receiving a call the phone does not respond to my finger touch?

If the photos that you have on your iPad came from a different computer that may be why you are getting that message. If you have photos from a previous sync with iTunes you must make sure that you have those photos selected to sync again.
In the photo below, I have a checkmark next to sync photos. The folder from which the photos are syncing is iPhoto on my Mac. You can also see that I have clicked - selected albums, events, and faces automatically. These events, albums, etc will sync every time the way I have this set up.
I can also add new events or albums when I sync if I choose to do so. You have to select the other albums, events, etc. that you want to sync by putting a checkmark in the box next to the event and then click on Apply in the lower right corner of iTunes and they will transfer to your iPad.

Why does Fire Fox 4.9 Beta not work after install, I download,install all is fine, Fire Fox does not respond

Fire Fox 4.9 Beta does not respond after install, I am running 3.6.13 at the moment

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]
* http://kb.mozillazine.org/Browser_will_not_start_up
* http://kb.mozillazine.org/Error_loading_websites

Button does not respond (with attachment)

Hi,
I'm trying to develop a LV program for a psychology experiment to record a participants mouse movements whilst drawing or tracing a picture using the mouse.
My program uses an event structure to generate an event each time the mouse is moved or the mouse button is pressed or released. Upon each of these events the coordinates and button position is recorded to an array.
When they have finished drawing there is a button "Stop & Save" that allows the user to save the coordinate data to a file. This can then be opened by a sister program I'm developing that allows the movements to be replayed and shows where the mouse button was down and up.
At the start of the program there is the option of loading a background jpeg picture to trace over on the screen.
The program then waits for a 'Record' button to be pressed before moving on to record all coordinates there after until the 'Stop & Save' button is pressed.
The problem I have is that the record button does not respond. It doesn't even change state when pressed, even though at that stage it's just sat in a while loop waiting for it to be pressed before moving on to the event structure.
I attach the program for you to look at.
Any help/hints much appreciated.
Thanks,
Dave.
Attachments:
MouseCoordinatesForPW.vi ‏178 KB

altenbach wrote:
Your overall program design is higly flawed. This calls for a single state machine with an event structure that handles all FP events. All your locals can be handled by shift regsters. Get rid of that useless stacked sequence!
Frame 0: Initialization belongs to the left of the state machine. CoordinatesArray should initialize a shift register (no locals needed). Use a boolean shift register to set state to either recording or not. Event for "record, value changed" will switch the boolean to be used on the other states.
Frame 1: "Clear" and "stop" need to be inside their own events. Running it parallel to the event structure is a no-no! Do you really want to record mouse movements on the entire FP or only on the picture area?
Frame 2: Why waste an entire frame on this? Here you clear it and in the next frame you prepend the cleared string to your data. Makes no sense.
Frame 3: An autoindexing FOR loop would be the right choice. A single formating operation can handle multiple values.
Frame 4: Writing the "coordinate string" seems useless, since you just cleared it two frame earlier. You are writing an empty string to a file! Right? Why invert the "canceled?" output, just swap the cases instead.
Frame 5: Unecessary! Once the VI runs out of code, the VI will stop automatically. The "stop" function also does not "close the program window" as you seem to indicate with a diagram comment. Check the online help.
Message Edited by altenbach on 05-22-2007 09:23 AM
Hi, thanks for your reply.
The reason for the main stacked sequence was to get some order to the program, my programming background's text based and as such I like to think of a program running in a list/sequence order. LabView seems strange when you've been used to programming in asm or C. Does anyone know of any books or online documentation for people migrating from text languages to LV? - I haven't found any.
"Frame 2: Why waste an entire frame on this? Here you clear it and in the next frame you prepend the cleared string to your data. Makes sense."
- The string 'CoordsArray' is cleared to make sure it's empty before chars concatanated to it in the next frame. Call me old fashioned but is it not good practice to clear out any junk in a variable rather than just assuming it's empty?
"Frame 3: An autoindexing FOR loop would be the right choice. A single formating operation can handle multiple values." - not sure what you mean by that?
"Frame 4: Writing the "coordinate string" seems useless, since you just cleared it two frame earlier. You are writing an empty string to a file! Right? Why invert the "canceled?" output, just swap the cases instead."
- No, it's not an empty string since in the previous frame the coordinates array is converted to numbers and concatanated to it. Trust me, it generates a file with lots of data in so no way is it an empty string!!
- Yes, you could just swap the cases instead of inverting the 'canceled' output but sometimes it reads better to say 'if NOT cancelled then DO theTask, ELSE DO nothing' rather than 'if cancelled DO nothing ELSE DO theTask'. Not sure if that makes sense but I guess it's just personal prefference there.
"Frame 5: Unecessary! Once the VI runs out of code, the VI will stop automatically. The "stop" function also does not "close the program window" as you seem to indicate with a diagram comment. Check the online help."
- I wasn't sure how that one would work. I wanted the final exe version to close the program window when the program comes to the end, what's the best way to do that? In the past I think I used the 'Exit' function but this would annoyingly quit LabView at the end of each trial run whilst still in the development stage.
Thanks,
Dave.

WLS 10.3 Does not respond to GET requests (HTTP/1.0)

Hi All,
I have 2 WLS servers running on separate physical hosts behind a cisco CSS load balancer. The keep-alive method the Cisco CSS uses is HTTP GET messages. This keep-alive method does not appear to work, because my WLS servers are not responding to the GET requests with HTTP 200 OKs (as would be expected). These GET messaged appear in the access logs, as follows, but from traces taken on the host, there are no HTTP 200 messages ever transmitted. I see no exceptions or errors related to this in the server or access logs.
WLS access log:
192.168.1.1 - - [14/Dec/2011:18:23:35 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
192.168.1.1 - - [14/Dec/2011:18:23:45 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
192.168.1.1 - - [14/Dec/2011:18:23:55 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
Interestingly, If i use a http-ping tool to send HEAD messages, the server correctly responds with the 200. A major difference between the CSS and the ping-tool, is that the CSS is using HTTP/1.0 where the ping tool uses HTTP/1.1. The GET requests are formatted a bit differently too. Below is how the different GET messages are formatted. Is it possible that WLS 11g does not support HTTP/1.0? Is there any method of debugging that I can employ to troubleshoot this further? As mentioned I do not see any errors or exceptions in the server logs or access logs....
Many thanks, in advance.
HTTP-PING TOOL HEAD MESSAGE - weblogic responds to this message
HEAD /APPDIR/index.jsp HTTP/1.1
Host: myhost.domain.com:7005
Accept: */*
LOAD BALANCER HEAD MESSAGE -weblogic does not respond to this message
HEAD /APPDIR/index.jsp HTTP/1.0
Connection: Keep-Alive
User-Agent: Mozilla/4.06 [en] (WinNT; I)
Accept: image/gif, image/x-bitmap, image/jpeg, image/pjpeg, image/png, */*
Accept-Language: en
Accept-Charset: iso-8859-1,*,utf-8
Host: 192.168.1.66

Other than failing the base address test, does the device seem to work in the test panels? One quick test would be to open the digital I/O panel, change some of the lines to output, toggle the logic levels, and see if the line states track the logic levels. Also, you can switch to the Counter I/O panel, change the mode to simple event counting, set the event source to the internal 100KHz clock, and start the counter. If the counter is working properly, you should see the counter value increase at a rate of 100000/second.
If the test panels seem to work OK, you may still be able to use the board, despite the resource test failing. I still can't explain why the test fails, though.
Joe

Perl Flip 8230 & XP 64-bit - Desktop manager does not respond

Greetings.
I am using a brand new Perl Flip 8230 (black), along with the new software (the CD has a timestamp of 2008.12.18, well after the last update of 2008.11.17).
When I install the software, it claims to be the 4.7 version, but I am having quite a few issues with it. First of all, while all the drivers install nicely, and the phone is recognized by the connection software, I am unable to *properly* launch the Desktop Manager.
An inital launch (click on icon) of the Desktop Manager causes it to appear in the Task Manager, but it never ends up showing up on the screen. I even tried waiting for 1/2 hr, no dice. A second attempt at launching (without shutting down the process first) does cause it to appear, but it ends up completely unresponsive. There is still only one executable in the Task Manager (the second attempt did not launch a second copy), but what exists on the screen does not respond to any actions.
The window that appears is almost completely blank - the dark grey background-image is visible, but pretty well no other text or icons of any kind exist aside from a large "Menu" at the upper left, which is also nonresponsive. As well, trying to close the window by using the red X at the upper right is completely unsuccessful. In order to close the program, I need to go to the task manager, find the process, and "End Process Tree". Nothing else works.
Finally, the window that does appear also has a version number at the bottom in tiny text - version 4.5 of the desktop manager. HUH?!
I tried to install a downloaded version of 4.7 (in case there was a mix-up at the factory), but it claimed that a newer copy of the software was installed. Somehow "4.7" is older than "4.5". Strange, that. Selecting the "desktopmgr.exe" file to run in compatibility mode as plain old "XP" also does not work.
I tried to repair the installation, no dice. I have now uninstalled the software in preparation of using the 4.7 version straight from the Blackberry website. I will report back on how well that works.
As a final note, I am running Windows XP 64-bit, with the latest service pack (SP2) and all the latest patches and updates (SP3 does not exist for XP 64-bit). I cannot install the software on a 32-bit version of XP because I do not have XP 32-bit on any of my computers. Nor do I have Vista (either 32-bit or 64-bit). I have Linux (5 computers), OpenBSD (3 computers), OpenSolaris (1 computer), Windows 2003 64-bit (2 servers), Windows 2008 64-bit (1 test machine) and several other experimental platforms (HaikuOS, BeOS, etc.), but no XP 32-bit. Sorry.
My other half's computer is an older 1Ghz PowerPC4 iMac (2nd gen iMac - "lampshade" model) running 10.4 (most recent update), but that computer is not one I want to use. I am also unsure if the Blackberry software is capable of running on PowerPC Macs, as it may be Intel-only (I haven't had a chance to check yet).
If someone has any idea why my Desktop Manager is completely unresponsive, please help.
And yes, I did reboot after installation. I seriously doubt that this is an ID-ten-T error. PEBKAC does not apply!!

An installation of the downloaded 4.7 software did not function; all symptoms were idential to the version supplied on CD.
I am shutting this thread down in favour of a post in a more appropriate category. Please provide any replies in that thread.

HT201412 My Ipad is not responding. It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

My Ipad is not responding. It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

The pull down menu or icon for printing does not respond. The only way I can print a web page is by right clicking with the mouse and selecting print? Your comments please

When I try to print a web page by selecting the print icon or by the pull down menu -print, nothing happens. It does not respond. I have to right mouse click and then select print, which then works. Why is this happening

Try using the Add Bookmark Here ² extension. You can drag the Add Bookmark window to the size you want to see. <br />
https://addons.mozilla.org/en-US/firefox/addon/3880

I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either.

I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either. Anyone have an idea as to what to do?

I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.

IPod does not respond at all when plugged in

Alright, this topic is for people who have had this exact problem only. I don't want to get this confused with other problems and have people trying to help troubleshoot multiple problems and get things mixed up. Here's the problem.
After updating to v1.1.2 of the iPod software, the iPod does not respond when plugged in. The iPod still works fine when not plugged in. It plays music and both the standard and shuffle play modes work accordingly. The problem is when you plug the iPod in, it doesn't charge and it doesn't mount. The orange blinking light does not come on. While plugged in, it works the same way as it does when you're listening to music with it. It's as if the iPod's USB connector is dead. Here is my original post and description of the problem.
Alright, so here's my story. I bought my 512MB Shuffle in April. It has worked perfectly fine since I got it. Last night, I updated to v1.1.2 of the iPod software, clicked no when it asked if I wanted to restart, added some songs to the iPod, then restarted. As of this morning, I went to listen to some music while out for a bike ride, and I was greeted with the red battery light. I thought it was a bit odd since I had left it plugged in overnight. I figured, what the heck, I'll just plug it in and let it charge when I get back. When I got back, I plugged it into my PC and left for a while. I came back later and went to grab my Shuffle and I noticed it was cold, which was unusual after charging for a couple hours. I plugged it back in, a bit frustrated, and it never came up in Windows. I looked at the iPod plugged into the back of my PC (a high powered USB port) and sure enough, no orange light. No lights at all. I can still slide the switch to one of the play modes (standard play or shuffle) and play music for a couple seconds before it stops and says the battery's dead again. It works.. I mean it turns on and plays music, it's just not charging or mounting when I plug it in. I tried multiple computers and USB ports, none of which worked. I would really like some help with this considering it IS my only source of portable music and I'm not going to go pay $50 to talk to tech support or have it sent in for repairs. That's half of what it's worth.
I've tried uninstalling all iTunes/iPod related software from the PC I normally use it on and reinstalling it. That didn't work. I also tried uninstalling again and installing the last known working version of the iPod software, still no results. The only thing I havn't tried is giving it a good beating... Not that I would. Anyways, I hope there's a solution to this that doesn't involve buying a new one.
Here's a rundown of the computers I tested it with.
500MHZ G4 Cube (384MB RAM/Mac OSX Tiger)
400MHZ G3 iMac (384MB RAM/Mac OSX Tiger)
4.2GHZ AMD 64-Bit running Windows XP Service Pack 2 (my PC)
515MHZ Dell running Windows 2000 (256MB RAM)
UPDATE: The BIOS won't recognize the iPod, so it has nothing to do with my computer. Somehow, installing v1.1.2 of the iPod software made it so the iPod itself has USB problems. The iPod works to the extent of playing music and showing the battery charge level. I get no response at all when I plug it in, from the computer or the iPod.
I'm going to have to agree with Philip Harhay on this one. The original 10GB iPod I bought 3 years ago came with a full one-year warranty, no extra charges. I am disappointed to see the Shuffle only coming with a three-month warranty.
------------------------------------------------------------------

Help! I just purchase an iPod Shuffle for my son's birthday and I cannot get the darn thing to show up on my iMac G5. I am running OS 10.4.2 and I have downloaded the latest iPod and iTunes software. When I try to restore my iPod to the factory settings it tells me to plug the iPod into the computer, but it is plugged in. I have tried different USB ports, too. I'm running out of ideas and so is the trouble shooting Apple site. I was hoping someone out there might have some ideas.
It showed up at first and I transferred a few songs from the iTunes to the iPod but I couldn't get them to play, so I plugged it back into the USB and the icon never came up.

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
help?

command-option-esc keys and force quit Mail. Then relaunch.

ITunes does not respond when I try to play a movie

I just installed the latest iTunes update onto my Windows 64-bit computer and now, whenever I try to watch a movie on iTunes it freezes and does not respond. I have to start the task manager and end the program manually. I have unistalled iTunes and reinstalled it but I still face the problem of iTunes freezing and not responding. I have a pretty good collection of movies and would love to watch them cause well I paid for them but i cant because it keeps FREEZING. Also, it wont let me view trailers on the iTunes store so I'm thinking something is wrong with the 'video' part of my iTunes. Please help.

Although it's not such a good bet with a freeze as with the "iTunes has stopped working" messages, it would do no harm to try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

Firefox takes 6 minutes to load and then does not respond so what should I do?

After starting Firefox on my Mac (10.8) it takes 5 to 6 minutes to appear. A minute or so later the "Bookmarks and History system will not be functional because one of the files is being used by another application" message appears and Firefox either does not respond or responds very slowly to various mouse clicks and such. For example, I wanted to disable all plug ins and when I clicked on Tools and Addins it took three minutes for the tab to open and after 20 minutes still nothing had appeared on the tab. I've tried restarting Firefox, restarting the Mac, resetting Firefox to the default settings, starting Firefox in safe mode, renaming the places.sqlite file, uninstalling Firefox and reinstalling from a fresh download, performing a complete uninstall and reinstall in which I remove the Firefox folder from the Application Support folder after uninstalling, and relocating the plugins folder. I've tried just about everything in every Firefox support article that there is and nothing works. Any suggestions would be very helpful.Thanks.

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back soon.

TS3274 My cammera does not respond! Why?

Similar Messages

Maybe you are looking for